The Feeding tab in Livestock is where cattle on feed are fed and checked each day. Round is the morning feed, pen by pen. Pens has a card for each pen with the mob in it, its ration, today's feed, weight and costs. Plans holds the rations and step-ups. Use this article to do the round, set up and trace pens, put stock on feed, sort cattle and take a mob off feed.
Quick answers. Press Fed on each pen as it is fed; the row gets a tick, so the same feed can't go in twice by accident. Each pen can be on its own ration, because each mob on feed has its own feed plan. Once pens are set up, Move and Receive stock list your pens beside the paddocks.
Where to find it
On a computer or a phone, open More → Daily work → Livestock, then the Feeding tab, and choose Round, Pens or Plans at the top. Feeding opens on Round once anything is on feed; before that, on Pens (or Plans on a farm with no pens). Rations and step-ups are under Plans (see Rations and feed plans).
Do the morning round
Round lists every pen on feed, in pen order, and every mob on feed in a paddock, with the kilograms its plan says for today.
Check the Day at the top. It starts on today; pick an earlier day to fill in one you missed. A day still to come, up to 60 days ahead, reads Feed plan · 13 Nov: each pen's planned kilograms as the plans stand today, with nothing to record. Feed is recorded on the day. Back to today returns to the round.
On each row, change the number if you fed something other than the plan.
Press Fed. The row gets a tick, such as Fed 1.2 t, and the next row still to feed comes up.
With two or more rows left, Record the rest as shown saves them all at the kilograms showing.
Undo on a fed row takes back the last feed and puts the stock back, after asking "Take back 1.2 t?".
Another feed records a second feed on purpose, on top of the first.
Not today notes the pen as skipped (Not due, Still had feed or Other) without counting it as zero feed. Undo takes the skip back.
A pen holding two mobs is one row; its feed is shared between them by head.
Self-feeder and hay-only pens are a check: they say when they were last filled or baled, with Fill feeder or Bales out.
A mob on no feed plan in a pen is named on the pen's row ("Not counted: … not on feed"), with Put on feed, or Feed like and the pen-mate's name.
If the rations' ingredients are linked to Inventory, Where the feed comes out of under the round shows each feed once and the silo or shed it comes out of. If a feed is still to pick, tap the silo or shed. See Rations and feed plans.
The week, like the paper sheet, under the round, shows what went to each pen or mob each day, with the plan in italics on days nothing was recorded.
You don't have to record feed every day. The plan counts each day's ration and prices it; a feed you record replaces the plan for that day.
What the Pens view shows
Pens are listed in number order, whatever their type: Pen 1, Pen 2 and on to Pen 13. Each card is titled by the pen, with its type (Induction, Full ration, Hospital or Other) as a tag, and "57 hd · holds 60" for a pen with a head limit. A pen with more head than it holds says how many over, such as 3 over for 63 head in a pen that holds 60.
A mob on feed shows its head, entry day, days in this pen, Day 14 on feed, Ration (kg/hd/day), Feed today, Weight with its daily gain, Feed cost, and with a target set, Will this ration get there? Add sale target & costs for margin adds the margin today and at target. Its buttons are Record feed (Feed-out on a self-feeder), Weigh, Move, Edit plan and Exit.
A mob not on feed says Not on feed, with Move, Add to feedlot, and Feed like the pen-mate when a mob on feed shares the pen.
An empty pen is one slim line that says Empty.
On each pen: Feed (opens the round at that pen), Hay & straw, Sort and the pencil, with the pen's tanks and troughs at the foot. Above the first pen: Feed pens (opens the round), Weigh & sort, Feed records, Add to feedlot and Add pens. On feed, not in a pen follows the pens, for mobs on feed in a paddock or another place, and Finished programs lists the last five mobs taken off feed.
Set up pens
In Feeding → Pens, tap Add pens. The first time, How adding pens works shows four steps; tap it to open them again later.
Check Places your mobs are already in, if it shows: places your mobs were typed into before pens, like "Pen 5". Tick each one that really is a pen and it becomes a pen with its mobs already in it. Places named like pens start ticked; leave places like "Yards" or "Off farm" unticked.
Or add new pens: A numbered run (such as Pen, 1 to 12, and the kind of pen), or One pen by name with how many head it holds.
Tap Add 12 pens (the button counts them). The confirmation offers Trace them on the photo.
Capitals and spaces don't matter: "PEN 6" is Pen 6. You can add up to 100 pens at a time, and no two pens can share a name.
Edit or retire a pen. Tap the pencil, change the Name, Kind of pen, Holds (head, optional) or Notes, then Save pen. Mobs in a renamed pen read as being in the new name. Retire pen takes an empty pen off the list; its history stays.
Trace your pens for the yard map
The Yard map card sits above the pens. Trace each pen once on the satellite photo and it shows your yards from above.
Tap Trace your pens on the card (Trace pens once some are done). The first time, How tracing pens works shows the steps.
Drag the photo to your yards and zoom in with + and − or two fingers until you can see the rails.
Choose the pen under Pen to trace, then tap each of its corners in turn and the first corner again (or Finish shape). Drag a corner to fix it; Undo, Delete corner and Start again are under the photo.
Tap Save (it names the pen). Phase moves on to the next pen not traced, with the ones done shown behind. Tap Done to finish.
On the card, a pen with stock is a solid outline and an empty one dashed, each named (zoomed in, with who is in it and how many head). Tap a pen to list its mobs and open one. Traced pens also show on Mobs → Map. Remove outline takes a pen off the map without touching the pen.
Put a mob on feed
Put on feed is three steps. It opens from a mob's More → Put on feed, a round row, Needs you on Mobs, or Put the group on feed after Receive stock.
Under Which stock, tick the mobs going on feed, then Next.
Under Which step-up, pick the plan: Same as a pen-mate already on feed comes first, then your saved feeding regimes, then Phase starter step-up and One ration from day one. With more than one regime, none is picked for you.
Under From when, choose Starting today, Started on a date (days before today count as estimated, never as fed) or Already on the full ration, and add Average weight in (optional). Select Next.
Check says what they get today and when it next changes. Tap Put 118 head on feed.
Feeding then opens on the round at their pen. Nothing counts as fed until it is recorded on the round.
The full editor. Change the plan in full, and Add to feedlot on Pens, open the full sheet: Which mob?, Entry date, Head going on feed, Starting avg weight (kg) or Import entry weights by EID (CSV), Feedlot location, Target weight (kg), Target exit date and the Feeding plan. Tick Induction already done: start on the full ration from the entry date. for cattle already on full feed, then tap Start on feed. The entry date can't be after today or before the mob's last move.
Move cattle between pens
Tap Move on the mob: its pens are listed first. Choose All or Only some of them, the pen, and, if a mob is already there, whether to keep them apart or Make one mob with it. The feed plan moves with the mob. See Move, split, join or merge mobs.
Weigh and sort cattle into pens
Use this on a weigh day to draft cattle into pens by weight.
Tap Weigh & sort above the pens, or Sort on a pen.
Under Which cattle, tick the mobs to sort.
Under Sort by, choose Scale weights, or Head counts for untagged cattle.
With Scale weights, pick the Weighed on day (tap Import today's scale file if it isn't in yet), the number of Groups and the weights under Cut at. With Head counts, type how many head go to each pen, one mob at a time.
For each group, choose the pen and whether it joins the mob there (Join), stays as the mob it came from (Stay as) or starts a new mob (Start a new mob).
Check the Sorted on date and What happens, then tap Sort 57 head (the button counts the head).
Head, tags, any withholding period and the feeding program move together. A new mob keeps its day on feed, and a mob sorted out completely closes. Tagged animals keep their weights from pen to pen.
Take a mob off feed
Tap Exit on the mob.
If the ration has hay fed ad lib, Hay true-up shows. Enter the hay put out and left over if you know it; it starts from any bales put out with Hay & straw.
Set the Exit date, and a Final avg weight (kg) if you have one.
Under Where do they go?, choose Sold, Paddock or Stay put.
Tap Exit feedlot (Exit & record sale with Sold chosen; the sale opens next).
Finished by mistake? Tap Back on feed under Finished programs. It goes back on from its own entry day, and the days since it finished count as fed on the plan unless you record feed for them. Remove deletes the program and its feed-outs, and can't be undone.
Good to know
Days on feed count from the entry date; change it with Edit plan (see Rations and feed plans). Days in the pen count from the mob's last move into it; change it with More → Edit details → Moved-in date.
Feed pens and a pen's Feed open the round. The old Feedlot tab is Pens, and old links still land there.
If something doesn't look right
Feed today counts only one mob in a shared pen. The card says, for example, "22 of 57 hd in this pen are not on feed. Feed today counts the 35 that are." Tap Feed like on the mob marked Not on feed, or move it to Make one mob with the mob on feed.
I pressed Fed on the wrong pen. Tap Undo on that row and confirm Take back. The feed goes back on stock.
The round says "Nothing on feed". No mob is on a feed plan yet. Use Put on feed on a mob.
There's no Yard map card. It shows once the farm has a pen.
Scale weights can't be chosen. No weigh day is recorded for those mobs. Import the scale file, or use Head counts.
The sort won't save. It can't be dated before the mobs last moved. A mob with a joining still open can't be sorted: record the sire out first, or use Move → Only some of them, which takes the joining with it.
Retire pen is greyed out. Move the mobs out first.