Water lists your water tanks, troughs, dams and bores, each with its own history of checks, levels, repairs and water tests. Use it to add a water point, record a check or a level, file a water test, and see which troughs haven't been checked this week.
Quick answers. A trough can be linked to a feedlot pen: choose In a pen under Where is it when you add it, or open it and tap Edit trough. It then shows on that pen's card in Feeding → Pens. Water test results, such as pH or EC for salty stock water, go on the tank, trough, dam or bore as a Water test.
Where to find it
Water is one screen in two places, and both show every tank, trough, dam and bore:
Livestock → Water, beside the mobs. On a computer or a phone, open More → Daily work → Livestock, then the Water tab.
Inventory → Water, beside the silos and fuel, handy for spray and rainwater tanks. More → Grain, water & stock → Water Tanks & Troughs opens it too.
Water isn't listed under Inventory → Locations. When a farm has any, a line there links across to Water.
Who can use it
Anyone who can edit the farm can add water points and record on them. Owners, co-owners, admins and staff can by default, and staff don't need permission to edit Inventory. By default, advisers and viewers can look but not change anything.
Add a tank, trough, dam or bore
Open Livestock → Water and tap Add tank or trough, or use Add a tank, Add a trough, Add a dam or Add a bore under the list in either place.
Choose Water tank, Trough, Dam or Bore, and type a Name. Only a name is needed.
Add the Capacity if you know it (litres; megalitres for a dam). For a tank or dam, add How full now as a rough percentage. A bore has no capacity or level.
For a tank, dam or bore, pick what it is Used for: Stock, Spray, House or Fire fighting (any that apply). For a tank, trough or dam, pick where the water comes from under Water from (such as Bore, Rainwater or Carted) and type the source's name if you like.
Under Where is it, choose In a paddock and the paddock, In a pen and the pen (offered once the farm has feedlot pens), or Neither. A tank or trough is in a paddock or a pen, not both.
Open More details: fed from, notes, map pin, photos (on a bore, More details: notes, map pin, photos) to add what feeds it (Fed from, or Supplied by on a trough), notes, photos and a map pin. Use my location drops the pin where you are standing; Drop pin on map lets you tap the spot.
Tap Add tank (or Add trough, Add dam, Add bore), or Save and add another.
Everything but the name can be added later. To move a pin, open the water point, tap Move beside its map pin (Place on map when it has none) and tap where it stands.
What a tank is used for. The card then reads, for example, "Water tank · For spray · North 3 · Carted". A tank that doesn't say what it is for counts as stock water, and a trough is always stock water. A spray, house or fire-fighting tank opened from the farm map, its Phase tag or a favourite opens in Inventory → Water; stock water opens in Livestock → Water.
Dams and bores. A dam takes levels like a tank, sized in megalitres ("12.5 ML"). A bore takes checks, faults, water tests, cleaning and maintenance, but no level. A tank or trough's Fed from (Supplied by) can name a dam or bore, so the dam lists everything it feeds; a turkey's nest can be fed from its bore. A source typed as a name under Water from before dams and bores could be added stays as it was.
Record a check, level, leak or fault
Open the tank, trough, dam or bore. It shows the estimated level and litres, when it was last checked and by whom, whether water was there, open problems and the latest water test.
Tap Check, Level, Problem, Water test or Cleaned, or More for every kind of record.
Fill in what applies and check When it happened.
Add notes, and photos or files, if you like.
Tap the save button, which names the record, such as Save check or Save water test.
The kinds of record are Check, Water level, Water quality, Cleaned, Maintenance / repair, Leak found, Leak repaired, Pump / float / valve, Water test and Note. A check asks Water there? and a Result of All good or Problem found.
Record a level in one tap. Each tank and dam card has Level beside Check. On the level form, Full, ¾, ½, ¼ and Empty fill it in for you, or type a percentage or litres (litres needs a capacity). Whoever has carted water to a spray tank can record it in seconds.
On the water point's Phase tag, Record level, Record a check, Report a fault, Water test, Cleaned and Report leak ask one question at a time, only what each record needs: How full is it? (Full, ¾, ½, ¼ or Empty, or type a percentage, or litres once the tank's size is set), How was it? (water there, then All good or Problem found; on a fault, which part), What did the test find? (the laboratory, the results as the lab printed them, and the report and photos), then When was it?. A problem asks for its notes right there, with Make it a job. A level over 100% can't be saved; more litres than the tank holds is named and the button reads Record anyway. Editing a record already kept opens the full form.
Problems stay open until they're fixed. A leak or fault stays open until a repair marks it fixed. Tap Mark fixed beside an open problem to record the repair, or tick it under Fixes when you record Cleaned, Maintenance / repair or Leak repaired.
Fix a record. Each record in the history can be edited or deleted. Deleting a repair opens the problem it fixed again; attached files stay in Documents.
Take one out of service. When a trough, tank, dam or bore is moved, shut off or broken for a while, open it and tap Out of service, then say Why (for example, taken to another pen). Its card says Out of service and for how long, and it raises no water alerts while it is out. Make it a job gives the fix to someone. Tap Back in service when it is working again.
Record a water test
Open the water point and tap Water test.
Add the Laboratory, the Sample / report no. and the lab report as a PDF or photo.
Under Results, type values such as pH, EC, nitrate or E. coli as the lab printed them, if you want them on screen.
Tap Save water test.
Phase shows results as recorded. It does not rate water as safe or unsafe, so check results against advice for your stock. Lab reports and photos are also filed in Documents, with test reports under Water tests.
Find what needs attention
The top of Water counts Tanks, Troughs, Open issues and Not checked in the last 7 days. Needs attention lists open problems, with Mark fixed.
Filter the list to Tanks, Troughs, Dams & bores (once you have any), Needs attention or Not checked this week. Once a tank is marked for something other than stock, filters such as Stock water and Spray water appear too.
Switch between Cards and Map, and group the cards By farm or By pen or paddock (each pen, then each paddock, then Not in a pen or paddock). Each card names its paddock or pen and the mob standing there, such as "Trough · Pen 5".
Water points show as pins on the main farm map with their latest level.
Scan the Phase tag on one to record right there. A tank or dam leads with Record level, a trough or bore with Record a check (see Put Phase tags on sheds, silos, tanks and machines).
Where the stock are. In Feeding → Pens, each pen's card ends with its tanks and troughs, each with when it was last checked and anything wrong; tap one to open it. A mob's sheet has a Water section with the tanks and troughs in its pen, or its paddock for a paddock mob. Water points linked to a paddock before pens could be chosen stay linked and show on that paddock's mobs.
Water monitors and alerts
Everything is recorded by hand. There is no live tank-level sensor connection yet. Water says so in a note, Recorded by hand, ready for sensors.
More → Integrations → Weather stations & sensors, then Add sensor, has Tank and Trough entries. These hold a pin on the map and a reading you type in. They don't read a monitor, and they don't change the tank in Water.
Overview alerts. Only stock water counts towards the Livestock widget's water alert on Overview, so a carted spray tank running dry is not a stock-water warning. The Tanks & troughs tile on Overview opens Inventory → Water.
Ask Phase Agent. It can answer "When was North Tank last checked?", "Which troughs haven't been checked this week?", "Show me the latest water test for the House Bore", "Which water points have maintenance issues?", "What's the current level of North Tank?" and, for a pen, "What's the water like in Pen 3?". Recording a check by voice or chat isn't available yet.
Good to know
Deleting a water point (Delete on its sheet) deletes its records too. Its files stay in Documents.
Renaming a pen keeps its tanks and troughs linked.
If something doesn't look right
In a pen isn't offered. The farm has no feedlot pens yet. Add them in Livestock → Feeding → Pens → Add pens.
Level isn't on a trough's card. Troughs take checks rather than levels. A trough with a capacity set can still record a level from its sheet.
Litres won't save on a level. Set the tank's capacity first, or enter a percentage.