A Phase tag is a QR code you stick on a silo, shed, tank, machine or implement. Anyone on your farm can scan it with their phone, see what is in it or what is due, and record a load, a fill or a pre-start on the spot. Tags come as magnets, and as stickers for machinery. Both are free.
Get more Phase tags
Phase tags are free, and Phase posts them to you.
Open More → Daily work → Phase tags.
Tap Actions → Get more tags. An email to support@phase.ag opens, headed "More Phase tags", with your farm filled in.
Say how many stickers or magnets you need and where to send them, then send it.
The email address under "Need more?" on a tag's This tag sheet does the same. You can also ask in the help chat: the team reads it.
Before you start
Whoever scans must be signed in to Phase and a member of your farm before they see anything. Invite contractors and truck drivers before harvest, not at the silo at night. See Invite someone or join another farm.
Setting up, moving, taking off and retiring tags needs permission to edit Inventory. Owners, co-owners and admins have it, and staff have it by default.
You don't need to delete or re-add the silos, sheds, tanks or machines already in Phase. You pick the existing one when you set the tag up.
Set up a new tag
Stick the tag on.
Scan it with your phone's camera and open the link, or tap Scan tag on the Phase tags page. Phase asks What have you stuck it on?
Tap Grain & hay storage, Chemical shed (or any shed or store that holds stock), Tank, Machine or Implement.
Tap the one it is on. Phase confirms, for example "Tag M55A-GEK is on Silo 7". From then on a scan opens straight to Silo 7.
If it isn't in Phase yet. Tap Add a new silo or shed (or Add a new tank, Add a new machine and so on), give it a Name and Kind, and tap Add and tag it.
A silo, bin, grain or hay shed or stack asks its Capacity in tonnes, or bales for hay.
A tank asks its Capacity in litres (tonnes for a Fertiliser bin). A Fuel tank also asks Fuel: Diesel, Petrol or AdBlue, already picked when the name says it ("Diesel tank 3"). Phase uses your farm's Diesel, Petrol or AdBlue product, or adds it to Inventory as a fuel in litres.
Sheds, machines and implements need only a name and kind.
Can't see it in the list? Machine and Implement both list the whole fleet, matching kind first, but not retired machines. Troughs, dams and bores are under Tank. The only water point you can add from a tag is a Water tank, so add a trough, dam or bore in Inventory → Water or Livestock → Water first.
Tag a shed or tank from Inventory
Open the shed, store or tank in Inventory → Locations.
Stick the tag on.
Tap Scan the tag under Phase tag, or type the code printed under the QR square.
A tag already on something else on the farm asks before it moves. Add another puts a second tag on the same place. Silos, water points and machines don't have this section, so tag them by scanning.
Scan a tag
Point your phone's camera at the square and open the link, or tap Scan tag on the Phase tags page (Scan on a phone). If the link opens in the phone's browser, tap Open in the Phase app, or Sign in to Phase and you're brought back to the tag.
When the camera won't read a tag, tap Actions → Type a tag code on the Phase tags page. Type the 7 letters and numbers under the QR square (like M55A-GEK) and tap Open tag.
A tag on another of your farms offers to switch to that farm. The code is a name, not a key, so a photo of a tag gives nothing away.
What a scanned tag shows
At the top are All tags, Edit and a ••• menu, then what the tag is on and a line such as "Machine tag · T9R8-A7B". Below is that thing's own panel. Every button opens the same form as its own page, so nothing is recorded anywhere new. A silo or tank with no capacity shows Set its capacity to anyone who can edit it.
A silo, bin, grain or hay shed, or stack. In it now shows tonnes (or bales), a fill bar, the percentage of capacity, and labels such as Sealed, Withholding, Gas-tight and Aeration. Then:
Load in and Load out open the step-by-step load forms with that silo already chosen.
Photo a docket: Phase reads a photo or PDF of the weighbridge ticket or receival docket into the load form, and keeps it in Documents against the silo unless you untick it.
Say what happened: tap Speak once and say the load, such as "took 28 tonne out to the receival site, docket 44871". Your words come up as you talk, and the tonnes, direction, crop, paddock and docket number drop in underneath as Phase picks them out. Tap the words to fix them, an × to take one off, or Out of it to change the direction, then Check and save. Or type it works too.
Record a check, Move grain (Move hay for hay) and Fumigate.
What's in it: each parcel with Out, Move, Correct and Edit (variety, grade or season). Correct and Edit need permission to edit Inventory.
The last three Activity entries, and Open in the Yield Centre, which opens the silo on the Yield Centre's Storage tab.
In the Yield Centre, Record load → Scan a silo's tag opens a scanned silo the same way, with its own Load in and Load out.
After a docket photo, answer Which way did it go? and tap Check and save the load. A docket or a spoken load opens Load in or Load out on its last step, filled in. No load is saved until you check it and press Save.
A silo sealed for fumigation says "Sealed for fumigation. Do not open or enter." Its load buttons are locked, and Fumigate becomes Mark opened, to record when it was opened and ventilated.
A chemical shed, store or workshop. The same screen as tapping it in Inventory → Locations: Add product, Stock out, Stock in, Count stock, Safety sheets, the emergency details and what is stored there, with Move products beside it. Stock in, Stock out and Count stock ask one question at a time, with a check before Save (see Set up storage locations and do a stocktake). Checks, records and files in Inventory opens the rest.
A tank. How full it is. A fuel tank leads with Fill a machine, then Delivery, with Dip reading, Add product and Safety sheets under them, and Fuel log for this tank. An IBC or fertiliser bin leads with Record draw, then Delivery. Each asks one question at a time, as in the fuel book (see Keep the fuel book: tanks, fill-ups and dips): scanning the tank's tag skips the question of which tank. Only fuel counts in a fuel tank; anything else recorded there is listed with a note and Move them.
A machine or implement. Its make, model, year, rego, fleet number, serial and engine number, then Meter, Next service, Open work and Problems, with a Service due label when one is due. A tagged-out machine shows a TAGGED OUT box with the reason, who and when, and Clear tag-out for those allowed to clear it. Below that:
Pre-start check (Finish pre-start for one under way). With no checklist yet, people who can edit the farm see Write a pre-start instead.
Log service, Tag out and Plan service.
New checklist and Meter reading need permission to edit the farm. Fuel up needs permission to edit Inventory.
Meter reading opens on the tag: type the hours or odometer, check the change, and save. A reading lower than Phase has, or a big jump, asks Record anyway.
Report, beside Tag out, opens a hazard or incident report with this machine chosen. See Safety and people.
Fluids, pressures & specs, when the machine has any: oils, tyre pressures, grease points, its notes, and a button for each manual filed under its Documents tab, so the crew can check the oil spec at the machine.
Needs attention: pre-start problems with Make a job (or the job already made), and services due with Plan the service or Open job.
Open in Machinery opens the machine.
Someone who can't record work on machines sees "Ask the farm manager for access to record work on machines." instead of the buttons.
A water tank, trough, dam or bore. Record right on the tag page. A tank or dam leads with Record level, then Record a check. A trough or bore leads with Record a check, then Report a fault. Water test, Cleaned and the rest are below. Each asks one question at a time and only what it needs (see Check water tanks, troughs, dams and bores). The link at the bottom opens it in Livestock → Water, or Inventory → Water for water that isn't for stock.
Edit what a tag is on
Tap Edit at the top of a scanned tag. A silo, shed or tank opens its name, type, farm, capacity and notes (a silo or bin also has gas-tight and aeration). A water point opens its own details. A machine opens its form in Machinery.
Silos, sheds and tanks need permission to edit Inventory. Machines and water points need permission to edit the farm. People without it don't see Edit.
Move, take off or retire a tag
Scan the tag, or tap it on the Phase tags page.
Tap ••• at the top, or the tag's own row at the bottom. This tag opens, with Where this tag has been.
Choose one:
Move it to something else, then pick what it is on now, as for a new tag.
Take it off, then confirm. It goes back to your spare tags, ready to reuse.
Retire it, then confirm with Retire tag. Use this when a tag is lost, damaged or no longer sticks.
Nothing recorded against the silo, shed or machine is touched. On a shed or tank in Inventory → Locations, tap the tag under Phase tag for the same choices. Moving, taking off and retiring need permission to edit Inventory.
See all your tags
On a computer or a phone, open More → Daily work → Phase tags. The top line says how many tags are in use, spare and retired. Each tag is a row with its code, grouped by what it is on (Grain & hay storage, Chemical sheds, Tanks & bins, Machines and so on). Its state is In use, Spare, Retired, or Needs a new home for a tag on something since deleted.
Good to know
Records belong to the silo, shed or machine, never to the tag. Loads stay against the silo they were logged on, so a tag can be moved any time without losing anything.
A retired tag stops working until someone scans it and sets it up again.
Needs a new home means the tag is on something deleted from Phase. Scan it and put it on something else.
Phase tags replaced the old storage QR code in Inventory → Locations. Storage QR sheets already printed still open their read-only page.
If something doesn't look right
The link opened in the browser. Tap Open in the Phase app. If that goes to the app store, install or update the Phase app.
A contractor only sees a sign-in page. They aren't signed in, or have no Phase login yet. Invite them to your farm, then they sign in and scan again.
"This tag belongs to another farm". If it is your tag, the person scanning isn't a member of your farm yet: invite them. Otherwise another Phase account set it up, and Phase doesn't say whose. They need to take it off in Phase first.
"This tag is not on anything yet". The tag isn't set up and you don't have permission to edit Inventory. Ask an owner or admin to set it up.
"That is not a Phase tag" or "No tag with that code". Check the code under the QR square. Tag codes never use O, I, L, 0 or 1, and spaces, dashes and capitals don't matter.
Load out or Move grain is greyed out. The silo is empty or sealed for fumigation.
Dip reading (or Record draw on an IBC) is greyed out. Nothing is recorded in the tank yet. Tap Delivery first. Fill a machine works on a fuel tank before its level is in Phase.