Skip to main content

Check spraying, harvest and baling conditions

Use the Conditions outlook to see when wind, delta T, fire danger or humidity are within your limits.

P
Written by Phase Team

The Conditions widget on Overview (it used to be called Spray Conditions) scores the forecast for the job you are about to do: spraying, baling, harvest, seeding or spreading. It tells you whether conditions are Within limits, Watch or Outside limits against limits you set, and when the next good window is. It is guidance worked out from the forecast, not a statement that it is safe to spray.

The Conditions outlook: a week of spraying weather by the hour, coloured by your own limits.

Check conditions on Overview

  1. Open Overview and find the Conditions widget. It is headed with the activity it shows, such as Spraying. The big number is the current reading. Under it, the next 24 hours are drawn against your limits, which show as a shaded band with their numbers down the right-hand edge. A pulsing dot marks the current hour.

  2. Read the verdict: Within limits, Watch or Outside limits, with a line such as "Good until 2 pm" or "Watch until 11 am" and the reason. For spraying and spreading, the wind carries its direction ("7 km/h ↗ SW"). The wide widget also says whether the wind holds steady or swings ("W by 2 pm").

  3. Tap the widget to open the Conditions outlook for every hour of the next 7 days.

The widget shows the activity you last chose in the outlook. To change it, open the outlook and choose another activity at the top. The widget stays on that activity until you choose again.

What each activity looks at

Activity

Charts

What it tells you

Spraying

Wind (gusts dashed), Delta T, Rain (chance shaded)

Wind, delta T, inversion risk and whether rain will wash product off

Baling

Humidity (dew point dashed), Drying power, Rain

Hour-by-hour humidity and dew point, and how a cut swath is curing

Harvest

Grain moisture (once a reading is in), Fire danger, Humidity (dew point dashed), Rain

The grassland fire danger index against your ban figure (35 by default), damp mornings from the dew point, and the grain against your delivery limit

Seeding

Soil moisture (topsoil dashed), Soil temp, Rain

Seedbed moisture and temperature, whether the topsoil is too wet to travel on, and rain coming behind the seeder

Spreading

Wind (gusts dashed), Rain, Humidity

Wind limits for the spread pattern, and whether enough rain arrives to wash urea in

Read the Conditions outlook

  1. Choose the activity in the row at the top. On a phone the row scrolls sideways.

  2. Choose the days. All shows the whole week; each day button opens that day hour by hour. Each day button has a small coloured strip of its own hours, so a good day stands out before you open it.

  3. Choose the measurement under the day buttons, such as Wind or Delta T.

  4. Drag a finger across the chart, or move the mouse over it. The hour, its value, whether it is within your limits, and the gust, dew point or rain chance show above the chart.

  5. Tap or click to keep that hour selected. The panel under the chart explains its verdict and the best window that day. In the week view it offers a link to see that day hour by hour.

On a keyboard, the arrow keys step one hour and Page Up or Page Down one day.

  • The chart fits every forecast hour on the screen, so there is nothing to scroll sideways. Drag across it to read an hour.

  • Your limits are the shaded band, with their numbers down the side. On the harvest Fire danger chart, your ban figure is a red dashed line.

  • Peak: the highest value in view is labelled on the line, and the lowest where there is room.

  • Hour strip: a coloured strip under the chart shows each hour as within limits, watch or outside limits.

  • Wind arrows point downwind, the way the wind is blowing. The readout says where it comes from ("From SW").

  • Rain shows as bars for each hour. In the week view each day's total is written under the day.

  • Next window, beside the chart, gives the next run of hours within all your limits. Show this window jumps the chart to it. Under it are the selected hour's readings for every measurement.

Chart times use the farm's clock. Open map weather closes the outlook and opens the map.

Set your own limits

  1. In the outlook, choose the activity.

  2. Select My limits, the gear at the right of the activity picker.

  3. Change the figures. For spraying these include Minimum wind, Maximum wind, Maximum gust, Minimum delta T, Maximum delta T, Rain limit, Rain chance limit and Inversion sensitivity. For harvest they include Ban indicator, Grass curing, Fuel load, Humidity limit and Dew margin. The whole outlook re-scores as you type.

  4. To go back to Phase's figures, select Reset to defaults.

Each activity keeps its own limits. Spray limits you set before the widget was renamed still apply to Spraying. Your chosen activity and limits are saved on the device you set them on, so set them again on another phone or computer.

Delta T. Phase shows true delta T: the dry-bulb temperature minus the wet-bulb (20 °C at 50% humidity is about 6.2). Before 9 October 2026 it read roughly double, so good mornings were wrongly marked as Watch or outside limits. Expect more hours in range now. Spray records completed before then keep the delta T they were saved with.

Harvest: the ban outlook

With Harvest chosen, the Ban outlook for the next seven days sits under the chart.

  • Each day shows the grassland fire danger index it is expected to reach, with its rating word ("Moderate", "High").

  • A dot and words say where the day sits against your ban figure: "Well below 35", "Below 35", "Close to 35", "At or above 35" or "Well above 35". The days aren't coloured in, so read the words under the number.

  • How likely each day is (Very likely, Likely, Possible or Unlikely) comes from running the index through six forecast models (ECMWF, ECMWF's AI model, GFS, BoM ACCESS, and the Canadian and UK models) and counting how many reach your figure. The day shows a dot for each model, such as "5 of 6 models", the spread between the highest and lowest model, and the hours it gets there.

Change Ban indicator, Grass curing or Fuel load in My limits and the outlook re-scores around them.

This is not a ban notice. Harvest and vehicle movement bans are declared by your local government or bushfire control officer, can be declared partway through a day, and some shires now work from the AFDRS Fire Behaviour Index rather than the grassland index. Always go by the official declaration. When the models agree they can still all be wrong together, because they share observations.

Harvest: when wet grain will be dry enough

After rain, put in your last moisture meter reading and Phase carries it forward hour by hour through the weather since and the forecast ahead. It says when the grain should come down to your delivery limit, such as "Grain models down to 12.5% by Thu 2pm", or that it won't inside the forecast and how low it gets.

  1. Open Overview → Conditions → Harvest. Grain moisture is the first thing in the outlook. Closed, it is one short row: the answer once there is a reading ("14.2% now · 12.5% by Thu 12pm"), or "When will it reach 12.5%?".

  2. Select Add reading (Show once there is one). Hide closes it; open or closed is remembered.

  3. Choose the Crop: Wheat, Barley, Canola, Oats or Lupins. Each has its own limit under Deliver at or below, starting from the CBH receival standards: wheat and barley 12.5%, canola 8%, oats 12% and lupins 14%. Change it if your grade takes more (feed barley and some wheat grades take 13.5%).

  4. Type the Meter reading and when it was Sampled at (Now for straight away).

  5. Under Measured weather, choose your own station, the Nearest public weather station (the closest BoM station reporting now, or a DPIRD station in WA where one is closer, within 100 km), or none. It carries the reading up to now and tunes the forecast to how the station has run against it.

  6. Under Hours ahead, choose Forecast, or Current conditions, held: the last day of weather repeated with no rain, for when you trust the paddock more than the forecast.

A chart shows the modelled moisture against your limit, with any rain due. Air now settles grain at shows the moisture the latest measured air would bring the grain to. Once a reading is in, the harvest hours on the chart and the Overview tile are scored on the grain as well as the air, so a damp-grain hour reads, for example, Grain at 13.4% — still drying. With Current conditions, held chosen, the chart's harvest hours stay scored on the forecast.

It is an estimate carried from your reading, not a measurement: test a sample before the header goes in. Lupins have no openly published moisture curve, so they use field peas', and the panel says the lupin estimate is rougher. A reading stays until you clear it; one older than the weather Phase holds (about a week) is set aside with a message asking for today's sample. The per-crop limits are also in My limits under Grain moisture, such as Wheat delivered at or below.

Baling: cut time and swath curing

  1. With Baling chosen, enter the date and time you cut under When was it cut? It can be up to 7 days back: Phase works out the drying from the weather since then, including any rain that fell on the swath. Clear empties it. Clear it once the paddock is baled.

  2. Read the Swath curing panel: the moisture now, when it reaches your bale-at figure (Ready), the baling windows (night hours included), how much rain lands on the swath and how much moisture it picks back up from overnight dew.

  3. Set the Crop, Swath treatment, Package and moisture figures (Bale at or below, Too dry below) in My limits.

A recorded cut fills it in. When a paddock's mow or cut step is marked done on its Plan tab and the paddock isn't baled or chopped yet, When was it cut? starts from that cut and names the paddock ("From the cut recorded on North 1"). It drops off once the paddock is marked baled or chopped. A time you type wins.

With no cut time, the baling hours on the chart and the Overview widget are coloured on humidity, dew and rain only, so a good day shows green. The Swath curing panel then shows a paddock cut right now ("Cut now and it models down to 16% by Wed 2pm"), which tells you whether it is worth dropping the mower today.

With a cut time, each hour is also scored on how dry the swath should be by then, so the hours stay red or amber while it is still curing, however good the air. A cut time more than 7 days old is not used: a note says so and asks you to clear it or set the new one.

The curing chart fits the screen with a key in words underneath. The moisture figure is an estimate from the weather, not a measurement. It doesn't know your paddock, your swath density or how the crop laid down, so check with a moisture meter before you bale.

Good to know

  • Conditions are guidance only, worked out from forecast data. Never treat them as a statement that it is safe to spray. Always check the product label, permits, local conditions and your adviser's recommendations.

  • The outlook forecasts for the middle of your mapped paddocks. It doesn't need a weather station.

  • Phase Agent reads the same outlook when you ask "when can I spray?", "any chance of a harvest ban Friday?" or "right to bale on the weekend?". It uses the standard limits, not ones you have tuned, and needs the paddock to have a saved location. See Ask Phase Agent about soil, rain, spray windows and labels.

  • Overview → Tools opens this outlook too: Harvest moisture and Spray windows under Already in Phase. For grain left behind the header, use Tools → Harvest loss.

If something doesn't look right

  • "Set a farm location or connect weather to see conditions" on the widget, or "Connect weather or set a farm location to show conditions" in the outlook. The farm has no mapped paddocks for Phase to take the forecast from. Add or import paddock boundaries in More → Paddocks & crops → Farms & Fields (see Draw, import or export paddock boundaries).

  • "No hourly forecast yet." The forecast is still loading. Give it a moment and open the outlook again.

  • The verdict doesn't match what you'd expect. Check My limits for that activity. Limits are saved on each phone or computer, so another device may still have different figures.

  • The widget shows the wrong activity. Open it and choose the activity you want at the top of the outlook.

Related

Did this answer your question?