Skip to main content

Import yield data

Import yields from a spreadsheet, a yield-map file or John Deere, see how a map is cleaned before it is saved, and check how rows match your paddocks.

P
Written by Phase Team

Bring yields into Yield Centre from a spreadsheet, a yield-map file off the header or John Deere Operations Center, or type one in by hand. Use it after harvest or to load past seasons.

Open More → Paddocks & crops → Yield Centre and select Import, at the top of every tab but Loads. On a phone, Import is the upload icon. Actions → Import yield opens the same window from any tab.

Importing loads, not yields? To bring in every delivery from a handler's or buyer's file, with tonnes, grade and quality for each truck, use Import loads. On the Loads tab, Import opens it. On the other tabs it is at the foot of the Import yield window, under Loads, not yields → Deliveries from a handler or buyer. See Loads in Yield Centre.

The Import yield window is grouped by where the yield comes from. On Phase Ultra it starts with From John Deere (Harvest yields and Yield maps), then From a file (Yield map file and Spreadsheet) and By hand (Manual entry). On Phase Pro it starts with From a file, then By hand, and ends with Automatic → From John Deere or CNH, marked Ultra, which opens the Ultra prompt Yield maps that come in on their own.

Before you start

  • You need permission to edit the farm. If you don't see Import, ask the farm's owner or an admin.

  • Your paddocks should already be in Phase, named as in your file.

  • The John Deere imports need Phase Ultra (the free trial has it too) and a connected John Deere account. On Ultra each harvest's yield map comes in from John Deere Operations Center or CNH FieldOps by itself. Every plan can upload a yield map file or a spreadsheet, or add a yield by hand.

Import yields from a spreadsheet

  1. Select Import, then Spreadsheet, and choose your .csv, .xlsx or .xls file.

  2. On Map yield columns, pick your file's column for each item, such as Paddock / field, Harvest year, Crop, Variety and Yield. Choose Not in file for anything missing. Only Yield is required.

  3. Choose the Yield unit: t/ha, kg/ha or bu/ac.

  4. Select Review N rows.

  5. On Yield import preview, check the rows under Matched records. You can change any row's paddock, year, crop, variety or yield.

  6. If a paddock already has a yield for that season, choose Replace, Add additional or Skip on that row.

  7. Select Import N records. Nothing is saved until you do.

Rows Phase couldn't put on a paddock are counted under Unmatched (skipped) and not imported. Fix the names in your file and import again, or add those yields by hand.

Import a yield map file

Getting the file. Get the paddock's yield map as a shapefile: save it from the harvester's display to a USB stick, download it from John Deere Operations Center or CNH FieldOps, or ask your agronomist for it, one paddock per file. A shapefile is a few files with the same name, ending .shp, .shx, .dbf and .prj; put them in one .zip (most downloads come zipped already).

  1. Select Import, then Yield map file. On a farm with no yield maps yet, Yield → Map shows Bring in your yield maps with Upload a yield map; once maps are in, Upload map is the first of the Map's tools.

  2. The window shows the same three steps. Select Choose the file and pick the zip.

  3. On Confirm yield map import, check what Phase read: the file's Zones, the yield Column, and the average and median. Under them, Cleaned first: says how many readings Phase set aside and why (see "How Phase cleans a yield map" below).

  4. Check Paddock yield. Type your real figure if you know it, or select Use map average. A map that logs grain by volume is converted to t/ha using the crop's grain weight.

  5. Choose the paddock in Assign to paddock. It starts on Select a paddock... unless the file is plainly named for one, such as "North_10_Wheat_2025.zip".

  6. Choose the Crop, and the Variety and Season if needed.

  7. If the paddock already has a yield for that season and crop, choose Replace, Add additional or Skip. It starts on Replace for a re-import, and on Skip when the yield was set by hand.

  8. Select Confirm yield map import.

On Phase Ultra you can also upload a yield map in Spatial (see Bring data into Phase Spatial). It lands on the same yield record, so it shows here too, and tonnes already entered are never changed.

Protein. On Phase Ultra, when the combine has a protein sensor and the file has its column (such as "Protein" or "CrdPrPrcnt"), the sheet shows Protein "to Spatial as its own layer". The protein becomes a Protein layer on the paddock in Spatial, such as "Protein · 2026 Wheat", from the readings left after cleaning. Importing the same file again for that season replaces it. It never changes the protein on a yield record.

How Phase cleans a yield map

A yield monitor logs readings that aren't yield, such as the header filling at the start of a run or slowing into a turn, and they paint every headland as a poor strip. Since 29 October 2026, Phase sets these aside before any yield map is saved (from Import → Shapefile, Spatial's Import layers or John Deere), and on each John Deere harvest job's own Yield map, with nothing to switch on:

  • The first and last few metres of each run (about 12 m and 8 m).

  • Readings with the header under half or over one and a half times its usual speed, or cutting under 70% of its usual width.

  • Readings with no grain coming in, more than 20 m outside the paddock, or a moisture misread (nought, or 45% and over).

  • A lone reading unlike everything around it. A real poor patch has poor readings around it, so it stays.

  • Sensor spikes, as before. Two headers that read differently where they cut side by side are brought to their average.

Every threshold comes from that paddock's own readings, so it works for any header width, in km/h or mph. The save message ends, for example, "Cleaned first: 1,240 of 18,900 readings set aside (6.6%)", and the yield record's notes get the breakdown. Cleaning never changes a paddock's yield figure, except a new record with no figure, which takes the cleaned map's average. Maps saved earlier are unchanged until imported again.

Import harvest yields from John Deere

  1. Select Import, then Harvest yields.

  2. Choose From year, To year, From month and To month, and the Farm (All farms or one). A window that crosses New Year is saved to the year it starts in.

  3. Select Pull, and keep the page open. Many farms or years can take a few minutes.

  4. On MyJohnDeere yield preview, open any row marked Match field and pick its paddock under Choose paddock, where the reason it didn't match is shown. This sets the paddock for every row from that John Deere field.

  5. Untick any row you don't want. A harvest with several varieties has an Average row plus a row per variety.

  6. Where a paddock already has a yield for that season, choose Replace, Add additional or Skip on the row.

  7. Select Import N.

This brings in figures, never maps. A paddock harvested in parts comes in as one area-weighted figure. Yield → Records → Manage yield data → Import 6 years opens the same import.

Fetch yield maps from John Deere

  1. Select Import, then Yield maps. (Yield → Map → John Deere maps and Actions → John Deere yield maps open the same window.)

  2. Choose the season under File the maps under, the Farm, and the window in Harvest from and Harvest to (up to four years). A harvest that ran into the new year belongs to the season it was sown in, so move the window, not the season.

  3. Select Find harvests. Each paddock is listed under Ready to fetch, Already have a map, No harvest in this window, Not found in Operations Center or Could not check.

  4. Select Fetch N yield maps.

Most maps arrive within about a quarter of an hour; one John Deere hasn't built yet can take up to an hour. You can close the window: maps appear in Yield → Map on their own, and ones still being built are listed under On the way from John Deere. Each square is a little wider than the header that cut it, such as about 15 m behind a 12 m front. A paddock that already has a map is left alone. To fetch it again, first delete its map layer in Spatial (confirm Delete map; the yield figures stay).

Add one yield by hand

  1. Select Import, then Manual entry (or Yield → Records → Add record). Manual yield opens.

  2. Choose the Paddock, Harvest year and Crop.

  3. Type the Yield in t/ha, kg/ha or bu/ac, and anything else you have.

  4. Leave Area harvested blank for the whole paddock. If only part was harvested, say half for hay and half for grain, type those hectares, and record the other harvest as its own yield.

  5. Select Save yield record.

Yield Centre doesn't take bales per hectare. Record hay bales as a load (Record load → Off a paddock, What → Hay, From → Baled on farm). A harvest pass on a paddock's Plan tab can carry its yield in bales/ha.

How Phase matches rows to paddocks

  • A John Deere field already linked to a paddock goes to that paddock.

  • Otherwise Phase looks for the name as written, ignoring capitals, spaces and dashes, so "NORTH-1" is North 1, even on a farm called North Farm.

  • It never matches a different number or letter: "North 1" is not North 10, North 2 or North B.

  • When two paddocks fit equally well (two farms that each have a North 1, or a row saying only "North"), the row is left as Multiple similar paddocks. A row naming only a farm is left as Farm name, not a paddock.

  • A row like "North Farm North 1" is marked Paddock name found in a longer name. Check it before importing.

Good to know

  • Figures and maps are separate imports, run in either order. Replace saves the new figures and keeps the paddock's map. If the map came first, Phase suggests Replace ("Replace adds these figures to it and keeps the map").

  • A yield you set by hand starts on Skip, with a note such as "You set this yield by hand: 5.5 t/ha. Skip keeps it. Replace takes this import's 5.93 t/ha."

  • Every paddock harvested that season is checked, even one the season's paddock list leaves out, so fetching a past season again may find paddocks it skipped before.

  • A map is filed only on a paddock it sits on. A paddock linked to an Operations Center field never gets another field's map by name.

  • A map for a paddock with no yield brings John Deere's figure with it. A yield you entered is never changed.

  • John Deere harvests are saved under the crop's own name, so WHEAT_WHITE comes in as Wheat. To tidy names saved before 7 October 2026, see Correct yields and combine crops.

  • John Deere and CNH FieldOps harvest jobs waiting in Data Feeds already show in Yield Centre, marked not reconciled. Confirming one saves the paddock's yield and adds its map. See John Deere harvest jobs, diesel and job maps.

If something doesn't look right

  • "… is only one part of a shapefile". Zip the .shp, .shx, .dbf and .prj together and choose the zip.

  • The map has fewer readings than the file. Phase cleaned it before saving. Cleaned first: on the import sheet, and the yield record's notes, say how many readings were set aside and why.

  • "Not found in Operations Center". Give the paddock the same name as in Operations Center, or import its boundary from John Deere, then Find harvests again.

  • "Did not finish". Read the reason beside it. Often the map didn't sit on that paddock: John Deere's paddock of that name is somewhere else. A map of only a few hundred readings (the header crossing the paddock for a few seconds), or one over 20 t/ha for a grain crop, isn't saved, and the reason says so. "That harvest has no yield readings in it" usually means the paddock was cut for hay, or the yield monitor wasn't running.

  • Two yields for one paddock, or a yield on the wrong paddock. Delete the extra or wrong one in Yield → Records and add it to the right paddock (see Correct yields and combine crops).

  • "MyJohnDeere isn't connected yet". Connect at More → Integrations → John Deere Operations Center. See John Deere Operations Center.

Related

Did this answer your question?