Set or fix a paddock's yield, tonnes or area, give harvests a $/t, spread a farm or crop total you know over its paddocks, fill in a season that has no yields yet, remove a record that shouldn't be there, and join up crops or varieties that came in under two names. All of this happens in the Yield Centre's Records.
Open More → Paddocks & crops → Yield Centre → Yield, then choose Records beside List and Map. It is the same on a computer and a phone, and Actions → Yield records opens it too. Records was under Actions until 7 November 2026, and was the Data tab before that.
Before you start
Editing yields, adding or deleting records, and combining names all need permission to edit the farm. Setting a $/t, and seeing the $/t and Value columns, also needs access to the farm's finances. Without permission you can see and export the records, but those buttons are hidden or greyed out. Ask the farm's owner or an admin.
See and export the production records
Production records is a table with one row a harvest: Paddock, Season, Farm, Crop, Variety, Yield t/ha, Tonnes, Area ha, $/t and Value (with finance access), and Source. It covers the harvests the Filters at the top of the page allow.
Sort or filter any column from the menu on its heading.
Group records by Farm, Crop, Season or Source gives each group a subtotal. No groups turns it off.
Columns adds hidden ones, such as Protein %, Moisture %, Screenings %, Grade, Area from and Price from.
Tick rows to read their sum, then use the bar that appears: Open, Source records CSV (every source record behind them) or PDF.
Export on the table's toolbar saves what is in view as CSV or Excel.
Double-click a row to open that harvest (on a phone, tap it, then tap it again). Charts / history shows its figures and the paddock's crop history, and Raw data shows every original record behind it.
Manage yield data, under the table, shows how many records you have each year and lists the John Deere records, where you can remove one. Only people who can edit the farm see it.
Change yields, tonnes, areas or prices in the table
In Records, select Edit. The Yield t/ha, Tonnes, Area ha and $/t columns open for typing.
Type into any one of yield, tonnes or area. The others follow from the area.
To spread a total you know, such as a crop's tonnes off the weighbridge dockets, tick its rows, select Set total tonnes, type the total and select Spread it. It is shared in proportion to each row's tonnes now (by area where none has tonnes), and each t/ha follows from its area.
To give harvests one price, tick them, select Set $/t, type the price and select Set price.
Select Save all (it shows how many changes, such as Save all 6). Discard drops them.
Nothing is saved until Save all. The Overview, the List and the grain line follow what you saved.
A harvest made from several source records keeps its figures here: open it and change its records one at a time. It can still take a price.
The $/t is that harvest's own price, the same one Grain & hay prices sets, so Value and the Overview's Grain value follow it. Contracts still price their tonnes first (see Yield forecast, water use efficiency and grain prices).
Fill in a year
Fill in a year, beside Edit, is the year-by-year editor. Use it for a season where some paddocks have no yield yet: every paddock is listed, blank ones included.
In Records, select Fill in a year. It opens on the latest year that has yields.
Use the arrows to step to another year. You can go back to any year up to this one, including a year with no yields.
Type the yield in t/ha or in total tonnes. Phase works out the other from the paddock's area.
Check the Crop and Variety on the row, and fill them in on a blank row.
Select Save on that row (it sits right after Tonnes), or press Enter. A row you have typed in is shaded and its Save turns solid.
When you have finished, select Done editing.
While anything is unsaved, a line says how many changes are waiting, with Discard and Save all N (Save change when there is one). If you select Done editing with changes waiting, Phase asks: choose Save and finish or Keep editing.
A row with no crop or no yield can't be saved. It stays open and the message names the paddock.
A paddock with two or more records for that season can't be changed here: Phase says how many records it has. Open the harvest, select Raw data, and delete the record that shouldn't be there (see below), then edit the one that's left.
Add one harvest by hand
In Records, select Add record.
Choose the Paddock, Harvest year and Crop, and type the Yield in t/ha, kg/ha or bu/ac.
Leave Area harvested blank for the whole paddock, or type the hectares if only part was harvested (half for hay and half for grain, say: record each harvest over its own hectares).
Add Variety, Grade, Moisture % and Protein % if you have them.
Select Save yield record.
Remove a yield record
In Records, double-click the harvest's row.
Select Raw data.
Under the record you want gone, select Delete this source record.
Confirm. Phase says, for example, "Delete Wheat yield for 2025? This removes this source record and its map readings."
There is no undo, and the record's yield map goes with it. To remove only a map and keep the figures, delete the paddock's yield-map layer in Phase Spatial (Phase Ultra) and confirm Delete map. To delete a John Deere record, you can also open Manage yield data, select Manage records beside John Deere records, and remove the row.
A yield on the wrong paddock can't be moved. Delete it, then add the yield to the right paddock with Fill in a year or Add record.
How Phase keeps one yield figure per paddock
A paddock's yield for a season is one figure. Averages, the paddock list, gross margins and the yield map's legend all read it.
A yield you change is yours. Its Source says so, for example Header · John Deere Operations Center · changed by hand. The next John Deere or spreadsheet import sets that row to Skip, so your figure stays unless you choose otherwise. Yields corrected before October 2026 aren't marked this way: change the yield again, or choose Skip on the import.
The yield map follows the figure. Change a paddock from 5.93 to 5.50 t/ha and every reading on its map moves by the same amount. The map still averages what the paddock yielded, and the pattern across it stays the same. This happens whether the yield is edited in Records, replaced by an import, or recorded from harvest loads with Record as yield or Use as yield.
A map that never matched is left alone, for example your own calibrated map kept beside a different recorded yield, until you press Match the map under it (see View and use yield maps). Once matched, it follows the yield.
Importing figures keeps the map. Replace on an import saves the new figures and keeps the paddock's map. A map cleared by an earlier re-import doesn't come back: fetch it again with Yield → Map → John Deere maps.
Delivered tonnes stay separate. Loads from CBH LoadNet never change a paddock's yield.
Combine crops and varieties
John Deere sends its own crop codes, so a harvest can arrive as WHEAT_WHITE beside your own Wheat. One variety can also come in several spellings, such as Scepter, SCepter and SCEPTER. Two names count as two in charts, averages and filters. Capitals alone never split a crop: BARLEY and Barley are already one.
Select Actions → Combine crops & varieties.
Choose Crops or Varieties. Crops lists every crop name on your yield records, with how many records and which seasons. Varieties asks you to pick a crop, then lists its varieties, with every spelling of one variety shown together and placeholders such as "---" shown as No variety.
Tick the names that mean the same crop or variety. Tick one name on its own to rename it.
Keep the suggested name or type another.
Select Combine into … (or Rename to …).
Suggested at the top lists the safe ones first, each with its own button, plus Tidy all: crop codes Phase recognises (WHEAT_WHITE becomes Wheat), other spellings of one variety, and placeholders cleared to no variety. Two different names, such as Havoc KW and Havoc, are never suggested. Combine them yourself if they are the same variety.
Undo puts the old names back while the window is still open. Only yield records change. Crop plans, harvest loads and contracts keep their names.
When a code splits a crop, people who can edit the farm see a note on Overview and in Records in Yield Centre, with Combine crops and Not now. Not now hides it for that farm on this device only, until a new code turns up.
Since 7 October 2026, a John Deere harvest is saved under the crop's own name and a placeholder variety is saved as no variety. Records saved before then keep their names until you combine them. A later re-import finds the renamed record instead of adding a second one.
If yield looks wrong
Check these, in order:
The harvest date and season.
The crop, and whether it arrived under two names (Actions → Combine crops & varieties).
The variety.
Which paddock it matched to.
The unit (t/ha, kg/ha or bu/ac).
The paddock's area.
Where it came from: the Source column, such as Typed in Phase, Spreadsheet import, a yield map or the header, and whether it says "changed by hand". Tap the chip for what it means.
For water use efficiency, the farm's rain source under Rainfall for production (see Yield forecast, water use efficiency and grain prices).
On Yield → Map, the harvest chosen at the top of the page and the crop chosen above the map, and Settings → Paddocks (see View and use yield maps).
Whether only part of the paddock was harvested. Loads recorded as yield over the whole paddock read low; put the hectares right with Update yield (see Loads in Yield Centre).