Skip to main content

Yield forecast, water use efficiency and grain prices

Read the season's yield forecast, rainfall and water use efficiency, and set the grain prices Phase uses.

P
Written by Phase Team

Read what this season could yield from the rain so far, see how well each harvest turned rain into grain (water use efficiency, or WUE), choose which rain Phase uses for both, and put a $/t price on any harvest, grain or hay, old seasons included.

Do I need a contract to price my grain? No. Grain & hay prices in Yield Centre puts a $/t on any harvest by hand, even an old season with no contract and no crop plan.

How do I put a $/t on hay I sold? Open Grain & hay prices, choose the hay crop (such as Oaten hay), tick its season or paddocks, type the $/t and select Set price. A sale contract on the Contracts tab prices it too. Hay you sold is income, so don't add it as a cost on a job.

Where do I type rainfall for WUE? You don't. Phase uses each farm's SILO grid automatically. To use your own station or gauge instead, choose it under Rainfall for production (see below). Daily gauge readings go in More → Paddocks & crops → Weather & Climate.

Where to find it

  • The forecast and rainfall: More → Paddocks & crops → Yield Centre → Forecasts. It was Forecast & rainfall at the bottom of the Overview until 7 November 2026.

  • WUE: Yield Centre → Yield → Records → Fill in a year, in the GSR, Rain source and WUE kg/ha/mm columns.

  • Grain & hay prices: Yield Centre → Actions → Grain & hay prices, or Grain & hay prices beside the harvest's figures on the Overview. Set $/t on Yield → Records prices ticked harvests too.

The paths are the same on a computer and a phone.

Read the yield forecast

Yield forecast starts with this season's rain over the farm's growing-season months. That's April to October unless the farm has chosen its own months (see Rainfall records and growing-season rainfall).

  • A bar shows what has Fallen so far since the 1st of the first month (1 April on April to October), what is Still to come, and a Typical season mark for that farm, with the season total the forecast uses.

  • Under The rest of the season, choose how the rest goes:

    • Typical: the middle of your recorded years, from today to the end of the season (31 October on April to October).

    • Dry or Wet: the driest or wettest fifth of those years.

    • My own: type a total for the growing season.

  • Once the season's last month is over, the forecast uses the finished season and the choice goes away.

Every crop forecasts each crop from its own harvests, all on one t/ha scale. Each row shows:

  • the expected yield and the low to high range

  • the tonnes that makes on the planned hectares, where the crop is planned this season (for example "≈ 2,987 t" on 973 ha)

  • every past harvest as a tick, your average as a dashed line, and how many harvests it learnt from.

A crop without three harvests that each had a full growing season of rain uses its crop plan's yields and says so, or says how many more harvests it needs.

Select a crop to see how rain has turned into its yield: each harvest against its season's rain, with a line in plain words such as "Wheat has made 10.4 kg/ha for every mm…".

Farm and Learn from (Every season, Last 10 seasons or Last 5 seasons) sit beside the heading. Farms on different rainfall grids are forecast one at a time, starting on the farm with the most history.

How the forecast is worked out

It is one rainfall-use-efficiency model. For each crop, Phase takes the kg/ha it made for every mm of growing-season rain on your own harvests. The median gives the expected yield, and the 25th and 75th percentiles give the low and high. Each is multiplied by this season's rain. A year that is not a finished growing season is never used as history.

Choose which rain Phase uses

Beside the forecast, Rainfall for production lists each farm and its rain source. Phase uses each farm's SILO grid until you choose otherwise.

  1. Add your station or gauge first, under More → Integrations → Weather stations & sensors (see Connect a weather station or rain gauge).

  2. In Yield Centre → Forecasts → Rainfall for production, choose the station in that farm's list. The list offers SILO farm grid and your own stations, such as a Davis WeatherLink or Weather Underground station or a manual rain gauge. DPIRD stations aren't offered.

Choose a station only when it has a complete history for the growing-season months. The same rain drives WUE and the forecast. Changing it doesn't change any yield record, or the station's own rainfall history.

Changing a farm's rain source needs permission to edit the farm. Anyone else sees "Ask an owner or manager to change a farm's rainfall source." Paddocks not in a farm use their own SILO grid and never take another farm's station.

Water use efficiency (WUE)

WUE kg/ha/mm is a harvest's yield for every mm of growing-season rain on that farm. You see it in Yield Centre → Yield → Records → Fill in a year, with GSR (growing-season rainfall) and Rain source beside it, and Export CSV there includes all three. Fill in a year needs permission to edit the farm. Anyone can see each crop's typical kg/ha per mm by selecting the crop in the forecast.

Changing the farm's growing-season months changes WUE and the forecast straight away, for past seasons too. The yield records themselves don't change.

Put a price on grain or hay

A sale contract on Yield Centre's Contracts tab isn't the only way to say what grain or hay sold for. Grain & hay prices puts a $/t on any harvest.

  1. Open Grain & hay prices.

  2. Choose a crop, such as Wheat or Oaten hay. Its seasons are listed newest first, each with its tonnes, how it's priced now, its value and its average $/t (or Not priced). Open a season to see its paddocks.

  3. Tick one season, several, Every season, Only the unpriced, or single paddocks.

  4. Type a price in $/t, or tap a suggestion: that season's contract price, the crop plan's price, or the price you gave the crop in your latest other season.

  5. Select Set price, or press Enter.

That covers both "the same average price for everything" and "these paddocks got more". Clear takes your price off the ticked harvests. Undo puts back what was there while the window is open. The $/t column on Yield → Records is the same price, and can be typed there too (see Correct yields and combine crops).

A price below $50/t or above $3,000/t is flagged ("Check it is dollars a tonne") but still saves. Type what you were paid, before or after freight and fees, the same way each season.

Hay

Hay is priced by the tonne, the same as grain. A hay harvest needs tonnes to be priced: record its loads with their tonnes (Yield Centre → Record load), or its yield in t/ha. A yield recorded only in bales shows "No tonnes" and can't be priced.

A sale contract prices hay when its Commodity is the crop the harvest was recorded as, such as Oaten hay for oaten hay. A contract written as just Hay prices that season's hay when you cut one kind of hay. If you cut two kinds, Phase can't tell which one it sold, so it prices neither: open the contract, select Edit and choose the hay it sold. A hay contract never prices grain.

How a harvest is priced

Each harvest's tonnes are priced in this order:

  1. Its contracts: delivered, then still to deliver, spread over all of that crop's tonnes that season.

  2. Your Grain & hay prices figure, for the rest.

  3. The crop plan's $/t, if you haven't set one.

Tonnes nothing prices count as not priced, never as $0. Financial Performance prices grain the same way (see Gross margin: what it covers and how grain is priced). Setting prices never changes your yield records.

A contract that isn't pricing any harvest

When a contract with a price matches none of a season's harvests, and that season still has tonnes not priced, Yield Centre's Overview says so under the season's cards, for example "Hillside Fodder · Hay isn't pricing any 2026 harvest", with See why. Grain & hay prices lists each such contract at the top with the reason, such as "No 2026 harvest is recorded as Lucerne hay", and the crops that season did harvest. Select Open contract, then Edit, and change Commodity to the crop it sold.

Who can see and set prices

Prices are financial information. Only people who can see the farm's finances see Grain & hay prices, the Grain value card (Grain & hay value on a season with hay), the Value view of the crop chart, or the prices. Only those who can also edit the farm can set or clear them. Anyone else reads "You can see prices. Someone who can edit the farm sets them."

If something doesn't look right

  • WUE looks wrong for a paddock. Check its GSR and Rain source in Fill in a year first, then the station's or gauge's own history.

  • A station shows "Station missing" or "Unavailable station · using SILO". Phase can't find that station, so the farm's SILO grid is used. Check the station under Sensors, or choose another.

  • A crop says it needs more harvests. It has fewer than three harvests with a full season of rain. Import older yields (see Import yield data).

  • You can't see Grain & hay prices. Your access doesn't include finances. Ask the farm's owner or an admin.

  • Hay you sold still says not priced. Check the contract's Commodity is the hay crop the harvest was recorded as (see Hay above), or set its $/t in Grain & hay prices.

  • A harvest says "No tonnes". Its yield has no area or unit to turn into tonnes. Check it in Yield → Records, where you can type its tonnes or area.

Related

Did this answer your question?