See your harvests' yield maps for the whole farm or one paddock, change how they're coloured, read them reading by reading or against the lie of the land in 3D, and take a map into Phase Spatial.
To bring up a yield map: open More → Paddocks & crops → Yield Centre → Yield and choose Map for the whole farm. (It was Paddocks → Yield maps until 7 November 2026, and the Maps tab before 29 October; old links still open it.) For one paddock, open Map, select the paddock, open its Yield tab and select Yield map. A paddock only has a map once one has been imported (see Import yield data).
Before you start
Maps come from a yield-map shapefile (every plan), or on Phase Ultra and the free trial from John Deere Operations Center or a CNH FieldOps harvest confirmed in Reconcile.
A map needs a connection to open. With no signal, the yields, averages and which paddocks have a map are still there.
Phase Spatial needs Phase Ultra.
Open the farm's yield maps
Open More → Paddocks & crops → Yield Centre, select the Yield tab, then Map beside List and Records. It shows the harvest chosen at the top of the Yield Centre.
To see another harvest, change it at the top of the page with the arrows or the list between them. Every tab follows it.
Choose All crops or one crop in the crop list above the map. It only shows crops harvested in that harvest, and changing the harvest goes back to All crops.
Select a paddock on the map to make it the active one.
Beside the crop list are Upload map, Open in Spatial (Phase Ultra), John Deere maps (Automatic maps on Phase Pro, which opens the Ultra prompt) and Settings, shown as icons on a phone. With no maps yet, the map shows Bring in your yield maps: Upload a yield map, From John Deere on Ultra, and Getting the file in three steps (see Import yield data). On Phase Pro, Or have them come in on their own says what Ultra adds: each harvest's yield map from John Deere Operations Center or CNH FieldOps by itself, a diesel map of every job and VRT zones in Spatial.
A map takes a moment to load the first time, then reopens quickly for a while.
Open one paddock's yield map
From the map: Map → the paddock → Yield → Yield map.
From Yield Centre: on Yield → List, select a paddock's harvest, then View yield map. On Yield → Records, double-click a harvest's row, then View yield map. The button reads "No map for <season>" when that harvest has none.
Change how the map is shown
Select Settings above the map.
Choose Smoothing: Off, Light · 10 m, Medium · 20 m or Strong · 40 m.
Under Range, type a Min and Max to fix the colour scale, or select Auto to let it follow the maps.
Choose a Colour scale.
Choose the Map unit (only shown when the season has maps in more than one unit).
Drag Opacity.
Tap outside the panel to close it.
Smoothing, range and colour scale apply to 3D too.
Choose which paddocks show. In Settings, select Paddocks at the bottom. Pick the active paddock for Spatial, a farm, or tick the paddocks to show, then select Show selected paddocks.
Read the colours
On Auto, the colours cover the main body of the readings, not the stray ones, such as a header running empty over a headland or a blockage clearing. Readings beyond the scale are still drawn, in the lowest or highest colour, and the legend says Auto scale, ignoring spikes, with < on the low end and + on the high end. Nothing is deleted, and low patches stay on the map.
The legend says Shared auto scale when nothing is outside the scale, and Fixed scale when you have typed a range.
When a paddock has more than one map that season, the newest is shown. Choose a crop to compare a particular harvest.
Match a map to the paddock's yield
A yield monitor nobody calibrated against the weighbridge can read high or low all season. The map's pattern is right, but its level isn't, so zones, rates and profit maps built on it carry the error. When a map sits more than about 1.5% off its paddock's yield, Phase says so under the map for the active paddock, for example "North 1's map averages 4.62 t/ha, 7% above its yield of 4.30 t/ha".
Select the paddock on the map to make it the active one.
Read the line under the map. It says if the yield was set by hand, and when loads were logged off that paddock for that crop it shows their tonnes as a check. Loads never set the yield.
Select Match the map. Every reading moves by the same share, so the pattern stays the same and the map's average becomes the paddock's yield.
The message that follows has Undo, and the yield record's notes get one line saying what the map averaged before. The paddock's yield is never the one that changes. Once matched, the map follows the yield: change the yield later and the map moves with it. A map uploaded in Spatial that doesn't match offers Match the map in its saved message too.
Nothing changes unless someone presses the button. A map already at its paddock's yield shows nothing, and so does a record not in t/ha (a bu/ac map is kept as it was logged). Only people who can edit yields see Match the map.
Explore a paddock reading by reading
The Map / Explore / 3D switch sits in the map's top-left corner.
Select Explore. Each paddock is redrawn as thousands of small dots in the same colours and scale.
Drag a finger, or move the mouse, across a paddock. The dots part around it, and the yield under it, such as "3.42 t/ha · North 2", follows right above it.
On a phone the map is locked while Explore is on, so zoom in on the paddock in Map first, then switch. Making a paddock the active one only works in Map.
See yield against the lie of the land (3D)
3D shows one paddock's real ground, rises and low spots and all, with its yield map laid over it. A wet hollow or a poor ridge can be read straight against what it yielded.
Move around. Drag to turn and tilt, scroll or pinch to zoom, and click or tap the ground to fly to it. Reset view comes back.
The card in the corner picks the paddock, switches Perspective and Top view (computer and tablet), sets True scale or Height ×N (the rise and fall stretched N times so it can be seen), and colours the ground by Yield or Height. It gives the lowest and highest point, the fall between them and the average yield.
On a phone the card is folded behind 3D settings at the top right. Tap it to open and again to close. The elevation credit sits behind Credits.
Yield by height splits the paddock into five bands of equal area, from Highest fifth to Lowest fifth, each with its average yield against the paddock. One sentence says whether low ground yielded less, high ground yielded less, or there's no clear link. Tap a band to pick that ground out, and again to show it all.
Point at or tap the ground for its yield, how it compares with the average, its height and how far it sits above the paddock's lowest point.
The first time anyone on the farm opens 3D, Phase fetches the ground under every paddock at once (30 m elevation data) and saves it as each paddock's Elevation layer in Spatial. After that every paddock opens straight away for everyone; a paddock added later is fetched when first opened. A paddock with its own elevation layer in Spatial (a survey, RTK, or heights your John Deere machines logged) uses that instead.
Fetching the ground needs permission to edit the farm; anyone else sees "<paddock> has no elevation yet". Phase has a daily allowance for these fetches. Past it, a paddock not yet fetched says No more elevation today and loads the next day.
Nothing in 3D changes your yield records. The only thing saved is each paddock's elevation layer.
Use a yield map in Phase Spatial
On Phase Ultra, Spatial uses saved yield maps as layers for zone maps and prescriptions.
On Yield → Map, select the paddock so it is the active one.
Select Open in Spatial. The paddock and harvest go across with it.
Or open More → Paddocks & crops → Spatial, choose the paddock and switch on its yield layer. Spatial can also fetch a John Deere yield map through Actions → Import layers → John Deere; a long build carries on and appears later.
Yield and NDVI together. Yield Centre's Map shows yield only. To lay a yield map beside crop vigour (NDVI), use Spatial: bring the satellite dates in with Import layers → Satellite, switch the layers on, and use Read to see every layer's value at the spot you tap, or build zones from them together. See Bring data into Phase Spatial.
How John Deere maps are turned into t/ha
John Deere's map file records yield as a grain volume, and Phase converts it to tonnes per hectare:
If the paddock already has a yield for that season, the map is scaled so its average matches that yield.
Otherwise Phase uses John Deere's own harvest summary for the job, or the crop's standard grain weight.
Maps imported before 2 October 2026 were corrected then, and seasons Phase had created from a John Deere map now show a lower yield. If you know the real tonnes for one of those seasons, type them in Yield → Records → Edit. The map moves with the figure. Since 29 October 2026 every yield map is also cleaned before it is saved, setting aside readings that aren't yield, such as the start and end of each run (see Import yield data). A map imported earlier keeps its readings until it is fetched again.
If something doesn't look right
No maps showing. Check the harvest at the top of the page and the crop above the map, then Settings → Paddocks. A paddock may be unticked.
The colours look washed out by one bad patch. Leave Range on Auto, or type your own Min and Max.
"Unable to draw" a paddock. Check its boundary and that the map has readings.
3D says "Elevation is not set up yet". Map and Explore still work. Contact support if it stays.
A map reads too high or too low against the paddock's yield. Select Match the map under the map (see above). If it is the yield that is wrong, correct it in Yield → Records; the map follows the figure.
I can't find the Maps tab, or Paddocks → Yield maps. The farm's yield maps are Yield → Map since 7 November 2026.