Bring soil test results into Phase from the lab's PDF, a photo of the results page, or a spreadsheet the lab exported. Phase matches every sample to a paddock and shows you everything to check before anything is saved.
Where to import soil tests
On a computer or a phone, open More → Paddocks & crops → Soil Centre, then select Add results at the top (on any view but Map). This opens Soil test import. It was under Actions → Import until 7 November 2026. From a paddock's Soil tab, Add → Bulk add spreadsheet opens the same page.
Choose Lab results for the numbers from your lab (PDF, photo, XLSX, XLS or CSV). Zone boundaries is for the zone map your results were sampled from: see Use soil data on the paddock, in Compare and in Spatial.
Before you start
Boundaries. Phase matches samples to paddocks by GPS first, so draw or import paddock boundaries before you import. Paddocks with boundaries shows how many have one.
Bag codes. Results from a sampling job planned in Soil Centre match by the bag code instead, when the lab puts the code (such as 7K3Q-N1S1-A) in its sample or lab number column. Each result lands on the exact site and depth the bag came from, its match says which bag and job, and the job moves to Results in once imported (see Soil test import and soil data).
Trial. While your farm is on trial, Phase AI reads up to 10 soil reports. A subscription has no limit.
Lab results only. The report reader can't turn a PDF of zone maps or variable-rate (VR) maps into soil samples. Ask your agronomist for the shapefile or Rx files and upload them in Spatial (see Bring data into Phase Spatial).
Read a lab report PDF or photo
Open Soil test import with Lab results selected.
Select Read a lab report (PDF or photo).
Choose the PDF, or a photo (JPG, PNG, WEBP or HEIC). A long report takes a minute or two to read.
Check the samples in Soil import preview (see below).
Select the import button. Nothing is saved until you do.
Phase AI reads reports from Nutrien, CSBP, Elders, Nutrient Advantage, APAL and most Australian labs, one sample per depth column. It takes the paddock, site, depth, date, coordinates where printed, pH (CaCl₂ and water), EC, organic carbon, nitrate and ammonium N, Colwell P and K, PBI, sulfur, CEC and aluminium. Anything else the lab printed goes in the sample's notes.
The preview says how clearly it read the report ("read clearly", "read, check it" or "hard to read, check every value") and lists anything doubtful, such as a blurred number, under Check these before importing. The report is filed in Documents as a soil test.
Printed coordinates place each site in its paddock. Without them, sites match by paddock name and need a location before Spatial can map them.
Import a spreadsheet
Open Soil test import with Lab results selected.
Select Choose soil spreadsheet.
Pick the XLSX, XLS or CSV file.
On Map soil test columns, check what each column holds. Pick one for any column Phase didn't recognise, or choose Do not import this field.
Select Import review.
Check the samples in Soil import preview (see below).
Select the import button.
Import review needs a paddock column (Paddock / field) or both Latitude and Longitude, plus at least one result such as pH, Total N, P, K, S, EC, CEC, OC or PBI.
Without latitude and longitude, the results still import by paddock name, but each site needs a location before it can build a zone map or prescription. Link them to the zones they were sampled from afterwards (see Use soil data on the paddock, in Compare and in Spatial).
With separate Depth from and Depth to columns, Phase builds the depth label for you, such as 0-10 cm. With one depth column, map it to Depth label / range. Edit columns in the preview takes you back to the mapping.
Check and correct the samples
Soil import preview counts samples that are Ready, Duplicates and Unmatched, shows the sites on a map, and lists each paddock under Matched paddocks. Before you import says what will happen, including saved samples that will be corrected.
The grid is headed What will import for a spreadsheet and What Phase read for a report. A blank cell means the file didn't give that reading.
Correct a cell: click it and type, paste a column, or drag a corner to fill down. Undo, sort, filter and search work as in a spreadsheet.
Status says what each sample will do: Ready, Duplicate, Duplicate, adds lab #, Updates a saved sample, or Unmatched, file says with the name the file used. A depth or date Phase couldn't read is noted after it.
Give an unmatched sample its paddock in its Paddock cell, typing to narrow the list. An unmatched sample is skipped unless you do. The counts and map update straight away. Only an exact name is taken, so "North 1" never lands on North 10. Two paddocks with one name show their farm in brackets.
Leave a sample out: tick its row and choose Delete. Nothing already saved is touched. Undo, or Put it back, returns it.
Dates show as 14 Apr 2026; type them day first (14/04/2026).
On a phone, tap a cell, then tap again to type. A second tap opens the paddock list or the calendar.
The Paddock column stays put as you scroll, and each heading shows its unit. Readings show rounded, but Phase saves exactly what the file said or what you typed. The import button says what it will do, such as Import 3, Update 2 or Import 3 + update 2. Nothing is saved until you select it. Imported results then show on the paddock's Soil tab and in Soil Centre.
Import a corrected lab report
Import the re-issued report as usual. A row whose lab number, paddock, site, date and depth match a saved sample, with a changed reading, shows Updates a saved sample. New samples are added first, then saved ones are corrected.
The same report imported twice is skipped as Duplicate.
Duplicate, adds lab # gives a saved sample the lab number it was missing.
If the lab number is already on a different sample (a different depth, say), the row is skipped and Matched paddocks says "Lab # … is already saved for a different paddock, site, date or depth". Neither sample changes.
A corrected report imported before 17 October 2026 changed nothing, though it looked like it worked. Import it again.
What Phase checks as it reads
A row Phase couldn't take as given is flagged in Status so you can fix it.
Units. Exact conversions are made: EC in mS/m or µS/cm to dS/m, total N in % to mg/kg, organic carbon in g/kg to %. On a lab report, a result Phase can't convert, such as aluminium saturation in %, goes into the notes as printed. In a spreadsheet, a column in a unit Phase can't convert doesn't import, and Map soil test columns says so. Older results in a unit Phase can't compare read "not comparable", aren't charted, and have their own column in the export.
Methods. Olsen or Mehlich P never goes into Colwell P, exchangeable K never into Colwell K, and ECe never into EC (1:5); they go in the notes. With both Olsen and Colwell printed, Phase keeps Colwell. A pH that doesn't say CaCl₂ or water is flagged rather than saved as both.
Total N is nitrate plus ammonium N when both are given, and blank with nitrate only.
Depths. A missing depth is flagged and left blank, never filled in as 0-10 cm. A "10-20" that Excel turned into "Oct-20" is caught. Depths in mm become cm, and "10cm" reads as 0-10 cm.
Dates. 12.02.2025 reads as 12 February. A future date is flagged. A spreadsheet row with no date gets today's date and is flagged.
Below detection. "<0.5" is saved as 0.5, with a note saying so.
Repeated tables. A summary table after the results is read once. If its date disagrees, the row is flagged.
No site column. Cores sharing a paddock, date and depth import as separate sites ("Long Paddock 1", "Long Paddock 2").
Remove samples or a sampling site
Soil Centre deletes results, not sites. Deleting there needs permission to edit the farm.
Open More → Paddocks & crops → Soil Centre, then the Results view (it was Data).
Tick the results.
Open the Actions menu above the list and select Delete, then confirm. The results go and their sampling sites stay. This can't be undone.
You can also open one result and select Delete result.
To remove a sampling site as well:
Open Soil test import and scroll to Manage samples.
Tick every sample from that site.
Select Delete (it shows the count, such as Delete 4), then confirm. The site goes with its last sample. This can't be undone.
Deleting a sampling job made with Plan sampling doesn't remove sites made by imported results.
If something doesn't look right
"That does not look like a soil test report". It's probably a PDF of zone or VR maps. Ask for the shapefile or Rx files and upload them in Spatial with Import layers → Upload.
"Phase read the report but found no results columns with values in it". Try the lab's original PDF, or a straighter, better-lit photo.
The import button is greyed out. No sample is ready. Choose a paddock for each unmatched sample, or use a file with new lab numbers.
Samples aren't on the paddock. Check each was matched to the right paddock, not left Unmatched or deleted, that latitude and longitude were mapped correctly and the boundary is right. In Soil Centre, check the chips along the top (year, depth, lab) aren't hiding it: Reset clears them.
Readings seem missing. Open the sample's full detail in Soil Centre, which shows more than the summary cards, then check the column mapping.
Each pH shows twice, under extra sites named with the paddock in front. An earlier import read a report's summary table too. Delete the extra samples in Soil Centre's Results view.
