Upload a crop plan or farm performance report PDF from your previous farm software to Crop Plan Import, check what Phase read, then import it. You can undo an import while nothing it wrote has been touched. To do it without leaving Crop Plan Studio, or to bring in your agronomist's recommendation, see "Import a PDF inside Crop Plan Studio" below.
Names came through wrong? Fix them in the review, before you import:
Paddocks: pick the right one under Choose your paddock…. Don't add a misspelt paddock as new.
Products: use Link to a product….
Crops and varieties are saved under the Phase library's names, with the report's wording shown as "as printed:".
Already imported? Rename a paddock in More → Paddocks & crops → Farms & Fields (the paddock's ••• → Edit, then Save field), or undo the import and import again. An activities CSV avoids reading slips, because the names come straight from your records.
Before you start
The export. Export the crop plan (planned season) or farm performance (season actuals) report as a PDF, with paddock details included. An activities CSV is quicker and more accurate: see Import activities from a CSV.
Permission. You need permission to edit crop plans. Recording season history also needs Record completed work. Otherwise the page says "Your role cannot edit crop plans on this farm, so the import button is disabled."
Trial. On trial, Phase reads five crop plan or farm performance reports. A long PDF counts as one, and coming back to a kept reading doesn't count again. A subscription has no limit.
Upload the report
Open More → Imports & templates → Crop Plan Import.
Select Upload PDF or CSV and choose the PDF.
Wait a minute or two while Phase reads it. A bar shows how much is left. You can leave the page: the reading carries on, and the bar picks up where it is when you come back.
Check the result. Read and checked to the dollar means every total matched the report's printed totals. Read with issues means some didn't, even after a second read; check the items under To check before importing.
Phase reads the pages as they look, so reports with scrambled hidden text still work. Actions → Quick walkthrough replays the five-step walkthrough. Upload a different file starts again.
Come back to a reading
You don't have to finish the review in one go.
Same device, within 14 days. Open Crop Plan Import again and the same review is there, with "Picked up where you left off" and when Phase read the report. Your paddock matches, farms, season, plan or actuals choice and product choices are kept (a match to a paddock deleted since goes back to Phase's suggestion). Nothing is read again.
Another device, or the app closed mid-read. A card, Your last reading, says when you uploaded the report. Select Open the reading to bring the review back from the pages Phase already read; only pages it never got to are read now. Paddock answers stay on the device you gave them on, so matches are suggested afresh. Hide stops it being offered.
Only your own most recent report is offered, and not once it is imported. Upload a different file starts again, and importing the report ends the kept review.
Check what it becomes and the season
Under What should this become?, check A crop plan or Season history (actuals). Change it if Phase picked wrongly.
Check the Season. Phase starts on your own season for the report's year ("Winter 25" when the report says 2025), not the printed label. It saves into a season you have, under its name as you spelt it, or creates one. On a farm with summer and winter crops, a report labelled "Winter 26" or "Summer 25-26" goes into that half. A two-digit year is read as that year, not the current one.
If Farms shows, choose which of your farms each farm in the report is. Paddock matching then stays inside that farm.
Match the paddocks
Paddocks: the one thing to check is the main decision. For each paddock Phase couldn't match by name and area, open Choose your paddock… and:
pick one of your paddocks (type to search), or
choose Add "name" as a new paddock and check its Paddock name, Area (ha) and Farm, or
choose Skip this paddock and leave it out.
On a new farm, Add all N as new paddocks or Skip all N settles them in one step. Show the N Phase matched lists the rest to check.
How matching works. A paddock whose number or letter differs is never matched or suggested: "North 1" is not North 10, North 2 or North B, and "Block 7A" is not Block 7B. An exact name wins, ignoring capitals, spaces and dashes. A slip in the words still matches when the number agrees ("Riversde North 1" is Riverside North 1). When two paddocks fit equally well, such as a North 1 on two farms, Phase leaves it for you. Closest of your paddocks in the picker never offers a differently numbered paddock either.
Check crop and variety names
Phase saves each crop and variety under its Phase library name, only where it is sure:
Tags after a variety come off ("Maximus CL (CL)" becomes Maximus CL), a short name gets its full name ("Jurien" becomes PBA Jurien), and a crop spelt another way is saved the library's way ("Lentils" becomes Lentil).
A Clearfield variety and its plain sibling are never swapped, and a variety only matches within its own crop.
A name the library can't settle, such as "red lentil", is saved exactly as printed.
A paddock sown to two crops keeps the first crop printed, with the other written in front of its variety.
Where a name changed, the paddock shows "as printed:" with the report's wording. A plan you already had gets library names only where it had none.
Check the products
Under Products: nothing you have to do, products link to yours by name. The rest import by name only, with their printed name, rate and cost.
Link to a product… picks one of your products or a library product (Change link once linked). The row's ••• holds Add as new product, Import by name only and Skip.
A product in litres, per 100 L or %, or one that is sprayed, never links to a seed variety, even when the names match.
An operation named as a cost (cartage or freight, lease or rent, a levy, fee or receival, insurance, hire, contract or aerial work) comes in as that kind of cost, shown as, for example, "cost: Lease & rent". Seeding, spraying and other operations stay machine work.
A seed dressing per 100 kg of seed imports as the per-tonne rate. A line whose rate unit Phase can't read is left out and named in the summary.
Link name-only products in Inventory later if you want labels, stock and future matching to connect.
Answer costs that look 1,000× too high
Some reports print money to three decimals ("21.515" a hectare), which can read as 21,515. A product reading over $1,000 a hectare is listed once under Costs that look 1,000× too high, with the likely figure and the PDF pages. Choose:
Use $21.52/ha (the likely figure), which divides that product's cost by 1,000 on every paddock, or
Keep as printed.
Nothing imports until every product listed has an answer. Machinery and contractor lines aren't asked about.
Fix a paddock that doesn't add up
Under What will be planned (or What will be recorded), a paddock whose activities don't reach its printed total opens with Doesn't add up. Check the PDF pages it names, then untick a row marked "Misread", or select Add the missing activity and enter it as printed, or tick Import as read: I've checked the PDF.
A paddock with no printed total gets a note in the read summary: check it against the PDF, as its program may have run onto a page with no paddock title.
Import the report
Open a few paddocks under What will be planned and compare them with the PDF pages listed.
Select Plan N activities on the season (or Record N completed activities on the season) at the foot of the page. If something blocks it, a line says so, such as "2 things to sort out before importing."
Read the short check (activities, paddocks, season, new paddocks, name-only products, how long you can undo), then select Import plan (or Record work).
The receipt shows what came in, and the PDF is filed privately in More → Money & records → Documents. For What next, see Crop plan import.
Undo an import
Straight away: select Undo this import on the receipt, then Undo import.
Later: within 7 days, open Crop Plan Import on the same computer or phone and select Undo last import under Your last import.
Undo removes the activities, product lines, plans, new paddocks and harvest yields the import wrote. Products it added stay. It can't be reversed. It's offered only while none of the imported work has been edited, completed, reconciled against John Deere, had stock deducted, or had other work added beside it. Otherwise Phase says "Undo is no longer available:" and why. It is kept for the person who made the import, on that device only.
Import a PDF inside Crop Plan Studio
Crop Plan Studio reads three kinds of PDF without sending you to Settings: a recommendation from your agronomist, a season plan, and a farm performance report. It uses the same reading and review as Crop Plan Import.
In Crop Plan Studio, open Actions at the top → Import a PDF… (under Start from last season…; it works with no paddock selected, on a computer and a phone), Plan tools → Import a PDF…, Import a PDF at the top of the Library, or Import in the season overview (on a phone, tap Season in the top bar first).
Drop the PDF on the sheet, or select Choose a PDF. Phase says in one sentence what it read, for example "A recommendation: Knockdown, 3 paddocks, 2 products, due 19 Mar 2026" or "A 2027 season plan for 12 paddocks, 60 passes".
Check which of your paddocks each one is. For a recommendation, link its products to your stock if you want to, and fill in anything marked Not in the document (such as the water rate, the application method or the due date), so nothing goes on blank without you seeing it.
Under What should this become?, choose:
Use as the plan: the passes go on each paddock's plan for the season as work to do.
Record as done: the same passes, recorded as done on the document's date. Stock is not deducted.
Save as a template: a saved activity in the Library for a recommendation, or one crop plan template per crop for a season plan. No paddock is touched.
Read the receipt. It says what happened in words and selects the paddocks it wrote to on the map. Undo takes it back while nothing it wrote has been touched.
Nothing is written until you choose what it becomes. A recommendation is read on your device and nothing is uploaded until you choose; a season report is uploaded and read page by page. A season plan's products come in by their printed name, rate and cost: to link them to your stock, use the full Crop Plan Import page. A PDF that is none of the three kinds says so, shows its first page's text and lists the kinds Phase reads. Record as done needs permission to record work as well as to edit crop plans.
A recommendation that prices the work in its operations table (for example "Boomspray application") sets the pass's application method, rather than putting that work on the pass as a product.
Good to know
Importing again is safe. Activities already in Phase show "Already in Phase, skipped", so only missing ones are added. Use this when a paddock came in short.
No stock is deducted from your Inventory.
Older imports stay as they were saved; today's matching and naming rules don't move them.
If something doesn't look right
A pass is missing, such as a seeding. Before importing, use Add the missing activity. Afterwards, add it in Crop Plan Studio and copy it across (see Change a product, rate or date across paddocks), and send support the report.
Wrong paddock, season or farm. Undo the import, then import again.
"This is an agronomist Recommendation." Select Open the recommendation importer.
"Phase read every page but found no paddock detail pages in this PDF." Export the report again with paddock details included.
A page itself is damaged or incomplete. Export a clearer PDF and upload that.
It fails, keeps retrying or doesn't look right. Email the file to support@phase.ag and we'll import it for you. Use Email us the file on the Didn't work? We'll import it for you card, or the link under a read error or on the receipt.
You'd rather chat. Open More → Help → Help chat with the farm, season and file name. If it won't open, use More → Help → Email Phase support.