Skip to main content

Work with client farms as an adviser

Sign up as an advisor, add clients who use Phase or invite a grower to Phase, open their farms, and track recommendations, notes and templates.

P
Written by Phase Team

Use one free advisor account to join your clients' farms, write recommendations and see what happened to them, turn paddock Notes into recommendations, and reuse plan templates across clients.

Before you start

  • Adding a client who uses Phase is free for you. Their farm needs an active Phase plan or trial for their code to work.

  • You can only do what each client shares with you. Writing recommendations and copying templates need Crop plans and recommendations, the Notes tab needs Notes, and their products and stock need Inventory.

  • For a grower who doesn't use Phase, see Run farms for clients with Phase Advisor instead.

Sign up as an advisor

  1. At www.phase.ag, create an account and choose Advisor or agronomist ("Free account. Join clients' farms with their access codes, or run farms for clients with Phase Advisor."). From the sign-in screen, choose Advisor or agronomist? Create a free account.

  2. On Check your email, type the six-digit code from the email, or press Confirm email in it. Your advisor account is ready opens.

  3. If a client has Phase, type their code in Farm access code and choose Continue, then Join farm.

  4. If a client isn't on Phase yet but would run their own farm on it, use Invite a grower to Phase under the code box (see below).

  5. If a client doesn't use Phase, choose Set up a client's farm under Client doesn't use Phase?. That starts your Phase Advisor trial and your first managed farm.

It is one login either way, and you can add clients of both kinds at any time. If you came from the Phase Advisor Start your free trial button on the website, the client-farm card is already open. If you also run a farm of your own, choose Set up a farm workspace; that starts your own farm's 14-day trial.

Add a client who uses Phase

Send your client these steps:

  1. Open More → Settings → Organisation → Team and choose Invite someone.

  2. Fill in Who is this code for?, set They join as to Advisor, and check What they can see.

  3. Choose Create invite code, then Copy code or Email it to you.

Then, in Phase:

  1. Open Advisor and choose Actions → Add a client. On a computer you can also choose Client on Phase — enter code at the foot of the client list.

  2. Type the code in Client access code and choose Join. Phase says "Joined" with the farm's name, and the farm appears in your client list.

You can also use Join organisation with access code in the farm switcher. Repeat for each client.

Invite a grower who isn't on Phase yet

  1. On your account's first screen, or on a computer under the client list in Advisor, choose Invite a grower to Phase.

  2. Type the Grower's email, and their name under Grower's name (optional) if you like.

  3. Select Send invite.

The grower gets one email: who invited them, 14 days of Ultra free with no card, and a Sign up to Phase button. Once they have set up their farm, Phase asks them whether to let you see it. Nothing is shared until they say yes. A yes makes you an advisor on the farm with an advisor's usual access, adds it to your clients, and emails you.

Invites you've sent lists each one as Waiting, Joined, Declined, Expired or Cancelled. An invite lasts 60 days. Cancel stops a waiting one, and Send again resends an expired one.

Open a client's farm

  1. In Advisor, select the client.

  2. Choose Open farm at the top of their page. If Phase is already showing that farm, the button reads Back to farm view. Phase switches to their farm and opens its Overview.

You see their paddocks, map, plans, records and inventory as they do, minus anything they haven't shared. A farm your practice manages has the planning and advice areas only.

The client's Overview says "You're advising" the client, with Their recommendations and All clients to take you back. A managed farm shows an Advisor Managed strip instead. It starts with weather, spray conditions, recommendations, Notes, plan summary, farm progress and rainfall; the rest are under Customise. The Recommendations card counts what's open, such as "3 open". If rainfall isn't set up on the farm, the Rainfall card says what it's waiting for. Your layout on clients' farms is kept apart from your own farm's.

Write and send a recommendation

  1. Choose New recommendation (New on a phone).

  2. If you started from All clients, pick the client under Who is it for?.

  3. Choose the Paddock and the Apply before date.

  4. To cover more paddocks, tick them under Also apply to, or use + Paddock or Pick on map.

  5. Add a Title, the products and rates under Products, the Water rate and Notes for the client.

  6. Read Checks as you add products. Phase checks rates and units, registration, poison schedule, withholding periods from the label, and a mode-of-action group repeated in the mix. Each check shows OK, Review, Blocked or Not checked, and a blocked paddock says Blocked in its chip.

  7. Choose Save draft to finish later, or Send to and the client's name.

Client on Phase. The recommendation arrives in their Phase account. Tick Email me a PDF copy when I send to get the PDF yourself.

Managed farm. The grower has no Phase login, so sending emails them the PDF. Email the PDF to the grower when I send is ticked for you.

Follow a recommendation after you send it

Recommendations lists every recommendation on your clients' farms, or one client's. Search by title, client or paddock. Filter → Status picks Drafts, Sent, In plan, Applied or Declined (which also holds withdrawn ones), each with its count. Clear it with the × under the search box.

Each recommendation says where it's up to, such as "Sent 23 Sept", "Accepted 22 Sept" (the grower approved it but hasn't added it to the plan yet), "Added to the plan 21 Sept" or "Applied 11 Sept · Glyphosate 450 at 1.5 L/ha", read from the grower's own completed job. A declined one shows the grower's reason if they gave one, and a withdrawn one says when.

Select one to open it at the side: the paddocks, Apply before, Water rate, who wrote it and when, Products, Notes for the client and What was applied, paddock by paddock. The ••• on each row holds the same actions:

  • A draft you wrote: Edit, Send to the client, or Delete. Download the PDF to check it first.

  • A sent recommendation the grower hasn't added to their plan: Withdraw. The grower sees it as withdrawn, and it stays on record.

  • Any recommendation: Download PDF (Share PDF on a phone), Email me the PDF, and Copy to other paddocks, which starts a new one with the same products and rates. On a managed farm, Email to grower sends the PDF again.

Turn a Note from the paddock into a recommendation

  1. Open the Notes tab. You see the latest spoken Notes from your clients' paddocks, read-only: what was said, where, and any products Phase heard (Heard:).

  2. Choose Draft recommendation where Phase heard a treatment. It opens with those paddocks, products and rates filled in. Otherwise choose Write recommendation for that paddock.

  3. Check the product matches, rates, units, water rate, timing and every paddock, then save or send it. Nothing is created until you do.

To add a Note in the paddock, see Add and follow up notes on the map.

Reuse plan templates across clients

Templates switches between My library, your own season programs that belong to you rather than any farm, and On clients (on a client's page, On and their name), the Crop Plan Studio templates saved on clients' farms.

  1. To keep a good program, open a template under On clients and choose Save to my library.

  2. To put a template on another farm, open it and choose Add to a client (from your library) or Copy to another client, then pick the client.

  3. Open that farm and apply the template from Library in Crop Plan Studio.

Delete removes a program from your library; copies already added to clients stay on their farms.

Good to know

  • Only the person who wrote a recommendation can edit, send, withdraw or delete it from the Advisor tab. On the farm itself, the farm's owners and admins can also change or delete it; another adviser on the same farm cannot.

  • Only drafts can be edited, and only a sent recommendation not yet in the grower's plan can be withdrawn.

  • A recommendation for several paddocks shows once in your list and the grower's. Each paddock is checked against its own crop. Sending it gives one PDF for the combined area, with a small map of the paddocks. Adding it to the plan creates an activity for each paddock.

  • Approve, ignore and delete act on the whole recommendation, so split it first if one paddock needs a different decision.

  • A template copy is a copy. Products are priced from each client's own stock, machines are left for them to add, and passes marked "if needed" stay conditional. Copying needs a client who lets you edit their crop plans.

If something doesn't look right

  • The client's code doesn't work. Their farm needs an active Phase plan or trial. Codes last a year and can be revoked, so ask the client for a new one.

  • A client is missing when you pick who a recommendation is for. They haven't let you write recommendations. Ask them to tick Crop plans and recommendations for you.

  • Something is missing on a client's farm. Check you've selected the right client, then check what they share with you. Ask them to share that one area rather than asking for wider access.

  • The Notes tab is empty for a client. They haven't shared Notes, or nobody has recorded one yet.

  • A client has gone from your list. They have removed you from their team or withdrawn your access. Ask them for a new code if that wasn't meant.

  • You can't see the Advisor tab. Open the farm switcher and set Workspace view to Advisor.

Related

Did this answer your question?