A recommendation says what to apply on one or more paddocks, at what rate and when. This article covers finding the ones your agronomist sends, writing or speaking your own, and adding them to the crop plan, ignoring or restoring them.
Recommendations waiting for a decision are in Overview → Recommendations → Inbox. On one paddock (Map → tap the paddock → Plan), a recommendation not in the plan yet sits at its due date with an amber Not in your plan yet badge.
Find your recommendations
On Overview, find the Recommendations tile. It shows who sent the newest one and how many wait, for example "3 to review".
Select Open, or tap the tile.
Choose a tab: Inbox (waiting for a decision, drafts included), In plan (added to a crop plan, not done yet) or Done (completed, ignored or rejected, kept as a record).
Select one to read it.
When one is sent, owners, admins and staff (not the sender) get a notification such as "Bec sent a recommendation: Pre-emergent spray". If the tile is missing, see Arrange your Overview.
Write a recommendation
On the Recommendations tile, select Write (or open the tile, select New, then Write it).
Choose the paddock. Phase opens it with the New recommendation composer.
Choose the type: Spray, Spread, Seed, Apply, Tillage, Harvest or Operation.
Enter a Title, a Due date and the type's details. A spray has Water L/ha, Droplet size, Method and Target (weeds / crop stage).
Select Add product and add a product with its rate and unit. Repeat for each product.
For aerial application or contract spreading, select Add cost, then under Charged choose Per hectare or Lump sum for this paddock. It shows under Costs, in the email and the PDF, and goes into the plan at its $/ha.
Open More details for Summary / issue, Notes / instructions, Send to and Photos. Send to starts as your own email address; change it if the PDF should go to someone else.
Select Save draft to finish later, or Save & send to email it as a PDF to the Send to address.
The same composer opens from Map → paddock → Plan → Plan tools → New recommendation (on a paddock with a plan for the season) and from Map Creator → Attach work → Create reco.
New reco, one question at a time. New reco, at the foot of a paddock's plan (the map's Plan tab, or Crop Plan Studio with one paddock selected), opens the same step-by-step card as Add: what to recommend, when, its details (with a Title; for seeding, the crop, variety and sowing rate), its products and costs, then a ticket with Send to (the grower on an advisor-managed farm, otherwise you), Note for the grower (optional), Save draft and Send, which emails the PDF as the composer does. More details on the first question lists your recommendation templates, saved activities and, for advisers, My library, and Also for these paddocks sends the same recommendation to more paddocks: each paddock gets its own copy and the grower gets one email. On the check, More details holds the summary of the issue and photos (attach them or take one there and then).
Templates. Templates at the top of the composer lists the farm's templates and your Saved activities. A saved activity fills in the products, rates, water rate, method, target and notes, and the due date if it's empty; machines and per-tonne costs stay with the plan. Template at the bottom saves this one as a farm template.
Speak a recommendation
On the Recommendations tile, select Voice (or New → Speak it).
Select Start recording and say what, the rate and where, for example "Spray North 1 and North 3 with glyphosate 450 at 1.5 litres, next Tuesday."
Select Finish.
Check what Phase heard under Products heard and Where this applies. If no paddock matched, choose one under Paddock.
Select Review in composer. Every matched paddock starts ticked.
Check each product line: In your shed, Product Library, Check match or No match. Select Use … (with the product's name) to accept a close match, Find product to search, or the pencil → Keep name unlinked.
Check every rate, unit, water rate and paddock, then save.
Nothing is saved until you save. Voice only shows if your access includes Notes. A Note with a recording (Add voice note) that describes a treatment can also become a draft recommendation: see Add and follow up notes on the map.
Apply one recommendation to several paddocks
In the composer, under Also apply to, pick paddocks from the + Paddock list. It has every paddock on the farm.
Or select Pick on map, tap each paddock (tap again to take one off), then select Use 3 paddocks (the number matches). Paddocks without a boundary are listed under the map as No boundary.
Save as usual. The buttons read, for example, Save 3 drafts and Save & send 3.
It stays one recommendation: one Inbox entry and one emailed PDF naming every paddock. If you take off the recommendation's own paddock, the first one left takes its place.
The map on the PDF. The PDF shows the paddocks from their boundaries, north up, with a scale bar. Dams and other areas cut out of a boundary are left blank, and a paddock with no boundary is left off. A plan activity emailed as a PDF gets the same map. A recommendation sent before 19 October 2026 gets the map when sent or downloaded again.
Add a recommendation to the plan
Open Overview → Recommendations → Inbox and select the recommendation.
Select Add to crop plan. This approves it and adds it to every paddock it covers.
If a paddock already has a planned pass this may firm up, choose Replace planned pass (named with its date, for example "Post-em · 4 Jul") or Add as a new pass. For several paddocks, choose for each, then select Add to 3 plans.
On a paddock's Plan tab, Add to plan on the card does this for that paddock only. To approve without adding, select View → Approve.
It then moves to In plan. On the Plan tab the activity has a Reco badge. In Crop Plan Studio a new pass is named "Reco ·" and the title; a replaced pass keeps its name.
Replace or add as new. Phase offers passes not done yet, of the same kind of work, due within about three weeks or already using a recommended product. A replaced pass keeps its place in the program but takes the recommendation's date, rates and products, so nothing is counted twice in cost or in what you need to buy. It keeps its machines, your own price on a product it had, and its costs unless the recommendation brings its own. A pass with recorded work, a prescription map or a John Deere job can't be replaced and says why. Add as a new pass keeps both.
Which season. A recommendation written against a paddock's plan goes into that plan, not the season on screen. Otherwise it goes into the paddock's plan for the season on screen, and Phase starts one if needed.
Marking the pass done completes the recommendation, and your adviser sees it as applied.
Ignore, reject or restore
Ignore in the Overview list or on a paddock's card moves it to Done. Nothing is deleted.
Reject: on a paddock's card select View → Reject and give a reason, shown in its detail.
Restore: in Overview → Recommendations → Done, open an ignored or rejected one and choose Restore. It returns to the Inbox.
Change or delete a recommendation
Open Map → the paddock → Plan and select View on the recommendation. It lists the paddocks, for example "3 paddocks: North 1, North 3, Creek Flat".
Select Edit and make your changes. They apply to every paddock, and you can add or remove paddocks as when writing it.
Select Save draft, or Save & send to email the updated PDF.
Removing a paddock deletes its copy when you save, after a warning. Edit shows only while it is a draft or sent on every paddock. Once any paddock has approved, ignored, rejected, added or finished it, it is fixed.
Delete in the Overview list removes it from every paddock. View → Delete removes one paddock's copy. An activity already in the plan stays; delete it separately.
Who can do what
Owners, co-owners and admins can always write recommendations. Staff and advisers can too, unless their access has it turned off. View-only logins can't.
Edit and Delete show only to whoever wrote it, or the farm's owner, co-owner or admin, so one adviser can't rewrite or remove another's.
Anyone else who can write recommendations can approve, ignore, reject, restore and add them to the plan (an adviser also needs crop plan editing). Anyone who can record work completes one by marking its pass done.
Good to know
To give a recommendation to staff as a job, add it to the plan, then open the pass in Crop Plan Studio and select Assign. See Give a planned pass to someone as a job.
A recommendation PDF from your agronomist can be read onto the plan in Crop Plan Studio with Plan tools → Import a PDF…: use it as the plan, record it as done, or save it as a template (see Upload and review a crop plan report). More → Imports & templates → Recommendation Import (marked In development) still works too.
Advisers write for clients from the adviser workspace: see Work with client farms as an adviser.
If something doesn't look right
Save & send is greyed out. Add a Title, and a Send to address under More details.
"Choose a product match for …" when saving. A line still says Check match or No match. Accept a match, use Find product, or choose Keep name unlinked.
No Write, New or New reco. Your access doesn't include recommendations; ask the owner or an admin. New reco also needs a plan on that paddock.
A recommendation isn't on a paddock's Plan tab. The tab shows only open ones, and only when the paddock has a plan for the season on screen. Find it in Overview → Recommendations.
Added on one paddock, the rest still in the Inbox. Buttons on a paddock's Plan tab act on that paddock only; the Overview list acts on every paddock.
The PDF has no map. Its paddocks have no boundary: see Draw, import or export paddock boundaries.