Use this to add a paddock and draw its boundary, fix a boundary by moving, adding or deleting corners (points), bring boundaries in from a KML, KMZ, GeoJSON or shapefile, or send them out to an insurer, a machine display or Google Earth. It also explains total area and arable area.
Before you start
Everything here is in Farms & Fields: on a computer, More → Paddocks & crops → Farms & Fields; on a phone, More in the bottom bar → Farms & Fields.
Owners, co-owners, admins and staff can do this. Advisers and view-only logins can't, unless the adviser runs the farm through Phase Advisor.
With no farm yet, select Add farm first, name it and select Create farm.
Add a paddock
Select Add field beside the farm.
Type the Field name, for example "Creek Flat".
Under Boundary, select Draw boundary (see below), or Import boundary to take it from a file. The area fills in from the boundary. You can also type a Total area and choose Hectares or Acres.
If only part of the paddock is cropped, type the cropped hectares in Arable area (optional).
Pick a Colour if you like.
Select Create field.
Draw a boundary
In Add field or Edit field, select Draw boundary. The satellite map opens, with your other paddocks as faint dashed outlines.
Tap the map at each corner of the fence line.
Tap the first corner again (it says Tap to finish), or select Finish shape.
Select Use drawn boundary.
Select Save field (or Create field). Nothing is saved until you do.
It works the same on the phone apps: drag with your finger and pinch to zoom.
Fix a boundary or delete corners
Open the paddock's ••• menu → Edit.
Under Boundary, select Edit boundary on map. Every corner has a handle.
Make your changes. Corners and Area update as you go.
Move a corner: drag it to where the fence really is.
Add a corner: drag the small dot halfway along an edge, or tap it to add a corner in the middle of that edge.
Delete a corner: tap it, then select Delete corner. On a computer the Delete key works too. A boundary always keeps at least three corners.
Undo: select Undo to step back one change at a time (Ctrl+Z, or ⌘Z on a Mac).
Start again: Start over clears the boundary so you can draw a new one.
Select Use this boundary, then Save field.
A paddock in more than one piece, or with a dam or scrub cut out of it, keeps every piece and cut-out, each with its own handles.
Boundaries with hundreds of corners. Boundaries from John Deere or CNH can have a corner every metre or so. Zoom in until the handles are far enough apart to grab. With 150 or more corners, many of them not needed, Simplify corners appears. It keeps the line within half a metre of where it was, and Undo reverses it.
To take a boundary off a paddock, select Remove boundary in Edit field, then Save field. This clears its area too.
Import boundaries from a file
Phase reads .kml, .kmz, .geojson or .json files, or a shapefile saved as a .zip with its .prj file inside.
Select Actions → Import boundaries, or Import boundaries in a farm's ••• menu.
Choose the file. A large file can take a minute to read, so keep the screen open.
Under Import into farm, pick the farm, or choose + Create new farm and name it.
Check each paddock. Each row shows its shape and says what it is, for example "2 pieces · 1 cut-out". You can change its Field name, Farm, Area (ha) and Arable area (ha, optional), or untick it.
Where a paddock is already in Phase, choose what happens:
If it already has a boundary, choose Update boundary to replace its boundary and area, or Skip to leave it alone. Skip is chosen to start with. Replacing a boundary can't be undone.
If it has no boundary yet, the row says the file "Adds this boundary to your paddock". Choose Add boundary or Skip.
Select Import (the button gives the count, for example Import 12 Fields).
A paddock split by a road or creek comes in as one paddock in pieces, not as "Creek Flat 1" and "Creek Flat 2". A dam, scrub block or gravel pit cut out of it comes in as a hole, left out of its hectares.
Imported your crop plan first? Those paddocks have no outline yet. The boundary file puts each outline onto your paddock of the same name instead of making a second one. Nothing is replaced, the paddock keeps its area unless you type one, and a paddock with no farm joins the farm you are importing into.
How names match. Capitals, spaces and dashes don't matter, but "North 1" never matches North 10, North 2 or North 1B. Paddocks doubled up by an earlier import are not merged for you: use Merge (see Merge, split or delete a paddock).
One paddock only. Open its ••• menu → Edit → Import boundary (or Replace boundary), choose a file holding only that paddock, then Save field. The whole shape comes in, pieces and cut-outs included. If the file holds more than one paddock, Phase opens the full Import boundaries review instead.
Import from CNH is not a file upload. Import from John Deere and Import from CNH pull paddocks straight from those accounts. For a file, use Import boundaries.
Export boundaries
Select Actions → Export boundaries, or a farm's ••• menu → Export boundaries to start with that farm ticked.
Tick a farm to take all its mapped paddocks, or open it and tick single paddocks. Find a farm or paddock searches by name.
Under Format, pick one:
Shapefile (.zip): machine displays, John Deere, CNH, GIS programs and drone controllers.
KML (.kml): Google Earth and most mapping apps, and when an insurer asks for a KML. Each farm is a folder and each paddock is drawn in its Phase colour.
GeoJSON (.geojson): web maps, QGIS and developers.
Select the export button, for example Export KML. On the phone apps the file goes to the phone's save or share sheet.
Every format carries each paddock's name, farm, total hectares and, where only part is cropped, its arable hectares. Pieces stay one paddock and cut-outs stay holes. The shapefile includes a README explaining its columns. Paddocks with no boundary are listed but can't be ticked. Phase remembers your last format on that device, and a Phase export imports back as the same paddocks.
Set the total area and arable area
Total area follows the fence-line boundary. Arable area is optional: the hectares you actually sow, when timber, dams or grazing country inside the fence won't be cropped.
Open the paddock's ••• menu → Edit.
Type the cropped hectares in Arable area (optional), or leave it blank if the paddock is cropped fence to fence.
Select Save field.
Uses the arable area, when there is one | Uses the total area |
Crop Plan Studio and crop plans | Boundaries and map labels |
Product quantities and costs per hectare | Farm totals |
The area filled in when you mark work done | Livestock stocking rates |
Yield per hectare and Phase Agent's rate sums |
A blank arable area means the whole paddock is cropped, so existing paddocks don't change until you type one, or until you import a John Deere boundary with ground cut out of it.
From John Deere. When Import from John Deere brings in a boundary with a dam, scrub or a rocky rise cut out, the whole paddock becomes the Total area and John Deere's workable hectares fill a blank Arable area. An arable area already on the paddock is never replaced. See John Deere Operations Center.
Good to know
Drawing, importing or replacing a boundary, or updating it from John Deere or CNH, sets the area in hectares. On a paddock kept in acres, the arable area is converted at the same time. Before 15 October 2026 it wasn't, so it could read up to 2.47 times too large: if an acre paddock had its boundary replaced before then, check its arable area in Edit.
Open the boundary editor and leave the shape alone, and the area stays as you typed it.
Paddocks imported before 28 September 2026 were not changed. If one came in as several paddocks, delete the pieces and import again, or import with Update boundary onto one and delete the rest.
If something doesn't look right
"Phase can read .kml, .kmz, .geojson/.json, or a shapefile exported as a .zip". Export the boundaries again as one of those types.
"That boundary file is in metres, not latitude and longitude". The zip is missing its .prj file. Zip it in with the other shapefile parts, or convert the file to latitude and longitude (WGS84).
"No polygon boundaries were found in that file". Check the file holds paddock areas (polygons), not only lines or points.
The area looks wrong after dragging. The warning "The boundary crosses over itself" means a corner crossed an edge. Drag it back, or select Undo.
John Deere boundaries came in wrong or in pieces. Run Actions → Import from John Deere again and choose Update existing for those paddocks. Nothing needs deleting first.
Export boundaries is greyed out, or a paddock can't be ticked. It has no boundary yet. Draw or import one from the paddock's Edit.