Every product line on a crop plan has a price, and Phase adds those up with machines and other costs into the cost per hectare, the season's input cost and each crop's gross margin. This article explains where a line's price comes from, how to change it on one line or for every plan at once, and how to set the grain price and expected yields that drive the gross margin.
The quick answers:
Where does a line's price come from? A line linked to an Inventory product follows Inventory's price, unless you type a price of your own on the line.
I added the product to Inventory after planning, and the price hasn't come across. The line probably isn't linked. Open the pass (in Crop Plan Studio or on the paddock's Plan tab): under the line it says Not linked to inventory: matches the product, with Link to inventory. Tap it and the price follows.
Quickest way to price everything without opening each activity? Actions → Edit prices… in Crop Plan Studio, then Save and update plans.
Where do I enter my expected yield? Select the crop's paddocks in Crop Plan Studio (or open a paddock's Plan tab), select Details on the crop line, open Gross margin, and set Price and the Bad, Budget and Bumper yields. Press Save assumptions.
Where a plan line's price comes from
Every product line says its price in words, and where it comes from, for example "$6.20/L inventory price" or "plan price", with its cost per hectare under the rate. It works the same on the paddock's Plan tab, in Crop Plan Studio (the Plan page) and on templates.
A line linked to an Inventory product follows Inventory's price until you type a plan price. Inventory's price is, in order:
the price you last set for the product, until newer stock arrives; else
the average price of the stock on hand; else
the price of the last lot you bought; else
the product's List price in Inventory.
With none of those, the line stays blank rather than reading $0.
A line added before its product had any price picks up Inventory's price as soon as there is one, and the $/ha and totals update. You don't need to accept it.
Inventory's price is converted from however the stock was bought. A tonne of urea prices a kg/ha rate correctly, whichever unit the line's price is shown in.
Change the price on one line
Open the pass, in Crop Plan Studio or on the paddock's Plan tab.
On the product's row, tap ••• → Change the price…. The price box opens under the row.
Type the new price. Check the small unit beside it, for example /t. Tap it to switch between per kg and per tonne, or per L and per kL.
Press Save under the row.
A typed price becomes a plan price for that line only. Inventory and your stock lots don't change. A typed price that matches Inventory's isn't treated as a plan price.
Which unit the price opens in. Fertiliser, cereal seed and anything else put out at 20 kg/ha or more opens per tonne, as does a product you stock by the tonne. Liquids at 20 L/ha or more open per kL. So urea is typed as $912/t, not $912/kg. Chemicals and canola seed open per kg or L.
When you switch the unit, a number you typed keeps its value and is read in the new unit. A price Phase filled in is only shown in the new unit, so a line saved at $0.912/kg shows as $912/t.
Over $1,000 a hectare. No single input costs that much, so Phase asks before saving. For example: "That prices Urea at $114,000.00/ha … Was $912.00/t meant? That is $114.00/ha." Choose Use $912.00/t or Keep $912.00/kg. A line already over $1,000/ha shows the question on its pass card with the fix one tap away, but only holds Save changes while you're editing that line.
Changing the rate keeps how the line is priced. When you change anything but the price:
a line that follows Inventory keeps following it, costed at today's stock price for the new rate;
your own plan price stays;
a line with no price stays unpriced instead of being saved at $0.
The price box opens at the price the line is actually costed at. A following line whose product has no Inventory price says "No inventory price for this product. The line keeps the price it was planned at." A line pinned to an old price by an earlier edit can be put back with Use inventory price.
Link a typed line to Inventory
Only a line linked to an Inventory product can follow stock. A line typed by name, rather than picked from Inventory, can't.
Open the pass, in Crop Plan Studio or on the paddock's Plan tab.
Find the line that says Not linked to inventory: matches a product.
Tap Link to inventory.
The price now follows Inventory. To link many lines at once, use Plan check… → Link N lines to inventory. See Check a crop plan for mistakes.
When Inventory's price changes
If a later invoice moves Inventory's price under a line that is following it, the line shows Inventory price is now $X, with Use $X (re-cost the plan at the new price) or Keep $Y (keep the old price as a plan price). A line with no price yet offers Leave unpriced instead of Keep $Y. The pass shows a Price changed chip.
Lines with a plan price (including one you chose to leave unpriced) are never re-priced or nagged. They show Inventory's price quietly, with Use inventory price to go back to it.
Inventory's price is never copied onto a line, or offered as Use $X, if it would make the line cost more than $1,000/ha. The notice says the stock lot is probably in the wrong unit and points you at it.
Price every product at once
In Crop Plan Studio, open Actions (the ••• button on a phone) and choose Edit prices…. The grid lists the Inventory products on this season's passes still to do: chemicals, fertiliser and seed together.
Click a price and type, or paste a column from a spreadsheet. On a phone, tap a price, then tap again to type.
Choose how to save:
Save sets the product's price in Inventory from today.
Save and update plans also puts it on plan lines that follow Inventory, for work not yet done, from this season on. Finished work is left alone.
If some lines carry a price you typed on the plan, the confirmation offers Also replace the price typed on a plan (or Also replace the N prices typed on plans). It starts unticked. Tick it and those lines take the new price and follow Inventory from then on.
Products on the plan that aren't linked to an Inventory product are named under the grid, with a pointer to Plan check, which can link them.
The same grid is in Inventory → Chemicals, Fertiliser, Seed or Parts & other → Actions → Edit prices, listing every product in that section. A new price is saved on the product with today's date. Deliveries keep the price they were bought at. See Set and change product prices.
Editing prices needs the same permission as Inventory's Edit prices. Without it, Edit prices… is greyed out with the reason.
Set the grain price and expected yields
In Crop Plan Studio, select the crop's paddocks (or open one paddock's Plan tab).
Select Details on the crop line, then open Gross margin.
Type the Price in $/t.
Type a Bad, Budget and Bumper yield in t/ha. Leave a box empty and that scenario follows the farm's yield history. Each box says whether the number is yours or from history.
Press Save assumptions.
The closed strip shows the three margins side by side. Open, the table shows the season, yield, income per hectare, gross margin per hectare and total, with the input cost, break-even yield and area underneath.
Budget is the yield Financial Performance's Budget gross margin is priced from. Its Actual or Forecast figure uses the harvest once one is recorded for the crop. See Gross margin: what it covers and how grain is priced.
Try a low and a high grain price
Beside Price are Low price and High price. Set either, press Save assumptions, and the open strip adds a table of gross margin per hectare for a bad, budget and bumper season at each price. It shows how a price drop or a good market changes things.
Low, price and high must run from lowest to highest.
Finances still works from your one Price. Low and high are for the margins only.
When set, they show under each crop on the season plan PDF (and the emailed copy), the Reports page Crop Plan preview and PDF, and the gross margin sheets in the CSV and Excel exports.
Copying a plan brings them across to the new paddock.
Mark a crop dryland or irrigated
Select a crop's paddocks, open Details on the crop line, and choose Dryland or Irrigated beside Cropping method. Clear takes it off again. Undo and Change history work as for any plan edit.
The season plan PDF shows it beside the paddock count on each program, and on each paddock when a program mixes both.
The Reports Crop Plan CSV and Excel export add a Cropping method column next to Variety once any paddock has one.
Copying a plan brings it across. Starting a new season from last season doesn't.
What the plan's costs and margins count
Crop Plan Studio rolls up crop area, planned nutrition, input costs and gross margins across the farm.
Products, machines and other costs all count in the activity's $/ha, the plan's budget and the gross margin. Other costs include cartage, receival fees, hire and leases, added with Add cost on the pass. See Add notes, machines and other costs to a job.
Conditional passes (ticked Conditional: only if it is needed) are left out of every committed figure, and shown as possible.
Undersown pasture seed is the pasture's establishment, so it's left out of the crop's costs and gross margin. See Plan a seed mix or a pasture sown under the crop.
Don't count freight twice. If the grain price you enter is already net of freight and receival fees, don't add those as costs as well.
How a crop's margin is added up. Every paddock is worked out on its own price, yields and inputs, and a crop is those paddocks added up. So a crop's figures always match its paddocks, even when they have different prices. The crop then shows the average price, marked "avg" on the PDF.
A paddock with no price, no yield or no inputs planned yet is left out of its crop's total, because counting it would overstate the margin. The spreadsheets still list it, marked price not set, no yield set or recorded or no inputs planned, and the crop says what it leaves out.
The same gross margins come out on the Gross margins page of the season plan PDF and in the crop plan spreadsheets. See Share, print or export a crop plan.
Treat these as planning estimates. Check crop prices, yield assumptions, product prices and paddock areas before relying on the result.
If something doesn't look right
A line has no price. Its product has no price in Inventory yet, or the line isn't linked. Link it (above), give the product a List price or a stock lot in Inventory, or type a price on the line. Plan check… lists every unpriced line.
A linked line still shows no price. Contact Phase support with the paddock, activity and product.
A cost per hectare is huge. A price per tonne was probably typed as a price per kg: switch the unit to /t. If the notice says Inventory's price looks like a per-tonne price on a kilogram stock lot, fix the lot in Inventory. The plan keeps its price meanwhile.
Edit prices… is greyed out. Your farm role can't change Inventory prices. Ask the owner or an admin.
A product isn't in the Edit prices grid. It's not linked to an Inventory product, or it's only on passes already done. Products not on this season's plan are in the Inventory grid: open the product's section in Inventory, then Actions → Edit prices.
There's no Gross margin. It is under Details on the crop line, and shows once the paddocks have a crop and some priced inputs planned. Give the paddocks a crop and price their products first.
The strip shows no margins. Set a Price. If the crop has no yield history on the farm, also set the yields, then Save assumptions.
I can't type prices in Demand. Demand in Inventory only shows the estimated cost at Inventory prices. Price products with Edit prices or a List price. See Check what the plan needs against your stock.