Skip to main content

Check what the plan needs against your stock

See what your crop plans need, what you have, what is confirmed incoming and what you still need to order.

P
Written by Phase Team

Before you order, compare what your crop plans still need with what's in the shed. Demand in Inventory lists every chemical, fertiliser or seed the season's plans need, with what's on hand, what's short and roughly what it costs. Inputs in Crop Plan Studio adds confirmed orders and machine hours.

Demand looks empty, or is missing next season's products? Check the season at the top of the screen. Demand only shows the season selected there, so set it to the plan's season (for example 2027).

See what the season needs in Inventory

  1. Check the season at the top of the screen (beside your farm name on a computer). Tap it to change it.

  2. Open Inventory → Chemicals, Fertiliser or Seed.

  3. Select Demand in the row under the heading.

You'll see Season requirements with the season, such as 2027 season, and a count such as 3 stock shortfalls. The Season total gives roughly what the season's outstanding inputs cost and how much is still to buy. Each product shows the planned quantity, Short and the amount (or Covered by stock), what's On hand, and a cost such as "≈ $4,250 at $8.50/L". By farm and By crop group the same products, each with its own total.

Products with stock on hand sit at the top and products with nothing in the shed sit at the bottom, so the list reads as an ordering list. Tap a product that's in Inventory to open it. If another section is short too, Demand says so, for example "Also short: 2 in Fertiliser". Tap it to go there. In the Stock view, a product the plans need more of than you hold shows Need and the amount.

What Demand counts:

  • Passes still to do and committed. A pass marked Conditional in Crop Plan Studio (a fungicide that only goes on if disease turns up) isn't counted until it's committed or done. Studio's Inputs shows it as "possible", Financial Performance leaves it out of the budget, and Phase Agent leaves it out when it works out what a season needs.

  • Plan products not in Inventory. They show the planned quantity with nothing on hand. A plan product not yet in Inventory goes by its activity: seeding to Seed, spreading to Fertiliser and everything else to Chemicals.

  • A spot spray counts only the part of the paddock it covers.

  • Summer and winter crops. On a farm with both, Demand counts both halves for the whole crop year, and the header reads, for example, 2026 summer and winter. A product both crops use shows as short when together they need more than you hold. See Switch farm or season, and set up seasons.

Costs are at Inventory's price for each product: a price you set, else your stock's price, else its list price. A product with no price at all is counted as "unpriced", not guessed. You can't type prices in Demand; give products a List price or use Edit prices. See Set and change product prices.

Demand works out quantities the same way as Inputs in Crop Plan Studio, so the two agree. Livestock and Parts & other have no Demand, because plans don't call for vaccines, filters or twine.

Check inputs and stock in Crop Plan Studio

  1. Open Crop Plan Studio: Plan in the top bar on a computer, or More → Paddocks & crops → Crop Plan Studio on a phone.

  2. Select Actions (••• on a phone) → Inputs. Or, with no paddock selected, use the Inputs shortcut in the season overview (on a phone, tap Season in the Studio's top bar first).

  3. With paddocks selected, choose Whole farm or Selection · N (N is how many paddocks) at the top of Inputs and capacity.

For each product you'll see:

  • Allocated: what every plan on the farm needs, because the shed is shared. A selection that looks covered on its own may not be. With Selection · N on, this column is Needed here, with the whole-farm figure underneath.

  • On hand: stock in Inventory.

  • Still required: allocated, less on hand, less confirmed incoming. It says Covered when there's enough, or Stock not tracked when the product isn't in Inventory, rather than looking covered.

A product used only on a conditional pass shows as "possible" beside the requirement. A product planned in L on some passes and mL on others (or g, kg and t) is one row, checked once against stock. Units that can't be added together stay on separate rows that point to each other. Tap a product's paddock count to open it in Find a product.

Planning never takes product out of stock. That only happens when a pass is marked done. See Mark work as done.

Record an order that's confirmed but not delivered

  1. In Inputs and capacity, select Add confirmed incoming… under the product.

  2. Fill in Quantity, Unit, Expected (the date) and Supplier.

  3. Select Add.

The order shows on the product in Inventory under Confirmed incoming, with It has arrived and Not coming. It's never counted as stock on hand. Marking it arrived only clears it from the list: receive the product as usual with Add stock or an invoice to put it into stock.

Export demand or stock

  1. In Chemicals, Fertiliser, Seed or Parts & other, select Actions (••• on a phone) → Export. (On Demand, the Export button opens the same choices.)

  2. Choose PDF or CSV.

  3. Choose Demand and what is in stock, Demand only or Stock only.

  4. Under Kind of stock, leave Everything, or tap more than one kind (Seed and Chemicals, for example). Tapping Everything again clears the mix.

  5. Select Export PDF or Export CSV.

The PDF is laid out like the inputs in the Crop Plan Report: a card per product with "Planned requirement · 12 paddocks" under its name, the quantity on the right and, when stock is included, what's on hand. Stock the plans don't use follows as its own group, such as "In stock, not in the 2027 plans" ("Stock on hand" for a stock-only export). The CSV is a plain table: Source, Product, Quantity, Unit, On hand (when stock is included) and Paddocks. Big figures are shortened as on screen, so 112,000 mL is written as 112 with L in the Unit column; Quantity and On hand are always in that unit. A file with two kinds of stock is named after both.

The footer links to Inventory Stock report (with values) in Reports. Fuel and Machinery have their own Export under Actions: the fuel log, and the Machinery workbook with the machine list.

Estimate machine hours for a window

Under the inputs, Machine hours in a window adds up the committed hectares planned for each machine.

  1. Set From and To. It starts on your seeding window.

  2. Optional: fill in Hours a day (optional) to see the estimate in days.

  3. Read each machine's estimate, for example "about 46 h" and "≈ 4 days at 12 h".

The estimate is hectares divided by the machine's work rate, which you record once in hectares an hour: right there with Record its work rate, or on the machine under Running cost, fuel & work rate → Work rate ha/hour. See Add and organise machines and tools. A machine with no work rate gets no estimate. Passes with no machine or no date are listed as not counted, conditional passes are left out, and weather, breakdowns, filling and travel aren't allowed for.

If something doesn't look right

  • Demand shows "No demand for 2027". No 2027 plan activity still needs products. Check the season at the top, and that the passes aren't all done or conditional.

  • A product we need isn't showing as short. Check whether its pass is Conditional, and check the rates, units and paddock areas on the plan.

  • The same product shows twice. It may be in Inventory twice, or planned in units that can't be added together. See Find, merge or delete a product.

  • On hand says "check units". The product's stock units don't add up. See Add products and stock.

  • The cost looks wrong. Check the product's price. See Set and change product prices.

Before ordering, check the rates, units, paddock areas, prices and stock records behind the figures.

Related

Did this answer your question?