Skip to main content

Ask Agent in Crop Plan Studio to change the plan

Type what you want changed in Crop Plan Studio's Agent tab and approve the proposed change before it applies.

P
Written by Phase Team

Ask Phase is the planning agent inside Crop Plan Studio (the Plan page). Type what you want in the words you'd use with an agronomist, such as "Bring all the wheat up to 100 units of N", and Phase shows you exactly what would change. It also answers questions about the plan, like "What do we need to order?"

Does it change my plan straight away? No. Every change comes back as a card marked Proposed change and "Nothing applied yet". The plan only changes when you select Apply, and one Undo takes the whole change back.

Before you start

  • Ask Phase works on the season you're looking at. Check the season in the Studio's top bar first. If you name another season, it asks you to switch to that season and ask again.

  • Anyone who can see crop plans can ask questions. Applying a change needs permission to edit crop plans; others see "View only: you can't change crop plans."

  • Ask Phase edits the crop plan you're looking at. For questions across the whole farm (stock in the shed, weather windows, yield, labels, livestock), use Agent in the main navigation, which is Phase Agent. Opened from the Studio, Phase Agent knows you're in crop planning.

Open Ask Phase

  1. Open Crop Plan Studio: on a computer select Plan in the top navigation. On a phone, go to More → Paddocks & crops → Crop Plan Studio.

  2. On a computer, select Agent in the Studio's top bar, or the Agent tab beside Library in the left column. On a phone, open Actions (the ••• in the top bar) and choose Agent; Ask Phase opens as a sheet from the bottom of the screen.

  3. Read the line at the top. It says which season's plan you're working on and what is selected, for example "3 paddocks selected · 240 ha. Changes go here unless you say otherwise."

To get started, open Example requests and tap one to put it in the box. Clear empties the conversation.

Ask for a change

  1. Select the paddocks on the map, or name them in your request ("all the wheat", "North 1 and Creek Flat").

  2. Type the change in Ask about or change the plan… and send it. A Proposed change card appears.

  3. Check the card: the paddocks and hectares it covers, the figures before and after, the product and cost difference, and any paddocks in your request that won't change, each with the reason. Those are listed separately and never folded into the total. Bigger changes also show the working and what the figures rest on.

  4. Select Show to select those paddocks on the map first, if you want to see them.

  5. Select Apply to N paddocks to make the change, or Cancel to drop it.

The change is written the same way as an edit made by hand, and the change history records it as Asked of Phase, with the words you used.

Undo it. Select Undo Agent change on the card, type "undo that", or use Undo in the Studio's top bar.

If other changes have been made since, the card says so. Undo in the top bar steps back to it, but takes back the later changes first. To take back only this change, open Actions → Change history, tap the row and select Undo this change. If later edits make that impossible, it says why.

What you can ask it to change

Rates and nutrition. "Make the glyphosate rates 1.5 L", "Increase urea by 30 kg", "Round all urea rates to the nearest 10 kg", "Bring all the wheat at Banksia Downs up to 100 units of N", "Put another 20 units of N on the canola". "To" and "by" are never mixed up: "up to 100 units" is a season total, and "another 20" is an addition. If N goes on through more than one pass, Phase asks which pass should carry the change (or to split it) instead of picking for you. Answer with a tap or a few words ("the last pass", "just the urea").

Products in a pass. "Add 3 g of metsulfuron to the first post-em spray on every paddock following lupins". "First" and "last" work with any pass ("the last fungicide spray") and mean the earliest or latest by date on each paddock. "Following lupins" finds the paddocks however the crop was recorded ("Narrow Leaf Lupin", "Lupin" and "Lupins" all count). When nothing matches, the reply says what was recorded in those paddocks that season. The product goes in at the rate you gave; Phase doesn't choose a rate or check the label.

Swaps. "Swap all the glyphosate 450 for glyphosate 540".

  • When the two are different strengths of the same active, Phase asks whether to keep the litres or keep the active going on, and shows the converted rate.

  • If they share no active, it says so plainly and never calls a different chemistry an equivalent.

  • You can give the new rate and price in the same sentence: "at 1.2 L and $9.80/L". A price that matches inventory keeps those lines following inventory. A different one is kept as a plan price on those lines only, and inventory isn't changed.

  • With no unit, a price at a fertiliser-sized rate is read per tonne. A price that doesn't make sense is queried ("Did you mean $900 per t?") rather than dropped.

  • A pass with a zone prescription for the old product is left alone, with a note to change it in Spatial.

Budgets. "Budget the wheat at 3.2 t and $380", "wheat price 380, low 320, high 420", "bumper 4.5 t on canola". These figures are set on that crop's paddocks only, with Undo. A low or high figure on the wrong side of the budget figure is refused, and so is a change by an amount: give the new figure.

The program. "Move the whole program back a week", "Bring the fungicide forward 3 days", "Make the fungicide conditional", "Delete the knockdown pass", "Apply the standard wheat template to all wheat", "Make Creek Flat match North 1".

Follow-ups. Keep talking: "actually make it 110", "just the urea", "except Creek Flat", "round to the nearest 5". The request on the table is amended, and the earlier version is marked "Replaced by the version below" and can no longer be applied.

If a request has several parts, Phase shows them together. To correct one part, name it: "part 1 make it 92 kg". If it can't split a request cleanly, it asks for one change at a time and changes nothing.

Ask a question

Questions are answered straight away, with no card to apply:

  • "Which paddocks are missing a fungicide?"

  • "How much urea do we need?" or "What do we need to order?"

  • "Which paddocks have the highest N?"

  • "Why is Creek Flat different?" or "What still needs a decision?"

  • "Which paddocks have a plant-back problem?"

When the answer is a set of paddocks, select Select these N or Open in Compare. "What needs fixing in this plan?" is answered from Plan check, with Open Plan check. Price problems are only shown to people with the Financial records permission, and the answer says when they have been left out. A question is asked of the whole plan unless you say "these". "Why are these paddocks different?" compares them with the program most of that crop is on across the whole plan.

Work out what a change would cost first

Ask "How much would bringing all the canola up to 120 units of N cost?" or "What happens if we put these 400 hectares into canola instead?". Phase works it out on a copy, marked Worked out on a copy and "Your plan has not changed": cost, product needed against stock, season nutrients, the work that comes out, budgeted production, and what is yours to decide. Select Make this change to apply it to the plan, or Leave it.

Save an alternative. Open Saved task and alternatives at the top of the conversation. After a preview, name it under Alternative name and select Save alternative. Later, Revise what-if or Preview promotion builds a fresh preview against the plan as it is then; nothing is applied from a saved alternative without a new review. Saving needs the Financial records permission.

What Ask Phase won't do

  • Recommend a rate, a product or a crop-safety call, turn a growth stage into a date, or invent a yield. Ask Phase Agent for the evidence, then bring the rate or target back here.

  • Guess paddocks. A change with nothing selected and no paddocks named isn't guessed at; Phase asks. It won't guess "north of the creek" or "the heavy country" either: select them on the map, or name them.

How your words are handled. Most requests are read on your device and never leave it. Only wording Phase can't read is sent to a language model, which sees the sentence and the names it might refer to (paddocks, crops, products, passes), never rates, costs or the plan. It only turns your words into a request, which the Studio then checks, works out and previews like any other. If that service is unavailable, Ask Phase carries on with what it can read itself.

If something doesn't look right

  • "Save or cancel those edits first". A plan card has edits still open. Select Save changes or Cancel on that card, then ask again.

  • The card says the plan has changed. Something changed after the preview, so nothing was applied. Ask again to recalculate.

  • The reply says the last change "was not made through Ask Phase". Typing "undo that" only undoes Ask Phase's own last change. Use Undo in the top bar for other edits.

  • Apply is greyed out. Your role can view plans but not edit them.

Related

Did this answer your question?