Skip to main content

Add products and stock

Add a chemical, fertiliser, seed or part, then add stock to it with its quantity, unit and location.

P
Written by Phase Team

Add a chemical, fertiliser, seed, livestock item or part to Inventory once, then add stock to it each time a delivery arrives. You don't need a new product for each delivery. Part-full drums and shuttles (IBCs) are counted as what is really in them.

Add a chemical

Add chemical asks one question at a time, in a card at the foot of the screen (the whole screen on a phone), in the order the drum in your hand answers them.

  1. Open Inventory → Chemicals and select Add chemical (Add on a phone).

  2. What came in? The chemicals you already have are listed first, with what is on hand, under Yours: tap one to add stock to it. Tap one of yours to add stock to it, so no second copy is made. For a new one:

    • Scan the label: photograph the front of one drum. Phase reads the name, actives, group and APVMA number.

    • Upload the invoice: add every product on a supplier invoice at once. See Import a supplier invoice or statement.

    • Or type its name under Or type its name. Matches come from your products, then the Phase library.

  3. Is this it? Check what Phase has: kind, actives, group, brand, APVMA number, usual rate, and whether a label and SDS are on file. Select Change to correct any of it, or Find the label and SDS online. Typing an active suggests it at the strengths it is sold at, and an empty group can be filled from its actives. More details holds the usual rate, the unit it is counted in, label and SDS links, photos, usual supplier, list price, reorder level, barcode, other names and a note. Nothing on hand yet? Tap None on hand yet? Add the chemical only to go straight to the check.

  4. How much came in? Pick the size of a full drum (or Other), set how many, and answer Are they all full? (see "Enter part-full drums and shuttles" below).

  5. Batch and expiry (optional): Scan batch barcode or Photo of batch sticker reads them off the drum. More than one batch splits the drums between batches. Or tap Skip.

  6. Where is it kept? It starts on the shed most of your chemicals are in. Somewhere new adds a place by name.

  7. What did it cost? (optional, ex GST): per litre or per drum, the Supplier and the day.

  8. Check the card, then select Add chemical.

If you already have that chemical, the check card says so and offers to add the stock to that one instead; the button then reads Add as new anyway. A price that looks like a price per kL is named on the price step, with the likely per-litre price one tap away, and the button reads Record anyway.

A stock list from your previous system goes in through Actions → Import stock levels. See Import stock levels from your previous system.

Add a fertiliser, seed, livestock item or part

  1. Open Inventory and the section the product belongs in, such as Fertiliser.

  2. Select the Add button: Add fertiliser, Add seed or Add livestock item (Add on a phone). Identify product opens.

  3. Choose how to start:

    • Scan product label: photograph the front label. The label decides the product's type.

    • Upload invoice: add every product on a supplier invoice at once. See Import a supplier invoice or statement.

    • Import a stock list: bring products and opening stock across from a spreadsheet or your previous system. See Import stock levels from your previous system.

    • Or search by name, alias or brand: matches come from your products and the Phase library. Picking one marked Your product goes straight to Add stock, so no duplicate is made. Picking a Phase library product (Use) fills in its details. Matches in other sections sit behind a line such as "2 matches in other sections: show them".

    • Enter details manually. After typing a name with no match, the button reads, for example, Add "Urea" as a new fertiliser.

  4. Check the details. If Possible existing products appears, open the one you already have instead.

  5. If stock is already in the shed, fill in Quantity on hand, its cost and Stored at under Stock on hand (a location is needed once you enter a quantity).

  6. Select Add product.

Parts & other works differently: Add item opens Add part or fluid straight away, and the part also shows in Machinery → Parts. Bought several parts on one invoice? Add from an invoice, under Type, adds every part on it at once.

Save a chemical while in Fertiliser and Inventory moves to its section and says so: "Glyphosate 450 is in Chemicals".

More details on the form holds the default rate and unit, Storage & ordering (default location, Reorder level, supplier and List price), label and SDS links, and photos. Edit on any product, chemicals included, opens this full form.

Add stock to a chemical

Add stock on a chemical asks the same questions as Add chemical, one at a time.

  1. Open the chemical and select Add stock. Or use Actions (••• on a phone) → Add stock: it first asks Stock of what?, listing your chemicals with what is on hand first.

  2. How much came in? The size of a full drum, how many, and Are they all full?. What is on hand already shows beside the product's name.

  3. Batch and expiry (optional): Scan batch barcode, Photo of batch sticker, More than one batch, or Skip.

  4. Where is it kept? It starts on the shed that product already sits in.

  5. What did it cost? Per litre or per drum, the Supplier and the day. More details holds a Note and lot photo links.

  6. The check shows what Phase has On hand now and After. Select Add stock.

Add stock to other products

  1. Open the product and select Add stock. Or use Actions (••• on a phone) → Add stock and pick the product. The list starts on this section's products; All types shows the rest, and Change picks another.

  2. Enter the Quantity.

  3. Enter the cost, for example Cost per kg ex GST ($): the price per unit the lot is counted in.

  4. Choose a Storage location (you can't save without one). Not listed? Choose + Create new storage location and type its name.

  5. Add the Supplier, Purchase date, batch number and expiry date if you have them. For seed, Thousand grain weight (g) and Germination (%) let Crop Plan Studio sow to plants per square metre.

  6. Select Add stock.

The unit follows the product. The amount box uses the product's own unit, so a granule or powder (WG, WDG, DF, SG, WP, or actives in g/kg) goes in as kg, not litres. The unit you see is the unit the stock is saved in.

Add a batch number later. Open the product's Stock lots, tap the pencil on a lot (Edit stock lot), and use Scan batch barcode or Photo of batch sticker under Batch number to read it off the drum.

Enter part-full drums and shuttles

A chemical's How much came in? asks drum by drum:

  1. Under A full drum holds, pick what one holds when full: 1, 5, 10, 20, 110 or 1,000 L, or Other to type it. Keep it at the full size even when one is part-used.

  2. Set how many with One more and One fewer, or type the number.

  3. Under Are they all full?, choose All full or Some aren't (Full or Not full for one drum).

  4. For each part-full drum, type what is really in it. It's full puts one back with the full ones, and Another part-full drum adds one. For one and a half shuttles, choose 2 shuttles of 1,000 L, then Some aren't, and type 500 for the part-full one.

The litres saved are what is on the shelf, not what the labels hold. Each part-full drum is saved as its own stock lot, marked part-full, and keeps its batch. More details on this step has Counted in (Litres or Kilograms), Whose is it (Ours or On consignment) and Type the litres on the shelf instead for one total.

Mark stock that belongs to the supplier

For stock a reseller still owns until it's used, tick Consignment stock in Add stock and fill in Owned by, so an agronomist or reseller on Phase Advisor can track it. For a chemical, it is under More details on How much came in?: Whose is it → On consignment, and type whose it is. To fix a lot saved the wrong way, select Edit lot on the lot. See Your adviser price list, client products and consignment stock.

Fix units that don't add up

Each product row shows its stock with a coloured dot, and a label when it needs a look: Low, Critical (less than half of what the plans need), Empty or Check units.

Check units means Phase can't add the stock up, for example 2.6 L of a granular herbicide counted in kg, a granule set up in litres, or some lots in kg and some in L. A line above the list names every product like this ("2 products have units that don't add up"). Tap a name to open it, and the Check the units box offers the fix:

  • Make it 2.6 kg changes one stray lot to the product's unit.

  • Count it in kg changes the product's own unit, for a granule set up in litres.

  • Edit lot opens the lot for anything else. A lot that already has use recorded in the old unit goes here, so the lot and its use change together.

Only the unit label changes; quantities and prices stay as typed. You can also change the unit under Edit → Default unit. If a Phase library product arrives with the wrong unit, tell support.

Correct stock that's wrong or below zero

  1. Open the product and select Use / adjust.

  2. Under What happened?, choose Stocktake correction.

  3. In Quantity, enter the difference from what Phase shows. Put a minus in front to take stock off (-200 takes 200 off).

  4. Select Save movement.

There's no button to reset every product to zero; for many products, contact support. Before importing current stock, correct the old balances: Import stock levels adds opening lots, it doesn't replace them. To count a whole shed, see Set up storage locations and do a stocktake.

Invoice import dates each lot by the invoice date, which you can fix on each line before importing. A lot already saved with the wrong date, such as an invoice read with day and month swapped, is fixed with Edit lot → Purchase date.

Check a fertiliser's analysis

The nutrient kg/ha on your plans comes from the product's analysis. If a plan shows the wrong amount, open the fertiliser, select Edit and check Nutrient analysis (%) (elemental percentages). Look for a figure 10 times too high or low.

A liquid fertiliser also needs Liquid: how the label states it:

  • Analysis is: % w/w: kg in every 100 kg or % w/v: kg in every 100 L.

  • Density (kg/L): needed for a w/w analysis.

One liquid can read both ways: UAN is 32% N by weight (w/w), which is 42.2% N by volume (w/v) at 1.32 kg/L. Don't type 42.2 over a w/w analysis, or the N is overstated. Until the basis is recorded, plans read the analysis as w/v and say so.

Set up a feed supplement fed in a ration

A livestock supply fed in a ration, such as a buffer or lime in 20 kg bags or an oil kept in litres, comes off stock each time the ration is fed. A feed-out is weighed in kg, so Phase needs to know what a bag or a litre weighs.

  1. Open Inventory → Livestock, open the livestock supply and select Edit.

  2. Fill in Bag or drum size and its unit, for a product counted in bags, drums or units. (Most bagged products already have one from when they were added.)

  3. For a liquid kept in litres, check Weight per litre (kg/L), beside Default unit. Leave it blank for a vegetable oil, molasses or glycerine: the box shows the figure Phase uses, such as "0.92, typical for vegetable oil". Type your own only for a blend that weighs differently.

  4. Select Save changes.

The next feed-out takes it off stock by that size or weight, in the unit the stock came in (bags stay bags). With a bag size by weight, the product shows what the bags hold beside the count, such as "27 bags · 675 kg". A new livestock supply added with stock in bags is counted in bags. In the ration, pick the product for each line, or it never comes off stock. See Feed a mob in the paddock or put hay into a pen.

If something doesn't look right

  • Add stock is greyed out. Choose a product, enter an amount and choose a Storage location.

  • Stock reads below zero. Use was recorded before the stock was entered. Add the delivery, or make a Stocktake correction.

Related

Did this answer your question?