Storage locations are the places your products are kept: chemical sheds, fertiliser sheds, bins and tanks, fuel tanks, IBCs, workshops and drum areas. Use this article to add them, put them on the map, move stock between them and count what is in them.
The quick answers.
Move stock from one shed to another: open the shed it is in and select Move products beside what is stored there. Tick everything that is going, pick where it goes, and it moves in one go (steps below). One record takes each product out of one shed and puts it in the other.
Delete a location: open it and select Delete at the bottom. Phase won't delete one that still holds stock. There is no bulk delete, and you don't need to delete locations to start using Phase tags.
Where to find it
On a computer: Inventory → Locations.
On a phone: tap Inventory in the bottom bar, tap the section name at the top of the page and choose Locations.
Locations shows as Cards or on a Map, with filters such as Chem sheds, Tanks and Missing SDS. Silos, grain sheds and hay stacks live in Inventory → Grain & Hay. Water tanks, troughs, dams and bores live in Inventory → Water (also Livestock → Water).
Add a storage location
Select Add location.
Type a Name, such as "Main chemical shed".
Choose the Farm.
Choose the Type: Chemical shed, Fertiliser shed, Fertiliser tank, Fertiliser bin, Fuel tank, IBC, Workshop, Empty drums, Waste oil, General shed or Other.
For a Fuel tank, choose its Fuel (Diesel, Petrol or AdBlue) and tick It moves for a fuel trailer, tanker or ute tank.
Enter the Capacity if you want tanks and bins to show how full they are.
Set the Map pin: stand next to it and select Use my location, choose Type coordinates, or place it on the map after saving.
Select Add location. To add several sheds, tanks or IBCs, use Save and add another: it keeps the type, farm and capacity and moves the number on ("IBC 2" becomes "IBC 3").
Fuel tank fill-ups, transfers and dips are recorded in Inventory → Fuel (see Keep the fuel book: tanks, fill-ups and dips).
Change or delete a location
Tap a location's card, or Open options on its map pin. At the bottom of its screen are Edit location, Place on map (Move map pin once it has one) and Delete.
Delete asks first: the location, its checklist and files are removed, past stock movements keep their history, and a Phase tag on it is left needing a new home. Select Delete location to confirm. This can't be undone.
If it still holds stock, Phase says so: move or use the products kept there first, then delete it.
If an older location shows No farm selected, select Edit location and choose the farm once.
Put a shed or tank in the right spot on the map
Open the location and select Place on map (or Move map pin). Phase opens the farm map with a banner, "Tap the map to place" and the location's name.
Tap where the shed or tank really stands. The pin moves there and Phase takes you back to where you started.
On the Map itself, a storage pin's card has Move pin beside Edit, which does the same without leaving the map.
Edit on a map pin's card changes the location's name, type, capacity and notes.
A shed or workshop holding several lots shows Stored here. Saving never changes the stock.
A tank holding one product has Active product. Clearing it, or setting it to zero, asks "Remove [product] from [location]?", and saving deletes that stock from Inventory. If it was used, sold or moved, record that in Inventory instead so its history is kept. Choosing a different product asks first, and the stock keeps its cost, supplier and batch.
A location's screen
Opening a location shows the same screen as scanning the Phase tag on it.
A chemical shed or store has Add product and Stock out at the top, with Stock in, Count stock and Safety sheets under them.
A fuel tank shows how full it is against its capacity, with Fill a machine and Delivery at the top, and Dip reading, Add product and Safety sheets under them, plus Fuel log for this tank.
An IBC or fertiliser bin has Record draw and Delivery at the top, with the same three under them.
Stock in, Stock out, Count stock, Delivery and Dip reading ask one question at a time: which product, how much (in the unit the product is kept in there, with what Phase has and what it will be after), then the day and a note, and a check before Save. The product list starts with what is in the shed and how much. Taking out more than Phase has, or a count far below it, is named on the box and the button reads Record anyway. More details opens the rest in place, such as recording drums or bags rather than litres. Changing a movement already recorded still opens the full form.
A fuel tank holds only fuel. Only fuel can be stored in a fuel tank, and only fuel counts in its level and fuel log. A product recorded in a fuel tank before this keeps it until you change it: the tank's screen says how many products recorded there are not fuel, with Move them to a shed or store.
Under those are In an emergency (the emergency contact with Call, spill kit, fire extinguisher, first aid, muster point and nearest water) and what is stored there. Tap a product to change its name, label or safety data sheet. Safety sheets lists the SDS for everything stored there, with Add SDS where one is missing.
Records and checks holds everything else recorded against the location. Each one opens in place, with Back to the location at the top:
Movements: stock in, stock out, moves to another location and drum returns
Stocktake / check: a physical count or storage check
Storage checks: checklist items, photos and evidence
Documents & photos: SDS, receipts, dockets and storage photos
Safety & access: emergency contacts, spill kit, access notes and the check reminder
Fumigation
History: saved checks, edits and the movement log
Details lists the type, farm, capacity, map pin, and the last and next check dates. At the bottom is the location's Phase tag.
Only people who can edit Inventory see the edit pencils, Edit on the emergency details and the controls to put on or move a tag. Everyone else sees what is there and where each tag has been.
Move stock to another location
Several products at once. People who can edit Inventory see Move products beside the list of what is stored in a shed, store or tank (in Inventory → Locations, or on its Phase tag).
Select Move products.
What is moving? Tick the products, or Tick all. Everything of each ticked product moves.
Where are they going? Pick a place under Move to (only places that suit all of them are offered), or A new place: name it and say What it is.
When did they move? Check the day, then the check card, and select Move with the count, such as Move 3 products. The message that follows has Undo.
Part of one product. Use the location's movements form:
Open the location the stock is in now.
Choose Records and checks → Movements.
Set Movement type to Move to another location.
Choose the Product/item.
Choose the To location. Only places that suit the product are offered: a chemical is never offered a grain silo.
Enter the Quantity and check the Unit. Under the quantity, Phase shows how much is there now.
Select Move stock.
Don't record a separate stock out and stock in. (Older movement notes from before moves between locations existed stay as notes and don't change stock.)
Count stock and correct it
There are three ways to count, and they do different things.
Count stock (or Dip reading on a tank) changes the figures. Use it when the shed holds a different amount from what Phase shows.
Open the location and select Count stock (on a tank, Dip reading).
Choose the product.
Enter what is really there in Counted now (on a tank, Litres in the tank now).
Select Save. Phase sets the product to your count and records the difference.
Records and checks → Stocktake / check records a signed-off check. On a chemical shed it is headed Start chemical stocktake; elsewhere Record storage check.
Open the location and choose Records and checks → Stocktake / check.
Work down the list. Each product shows what Phase expects.
Leave a product on Correct, or type the counted quantity (it changes to Edited) and add a variance note. Mark all correct sets every row back.
Add Check notes / sign off.
Select Complete chemical stocktake (or Save stocktake).
This saves a dated record, marks the location as checked and sets the next check date. It does not change stock on hand. Fix any differences with Count stock or a stocktake correction.
A stocktake correction from Inventory fixes one product's balance: Actions → Use / adjust, then Stocktake correction under What happened?. Enter the difference from the book; if the shed holds less than Phase shows, put a minus in front (-200 takes 200 off).
Find what is in one shed
In a product section, such as Inventory → Chemicals, choose Filter beside the search box and pick a Location (in Parts & other you can also filter by Machine). Tap the chip under the search box to clear it.
Storage QR codes and Phase tags
Locations no longer have their own storage QR code, and a location without one no longer counts towards Need review. A Phase tag replaces it. Storage QR sheets already printed and stuck on a shed door still open a read-only page of what is stored there, without signing in. New locations don't get one.
Phase tags are under More → Daily work → Phase tags, or scan a tag with your phone.
To tag a location you already have, open it, go to Phase tag at the bottom and select Scan the tag. There's no need to delete and re-add locations. If a tag opens the wrong shed or tank, scan it, tap the ••• at the top and choose Move it to something else. See Put Phase tags on sheds, silos, tanks and machines.
If stock looks wrong
Check:
Whether the stock is split across more than one location
Recent stock movements
Invoice imports
Deductions from completed John Deere work in Reconcile (More → Daily work → Work reconcile → John Deere)
Stocktake corrections made by hand
The product's unit, especially L, kg, t and pack sizes
Correct a wrong quantity with Count stock or a stocktake correction, rather than making a new product. If labels or SDS links are missing, open the product and check it is matched to the right Phase library product (see Find a product's label and safety data sheet).
