Skip to main content

Plan truck runs

Plan and book each truck run on the Yield Centre's Loads calendar so drivers know what to cart, from where and to where.

P
Written by Phase Team

Plan each truck run before it happens, so drivers know what to cart, from where, to where and when, and mark it Booked once the carrier confirms it. Runs sit on a calendar beside the loads already carted. When the truck is loaded, the run turns into the real load with one tap. If you never plan runs, nothing else changes.

Where is trucking? More → Daily work → Trucking opens the truck run calendar straight away. It is the Yield Centre's Loads → Calendar (More → Paddocks & crops → Yield Centre → Loads, then Calendar), and Loads & trucking in Inventory → Grain & Hay opens it too. Searching More for "truck", "booking", "driver", "carrier" or "freight" finds Trucking.

Before you start

  • Everyone who can open the Yield Centre can see the calendar.

  • Planning a run needs permission to edit Inventory. Without it there is no Plan a truck run on the calendar, and Record load and Actions → Plan a truck run are greyed out.

  • Runs are kept in Phase only. They aren't sent to any other calendar, and drivers aren't sent a notification about them.

Open the calendar

  1. Open More → Daily work → Trucking, or the Yield Centre's Loads and choose Calendar. The month shows each day's loads, how many and the tonnes, and its truck runs.

  2. Tap a day to list its truck runs and loads under the month.

The buttons beside the month move it back or forward, and Today comes back to this month. The bar over the list (All loads, Needs a look, Delivered and so on) and Filter narrow the loads on the calendar too.

Plan a run

A new run opens as one card at the foot of the screen, one question at a time. Each step's Next says where it goes, and the arrow at the top left goes back.

  1. Select Plan a truck run above the month (it plans for the day you have tapped), Record load → A truck still to come, Actions → Plan a truck run, or Plan a run on the Overview's Trucking card. To plan a run for one contract, open the contract and select Plan a run. The run starts with that contract; Back to the kind of run still lets you make it Paddock to buyer.

  2. What run: tap the kind of run. The card says what each one is:

    • Load out: from a silo or stack to a buyer or receival site.

    • Into storage: from a paddock into a silo or stack.

    • Paddock to buyer: from a paddock straight to a buyer or receival site.

    • From a supplier: bought in, from a supplier into a silo or stack.

  3. Where: tap where it picks up (Pick up from for a silo or stack, Off the paddock for a paddock, or Collect from (the supplier)), then where it drops off (Drop off into a silo or stack, or Drop off at (buyer or site)). For a delivery, choose the Contract it is for: each open contract shows what is still to deliver, Looks like … puts the run on the likely one in a tap, and New contract… adds one. A load out run can pick up from a silo that is still empty (the full ones are listed first).

  4. When: tap or slide the strip of days, or Pick from a calendar for a day further off (up to a year ahead). Add a Time if it matters (Any time clears it). Under Booking, choose Planned, or Booked if the carrier has already confirmed it.

  5. The load: type or tap What (such as "Wheat APW1" or "oaten hay") and About how many tonnes with − and +. On the weighbridge (optional) takes the truck's Gross, Tare and Net: type any two and the third is worked out, and the net becomes the run's tonnes.

  6. Truck and driver: tap one of your trucks or team, or type a rego or name, such as a contractor's truck or a contract carter. Add Collection notes and Delivery notes. They are kept apart, so the loader and the driver each see their own.

  7. Check: read the ticket, then select Save run (Save booking when it is booked), or Plan another, which saves it and starts the next truck at When with everything else kept.

A day can hold as many runs as you like. A run needs a day, and either a pick-up, a drop-off or a contract.

Trucks and drivers to tap. Your machines with the type Truck show with their rego. People on the farm's team who have joined Phase show as drivers. Names and regos you have typed before show too, so the second run is a tap.

The Trucking card on the Overview

Overview → Customise → Widgets → Trucking adds a card of the runs still to do, soonest first, each with its pick-up → drop-off, day and time, Planned or Booked, and what it carries. A run whose day has passed without its load being logged comes first and starts with "Not logged". Tap a run to open it, Plan a run to plan one (for anyone who can log loads), or Open for the calendar. It shows up to six runs on a computer and three on a phone. A farm that already plans runs gets the card once, beside the stock card; it can be moved or hidden like any other.

Mark a run as booked

A run is Planned until the carrier confirms it.

  1. Tap the run on the calendar.

  2. Under Booking, tap Booked. Tap Planned to take it back.

A booked run is still a run to do. It stays on the calendar until the load is logged, shows on the notice board's calendar, and shows under Coming up on the farm on the Overview's notice board card as "Truck booked". Log the load works the same.

Copy a run to another day

  1. Open the run.

  2. Under Repeat on another day, select Choose a day.

  3. Set the date under Copy this run to.

  4. Select Copy the run.

Read the calendar

  • Each day shows its loads (such as "3 loads, 96 t"), its planned runs with a truck mark, and its booked runs with a calendar-tick mark and the word "booked", so the two read differently without relying on colour.

  • Tap a day to see its runs, each with its time, kind and route, and its state in words: Planned, Booked, Done or Cancelled. Its loads are listed under the runs.

  • The calendar shows a month at a time. There is no filter for one driver's runs. A run's weights show on it, such as "Gross 42.56 t · tare 14.5 t · net 28.06 t".

Print the truck runs

  1. On the calendar, tap a day in the week you want (for a month, any day of it).

  2. Select Print, beside Plan a truck run.

  3. Choose The week, with its dates, or The month. Phase opens a printable list, day by day: each run's time, Planned, Booked or Done, the grain and tonnes, where from and to, the truck and driver, the contract and the collection and delivery notes. Cancelled runs are left off.

  4. Print it, or save it as a PDF from the print window.

Change, cancel or delete a run

Open a run to see everything on it, including both sets of notes and what it became.

  • Change opens Change the run, everything on one page, From a supplier and the weights included.

  • Cancel run (on a planned or booked run) keeps it on the calendar as Cancelled. Put back on brings it back.

  • Delete, then Delete run, takes it off the calendar. If the run already became a load, the load stays in Storage → Activity; only the plan goes.

Turn a run into the load

  1. When the truck is loaded, open the run and select Log the load. The full Load out or Load in form opens on Check and save, filled in from the run: the silo or paddock, the buyer or site, the contract, the tonnes and weights, the day, the truck, the driver and the notes. A run From a supplier opens Load in as Bought in from that supplier, into that silo.

  2. To read the docket, tap Photo or Photo or PDF under Read it off the docket, at the top of Check and save. On a run planned on the loaders' estimate, the docket's net goes into Delivered tonnes (net) and the estimate stays beside it, so the load saves already weighed off.

  3. Check every figure, then select Save load.

The run then reads Done with what the load became, such as "awaiting weigh-off" or "turned away: too wet". Open the load takes you to it. A run planned on a contract as "Barley BAR1" logs as Barley with BAR1 as the Grade, so the farm's deliveries stay on one grain.

A load logged some other way ticks its run off. If the driver logs the load with Load in, a docket photo or a silo's tag instead, Phase ties it to the one run it clearly is (the same day, with the person logging it as the run's driver or the same drop-off) and says, for example, "Ticked off the 08:30 run to the port". The run reads Done, and the load takes the run's contract, truck and driver where it had none. If two runs fit equally, Phase ties neither.

Good to know

  • Delete the load a run became and the run goes back to Planned.

  • Log the load is only on a planned or booked run. Put a cancelled run back on first.

  • Contract it is for only shows once the farm has a contract, or you can add one.

  • A run planned for a day still to come is logged with today's date.

  • An open contract shows how many runs and tonnes are planned against it, such as "3 truck runs planned · 90 t". Booked runs count too.

  • Hay counted in bales has no truck weights.

If something doesn't look right

  • I can't find Trucking. It is More → Daily work → Trucking, the same calendar as the Yield Centre's Loads → Calendar. Every run you planned is there.

  • There's no Plan a truck run button. You don't have permission to edit Inventory. Ask the farm owner.

  • My truck isn't in the choices. Add it as a machine with the type Truck (see Add and organise machines and tools), or type its rego.

  • A driver isn't in the choices. Only people who have joined the farm in Phase show. Type their name instead.

  • Next stays greyed out. The step says what it needs: a day, and a pick-up, a drop-off or a contract. A time must be hours and minutes, like 07:30.

  • The run still says Planned after the load went. The load was logged against a different day or drop-off, or two runs fitted. Open the run and select Log the load, or open the load and check its date.

Related

Did this answer your question?