Skip to main content
All CollectionsPlugzio ManagerPlugzio Manager Dashboard
How To Set Up "Single User Auto-start"
How To Set Up "Single User Auto-start"

Step-by-step guide on how a manager can set up and configure single user devices to automatically start sessions

Florian Remi avatar
Written by Florian Remi
Updated over a week ago

What is "Single User Auto-start"?

The use case for this feature is when the Plugzio device is installed at an assigned parking spot where no one except the assigned person has access to that spot. By activating this feature on your device, the assigned user will not need to activate the device by scanning the QR code or entering the device ID every time they want to charge their vehicle with your Plugzio device. This means that they can start charging only by plugging in and all the usage data on your management dashboard will be saved under their name.

Important Note: Since the activation steps are removed when this feature is active, you need to make sure that no one else has access to the Plugzio device to prevent unwanted people from using the device.

Initial Requirements

  • This article assumes that you have a Plugzio Management account with a Plugzio device registered. If you have not created a management account, please follow the Manager - Registration & Get Started guide.

  • This article assumes that the Plugzio device that you want to configure is powered on, connected to the internet, and has an active cloud subscription.
    - If you have issues with your device, please contact customer support at customercare@parkizio.com.

Steps

  • There are a few requirements to allow Single User Auto-Start to on your Plugzio device:
    - Payment plan assigned to the user has the "Auto-Start Sessions For Single User" enabled.
    - Plugzio device is configured to Smart mode with private access settings.
    - Plugzio device has no more than a single user added to the access list.

Step 1 - Enabling single user auto-start on the payment plan

  • Navigate to the "Payment Plan" page

  • Select and edit the payment plan that you would like the to be on user

  • Make sure that the "Single User Auto Start" option is enabled

Step 2 - Setting the device to Smart mode with private access

  • Navigate to the "Device Management" page

  • Find the Plugzio device you would like to configure

  • Click on the "Power Setting" button on the tile and set the device to "SMART" mode.
    - If the device is in always off mode the button will say "ALWAYS OFF"
    - If the device is in always on mode the button will say "ALWAYS ON"
    - If the device is in smart mode the button will say "SMART"
    - If the device is in Bluetooth mode the button will say "BLUETOOTH"

  • Once the device is in smart mode, click the access setting button next to the "Power Setting" button and change the access setting to "PRIVATE".

Step 3 - Add a single user to the access list

  • Once it is in smart mode with private access, click the tile to expand the user list and make sure that there is only 1 user added to this list.
    - Users can be added to the list using the "ADD USER" button
    - Users can be removed from the list using the "X" button next to the user

  • When adding a user, select the payment plan you edited in step 1

  • Once the user is added verify that a "on/off" icon is present next to the payment plan.

  • This icon indicates that the single user auto-start feature is available to the user. If this icon is not present, please make sure all the above steps are done correctly.

Did this answer your question?