For WiFi installations, we can supply you with a Plugzio Extender that is pre-configured with a network that the Plugzio device automatically connects to upon power on. This significantly reduces the amount of work required after installation to connect Plugzio devices to a WiFi network.

We use TP-link outdoor extenders (Access Point), here is what's included in the box:

Note: Cat5 cable is NOT included in the box. The installer needs to provide the cat5 cable at a length required for the specific installation.

The POE adapter provides the extender with power and internet connectivity via Cat5/6 cables.

Note: Make sure to use Cat6 cable for longer runs

Note: You cannot use any other POE switch to power on the Extender. The POE adapter that comes with the device (picture above) is the only way to power the extender.

For optimal performance, Ethernet cable connected to the device should not exceed 330 feet (100 m).

For longer runs, you can use a Plugzio Switch to extend the length of the cable. Learn more: What is included with the Plugzio Switch?

For better coverage, be sure to position the antennas at a 45° angle

Need help with anything else? Contact the Plugzio customer care team to have a chat with one of the specialists and discuss your concerns.