Open your diffuser on the Diffusers overview. You'll see its photo, the on/off button, and on the Smart Aroma Diffuser 2 and Pro also the ambient light button, and below that three sections: Schedule, Intensity and Scent.
New ScentPod in
Tap Scent and then New ScentPod in. Choose the scent; the fill level is then set to full. If you're logged in, your ordered scents appear at the top.
Didn't choose a scent when adding your diffuser? Then Choose your scent appears on the overview. Tap it.
Adjusting the fill level
The app estimates how full your pod is based on your schedule and intensity. It's an estimate, not a measurement. If it's not right, tap How full is it? under Scent and choose Full, Three quarters, Half, Quarter or Almost empty. If it's almost empty, a button appears to reorder the same scent.
Name and room
Tap the gear icon at the top right of the diffuser page.
Name: the name you see on the overview. Renaming also works without a connection.
Room: determines the room photo and which intensity the app recommends for you.
Product and Firmware: the model and firmware version of your diffuser. Handy if you contact us.
Sync clock
Under Help on the same page. The schedule follows the diffuser's clock; after tapping this, it's set to match your phone.
Smart Aroma Diffuser only: spray interval and output
On the original Smart Aroma Diffuser, under Spraying, there are two extra settings: the interval in minutes when there's no schedule, and the amount per spray. For most people, the default values are fine.
Forgetting a diffuser
At the bottom of the settings page is Forget this device. The diffuser keeps running on its current schedule; only your phone forgets it. If you want to control it again later, add it again via Add diffuser.