Setting up your braille display with JAWS
Follow these steps to set up your braille display with JAWS.
Navigate to the JAWS window and open the Options menu with the command Alt+O
Arrow down and press enter on the option âBrailleâ
Press Tab until you hear the button âAdd a Braille Displayâ and activate it
Select your braille display model from the list using the up and down arrow keys and then select the display youâd like to add by pressing space
Press Tab until you find the âFinishâ button and activate it
Press Tab until you hear the âOkayâ button and activate it
Restart JAWS
Your braille display should now be outputting content from your computer.
Tip: JAWS has various modes to output content to your braille display. It can mimic what the speech synthesizer says, navigate structurally on its own, or go line by line. No option is better than the otherâitâs up to you! You can change these modes by navigating to the JAWS window, pressing Alt+U, and then pressing C to open the Settings Center.
You can also change the type of braille youâd like to receive by adjusting that option under âBrailleâ in the Settings Center.
Setting up your braille display with NVDA
NVDA has the ability to automatically detect a braille display. However, this does not work on all models. If your braille display is not automatically detected, try the steps below.
Press Ctrl + NVDA key + A to open the Braille Display Selector
Select your braille display from the available list
Press Tab until you hear âOkay Buttonâ and then press Enter
Tip: If you would like to change the navigation mode of your braille display, the type of braille it outputs, or other settings for your braille display in NVDA, navigate to the settings and choose the Braille category.
If you have any questions, click the Soomo Messenger button in the lower-right corner. You can also contact us using the information below.
(888) 240-0314
MondayâFriday 9 a.m.â9 p.m. ET
SaturdayâSunday 1 p.m.â9 p.m. ET
âsupport@soomolearning.com