Making a selection
Open a project and select the surfaces and edges you want to measure in the 3D viewer:
Click surfaces and edges directly in the model
Use Select at the top of the viewer to select the Roof (pitched, flat, chimney, soffits) or the Walls of a building in one click
Use Select all or Deselect all to tick or untick everything at once
As soon as you select something, the button in the top right of the viewer shows Selection with the number of selected items. Click it to view your selection in full screen.
What you see
The panel on the right groups your selection per building (e.g. Building 1, Building 2). For each building you see:
The total area (m²) and total edge length (m)
Per roof section (e.g. Pitched Roof, Flat 1, Soffits, Parapet 1) the surface areas (m²) and the edges, such as gutters, ridges, flashings, perimeters and rakes (m)
At the bottom of the panel, the total of your whole selection
Click the arrow in front of a row to expand or collapse it.
Editing the selection
Use the bin icon next to a row to remove that item from your selection. To add or remove items, click surfaces and edges directly in the model. Use Show to turn the labels for areas, distances, ridge heights and names on or off.
Creating a quote from your selection
Once your selection is complete, click Create quote on the project card on the left to start the configurator. The configurator uses the surfaces and edges in your selection to calculate quantities. See How the configurator works.
Exporting without creating a quote
Only need the measurements or the model? Click Export (download icon) in the toolbar:
Measurement Report — Download as PDF or Download as Excel
3D Model — Download as GLB or Download as SketchUp
See Measurement Reports for full details.


