In this article, L, W, and H refer to length, width, and height. Length is the dimension from left to right, width is the dimension from front to back, and height is the dimension from top to bottom. |
Networking Devices
Toast Router
The dimensions of a Toast router (without antennae) are:
6.5” L x 3.8” W x 1.5" H
16.5 cm L x 9.7 cm W x 3.8 cm H
Toast Switch
Toast offers different sizes of switches. The dimensions of a Toast switch are listed below:
From 7.7” L x 4.6” W x 1.4" H up to17.3” L x 8.6” W x 1.7" H
From 19.6 cm L x 11.7 cm W x 3.6 cm H up to 44 cm L x 21.9 cm W x 4.3 cm H
Wireless Access Point
Toast offers two different wireless access points (WAPs). The dimensions of both WAPs are listed below:
Indoor: 7.4" L x 7.4" W x 1.4" H
18.8 cm L x 18.8 cm W x 3.6 cm H
Outdoor: 12" L x 7" W x 2.4" H
30.5 cm L x 17.8 cm W x 6.1 cm H
Terminals and Handhelds
Toast Flex 3 Terminal
The dimensions of a Toast Flex 3 Terminal (with the stand) at its highest position are:
13.70" L x x 9.74" W x 7.25 H
34.80 cm L × 24.74 cm W × 18.42 cm H
Toast Flex 14"
The dimensions of a Toast Flex 14 (with the stand) at its highest position are:
16.7” L x 7.2” W x 9.8" H
34.7 cm L x 18.2 cm W x 25 cm H
Toast Flex 3 Guest Display
5.71" L x 4.18" W x 5.08" H
14.50 cm L × 10.62 cm W × 12.90 cm H
Toast recommends a clearance space around the terminal and guest display footprint for attaching other devices, cable routing, and a better user interaction.
Toast Flex for Guest
The dimensions of a Toast Flex for Guest when it's attached to a terminal (see the above image) are the same as a Toast Flex 14, but with an added width dimension:
16.7” L x 10.2” W x 9.8" H
34.7 cm L x 25.8 cm W x 25 cm H
The dimensions of a Toast Flex for Guest when it uses a wedge mount are:
8.1” L x 6.1” W x 3.1” H
20.5 cm L x 14.5 cm W x 8 cm H
Toast recommends leaving at least 2" (5 cm) around the guest-facing display for cable routing and a better guest experience.
Toast Flex for Kitchen (Toast Flex 22)
The dimensions of a Toast Flex for Kitchen (without the arm mount or stand) are:
20.6" L x 1.3” W x 12.6" H
52.4 cm L x 3.2 cm W x 31.9 cm H
Toast Go® 2
The dimensions of a Toast Go® 2 are:
7.9" L x 0.8" W x 3.7" H
20 cm L x 2 cm W x 9.5 cm H
Toast Go® 3
The dimensions of a Toast Go® 3 are:
7.44'' L x 3.54'' W x 1.37'' H
18.90 cm L × 8.99 cm W × 3.48 cm H
Toast Go® 3 Charging Dock
The dimensions of a Toast Go® 3 charging dock are:
5.12" L x 10.91" W x 3.35" H
13.0 cm L x 27.7 cm W × 8.5 cm H
Toast Printers
TP300 Toast Printing Hub
The dimensions of the TP300 Toast Printing Hub are:
5.32" (L) x 5.66" (W) x 9.74" (H)
13.51 cm (L) × 14.38 cm (W) × 24.74 cm (H)
Front Clearance: 4.33"
Side Clearance: 2"
TP200 Toast Receipt Printer
The dimensions of a TP200 Toast receipt printer are:
5.2" L x 5.5" W x 5.4" H
13 cm L x 13.9 cm W x 13.7 cm H
We recommend 2" (5 cm) of clearance in the back for cable routing and 4.2" (10.6 cm) of clearance in the front to open the paper compartment.
Toast Kitchen Printer
The dimensions of a Toast kitchen printer are:
6.3" L x 9.6" W x 6" H
16 cm W x 24.5 cm L × 15.4 cm H
Toast recommends 2" (5 cm) of clearance in the back for cable routing and 6" (14.5 cm) of clearance above the printer to open the paper compartment.
TLP400 Toast Label Printer
The dimensions of a TLP400 Toast label printer are:
8.1” L x 6.2” W x 6.3” H
20.6 cm L x 15.8 cm W x 16 cm H
Toast recommends 2" (5 cm) of clearance in the back for cable routing and 6" (14.5 cm) of clearance above the printer to open the paper compartment.
Card Readers for US Restaurants
Toast Tap™ On-Counter
The dimensions of a Toast Tap™ on-counter are:
3.2" L x 3.2" W x 1.8" H
8.2 cm L x 8.2 cm W x 4.6 cm W
Toast recommends at least 1" (2.5 cm) of clearance on either side so a guest can swipe their card.
Card Readers for Non-US Restaurants
S1 Handheld
The dimensions of an S1 handheld are:
6.6" L x 3" W x 1" H
16.8 cm L x 7.7 cm W x 2.54 cm H
P400
The dimensions of a P400 card reader are:
3.1" L x 6.6" W x 1.7" H
8 cm L x 16.7 cm W x 4.4 cm H
Toast POS Accessories
Brecknell 6710U Scale (U.S. only)
The dimensions of a Brecknell 6710U scale are:
10.5 " L x 10.5" W x 2.8" H
26.7 cm L x 26.7 cm W x 7.1 cm H
Toast recommends at least 2" (5.1 cm) of clearance in the back for cable routing.
CAS PD-II Scale (U.S. only)
The dimensions of a CAS PD-II scale are:
11" L x 15" W x 3.5" H
27.9 cm L x 38.1 cm W x 8.9 cm H
Zebra DS2208 Scanner
The dimensions of the Zebra DS2208 scanner (without the cradle) are
3.9" L x 2.6" W x 6.5" H
9.9 cm L x 6.6 cm W x 16.5 cm H
Zebra DS2278 Wireless Scanner
The dimensions of the Zebra DS2278 wireless scanner (without the cradle) are
3.5" L x 2.6" W x 6.9" H
9 cm L x 6.6 cm W x 17.5 cm H
Zebra DS9308 Scanner
The dimensions of the Zebra DS9308 scanner are
3.3" L x 3.4" W x 5.7" H
8.3 cm L x 8.6 cm W x 14.5 cm H
Toast Cash Drawer
The dimensions of a Toast cash drawer are:
16.1” L x 16.3” W x 4.4” H
41 cm L x 41.5 cm W x 11.3 cm H
We recommend a 12" (31.3 cm) clearance in front of the drawer to fully open it.