Skip to main content

Can I display a Tee's color Hole-by-Hole? (Combo Tee)

Updated over 4 months ago

This feature is available for the following products:

Q: We have a tee at our course that uses a combination of two tees. For example, holes 1, 2, 5, 6, 9 use the blue tee, and holes 3, 4, 7, and 8 use the white tee. How can I display a tee color hole-by-hole on the scorecard?

A: When editing a Tee in the Course Details, you can select the Combo Tee Colors option (as shown below).

To set a combo tee color, follow these directions:

  1. Go to the course details:

    1. From Customer Center: Customer Settings > Course Details.

    2. Within Event/League: Event/League > Course Details.

  2. Find the course with the tee and select "Edit."

  3. Click "Edit this Course." Note: If you are making changes to Par for any tee, you should select the option "Create and Edit Copy" to avoid impacting past results.

  4. Select the tee within the course.

  5. Check the option for "Combo Tee Colors" (as shown above).

  6. After selecting the combo tee color option, a pop-up is displayed where you will choose the two colors used and the holes that use the selected color (as shown below).

  7. Select the "Color 1" drop-down and use the color finder to select the appropriate color. Then, choose the holes that will use the selected color.

  8. Select the "Color 2" drop-down and use the color finder to select the appropriate color. Then, select the holes that will use the selected color.

  9. Click "Save."

  10. Make additional changes as necessary and click "Save" again to apply the changes to the course.

The tee will display two color codes (as shown below).

The two colors will also be displayed on the scorecard accordingly (as shown below).

Did this answer your question?