Skip to main content

BRS & G1 Pairings Pull

Updated over 4 months ago

This feature is only available with the following products:

If you use BRS or G1 for tee sheet management, you can pull a tee sheet from BRS/G1 into a tee sheet within a round of a league/event in our system.

In this article, we will discuss how to set up and use this integration.

Pulling Pairings from BRS and G1:

To pull pairings from a BRS/G1 tee sheet, follow these instructions:

  1. Contact our support team to enable the integration (if it has not yet been enabled).

  2. Set up the integration (if it has not been set up yet).

  3. Go to the event or league where you'd like to import.

  4. Go to Calendar > Link Rounds to BRS/G1.

  5. The rounds within the event/league will be listed (as shown below). On the right, link each round with the appropriate BRS/G1 event. If there is no event in BRS/G1 on the date of the round, there will be nothing to select.

  6. Click "Save" after the desired rounds are linked.

  7. Go to Rounds > Pull Pairings from BRS/G1 for the round where you'd like to import the pairings.

  8. Click "Import" to import the tee sheet from BRS/G1. If there were already pairings in the round, they will be overwritten with the new pairings in the import.

The tee sheet will then be imported with the tee times. The imported players will also be placed in the event/league roster and marked as "Confirmed" in the round roster.

To finalize the tee sheet in our system, you will have to set the Course/Tee by going to Rounds > Edit Existing Pairings.

To see the importing activity for a specific event/league, go to the Activity Log for that event/league.

Did this answer your question?