When Atlas has everything it needs for a build, it opens the Store Builder, full screen, and builds your page in front of you. A product page takes about two minutes, a full store a few more, and a pre-sell page a few minutes. When it's done, the page is saved as a draft in Pages, and a store or product page opens in the editor, ready to change with Atlas and publish. Nothing on your Shopify store changes until you publish, and leaving the Store Builder doesn't interrupt the build.
In this article:
How the Store Builder opens
The Store Builder opens as soon as your request on Home has everything a build needs, or when the build chat's last line says what it's building, for example “Building a product page for Aurora Lamp with the Atlas Default template, in English.”, with your product, template and language. See Starting a build from Home and Answering questions in the New build chat.
It also opens when you open a page from Pages, or from Recent work on Home.
While it loads, you see the Atlas emblem with a bar filling under it, and the browser tab reads “Store Builder · Atlas”. If your store's products can't load, you see “This page didn't load. Something went wrong on our end. You can try refreshing or head back home.”, with Try again (it reloads) and Go home.
The top bar
From left to right:
Element | What it does |
Back arrow | Tooltip “Back to your workspace”. Goes straight to Home, with no warning. A build in progress keeps going. |
Page name | The product's name (from a product link Atlas couldn't name, the site's name, for example AliExpress product), followed by what's being built: · Store, · Product page, · Listicle or · Advertorial. A long name is cut short: hover over it to read it all. Once the editor is ready, the name opens a menu with the whole name, the status and Published versions. |
Status | Generating while it builds, Draft · Not published once it's done, Published once you publish it. Not started means the build was refused for credits, and Failed that it stopped. The dot before it is gold while the page builds, grey for a draft, green once published and red for a failed build. |
Home / Product | Full stores only, once the build is done. Tooltips “Show the home page” and “Show the product page”. It starts on Product. |
Desktop and phone buttons | Tooltips “Preview on desktop” and “Preview on phone”. Phone shows the page at a phone's width, 390 px; desktop uses the full width of the canvas. You can switch at any time, even mid-build. |
Publish | Tooltip “Publish this page”. Shows once the page is finished, and opens the publish panel. It reads Import and edit in Shopify on a pre-sell page, and on a store or product page until its editor is ready. See How to publish a page to your store. |
The chat bubble for support doesn't show in the Store Builder. To reach support, go back to Home.
The Atlas Agent panel
On the right, under Atlas Agent, the panel shows the build chat that asked for the page, or the request you typed on Home. While you watch a build, a line under it says where the build stands:
When | Store or product page | Pre-sell page |
Building | “I’m building your page with the template you picked. Watch it come together here.” | “I’m writing your listicle with the template you picked. It takes a few minutes.”, with listicle or advertorial |
Done | “Your page is ready. It’s saved as a draft and isn’t published.” | Same |
Refused for credits | “This build didn’t start. The page says why, and what to do next.” | Same |
Failed | “This build stopped before it finished. You can try again from the page.” | “This page stopped before it was written.” |
Published | “This page is imported into your store.” | “This page is published on your store.” |
Then a list of steps, each ticked off as Atlas finishes it:
Store or product page: “Preparing your product”, “Writing your copy”, “Bringing the details together”, “Adding the finishing touches”.
Pre-sell page: “Reading your product”, “Writing your page”, “Adding the details”, “Putting your page together”.
When a pre-sell page is done, a last line says what's next: “Publish adds it to your store as a new page, in the theme you pick.” A store or product page says “It was built without a store. Connect your store, then publish it.” when no store is connected.
Once a store or product page is done, the panel is where you ask Atlas for changes to it. See Editing a page with Atlas. A pre-sell page's panel has no message box.
When you open a page again later, the panel shows the request that built it and the changes you've made, without the build's steps or the line about where it stands.
While a store or product page builds
The canvas starts with a grey placeholder. Then your template's page appears around your product, and the copy types itself in as Atlas writes it. On desktop the view travels down the page as each part is written; in the phone view it doesn't. Links on the page do nothing while it builds, and any picture that doesn't load is replaced with your product's photo.
At the bottom left, a pill shows progress: “Starting your build”, then the current step and a percentage, which never goes back down. If the build runs past 5 minutes, the pill shows “Taking longer than usual · still working”. The build hasn't failed: Atlas keeps checking it. See Why is my build taking so long?
If you built from a product link and Atlas couldn't read the product's picture, the placeholder stays until the page is written.
While a pre-sell page is written
Atlas writes a listicle or an advertorial in one go, so there's nothing to type in live. Instead, the template's own example page plays, with your product's photos in its pictures. The pill shows “Starting your page”, then the current step and a percentage. If the page takes more than 12 minutes, the pill shows “Taking longer than usual · still working”.
When the page is written, it fades in and its words type in quickly, then it stays on screen.
When the page is ready
The finished page replaces the building view, a few seconds after Atlas finishes. The status changes to Draft · Not published and Import and edit in Shopify appears. The page is saved in Pages as a draft: there's nothing to save yourself.
On a store or product page, the editor takes over a few seconds to a few minutes later: you can ask Atlas for changes, and the button reads Publish. See Editing a page with Atlas.
For a full store, the Home and Product switch shows either page. While the home page opens, the pill shows “Opening the home page”. If it can't open, you see “The home page didn’t open. Try again, or switch back to the product page.”, with Try again.
If a pre-sell page's preview doesn't load, you see “This page can’t open yet. Its preview didn’t load. Try again.”, with Try again.
If the build stops instead, you see “Generation failed”, with Try again and Back to Home. See Why did my build fail?
Leaving, reloading and coming back
Leaving: the back arrow takes you to Home, and the build keeps running on Atlas's servers. It shows in Pages as Generating, and as Draft once it's done.
Coming back to a store or product page: open it from Pages. While it's still building you see “This page can’t open yet. This page is still being built. It opens here as soon as it’s ready.” The page appears there when it's done; the live typing isn't shown again.
Coming back to a pre-sell page: it plays in as it's written, as it did the first time.
Reloading a store or product page mid-build: within 10 minutes of the start, in the same browser tab, a reload picks the same build up again. After that, a reload starts a new build, which uses credits again (3 for a full store, 2 for a product page), so open the page from Pages instead.
Reloading once the finished page is on screen, or reloading a pre-sell page: the same page opens again. Nothing is built twice.
If you open a store or product page whose build failed, you see “This page can’t open yet. This build didn’t finish, so there’s no page to open.” A pre-sell page whose build failed shows “Generation failed. Your page stopped before it was written.”, with Back to Home. A page that can't be shown for another reason shows “Couldn’t open the page. Try again.”, with Try again.
On a phone
On a phone or a narrow window, the Atlas Agent panel and the status are hidden, the page name drops what's being built, and Publish (or Import and edit in Shopify) shows only its upload icon. The desktop view uses the width of your screen, so to check the desktop layout, open the page on a computer.




