Some of our camera lens protectors (including iPhone 17 lens protectors) are made from tempered glass. While this offers excellent protection, glass can crack or shatter if removed incorrectly.
Important Safety Notice
Camera lens protectors are made of glass and can crack when force is applied. Follow the steps below carefully to avoid injury.
Before you begin
Wash and dry your hands
Work on a flat surface
Keep your face and eyes away from the phone during removal
Step 1: Cover the lens protector
Apply a layer of adhesive tape (clear tape or masking tape) directly over the lens protector. This holds the glass together if it cracks and prevents shards from scattering.
Step 2: Lift from the edge
Using your fingernail or a thin plastic tool (like a plastic card), gently lift one corner or edge. Do not press down on the centre of the glass.
Step 3: Peel slowly
Once an edge lifts, slowly peel the protector away in one direction. Keep the tape in place during removal.
Step 4: Dispose carefully
Wrap the removed lens protector (still taped) in paper or tissue before disposing of it safely.
What not to do
Do not bend or snap the glass
Do not apply force to the centre
Do not use metal tools or sharp objects
Do not remove near your face or eyes
If the glass cracks during removal
Stop immediately. Keep the tape in place. Carefully remove remaining pieces while covered and dispose of all glass safely. If you're uncomfortable, ask someone to help.
If you have any concerns about your lens protector, get in touch and we'll help.