In the Noise Meter's Mainboard Editor, you have granular control over the positioning of the meter towers through X and Y coordinates as well as anchor settings. The Y-axis controls vertical positioning (moving elements up or down), while the X-axis controls horizontal positioning (moving elements left or right). Be careful when adjusting these values, as setting them too high or low can move elements off-screen entirely. The anchor setting (left, center, or right) determines the reference point from which positioning is calculated. For example, setting the anchor to 'center' will position the element relative to the center of your display area. These controls work in conjunction with the mainboard margin percentages, so if you've already adjusted margins to fit a non-standard board size, you may need to fine-tune the individual element positions as well.
