Configuration requirements
EEVEE configuration package, containing the EVSE ID, an installer configuration manual and an owner registration manual
Zaptec installation guide
Zaptec portal: portal.zaptec.com
A laptop as configuration device
Follow the steps
Step 1: Go to the Zaptec portal at portal.zaptec.com.
Step 2: Log in with your Zaptec app credentials.
Step 3: Open Installations and select your installation.
Step 4: Click Settings and open the Authentication tab.
Step 5: Enable OCPP-J 1.6 authentication and turn on Authorization required to allow RFID authorization.
Step 6: Enter the EEVEE back office URL: wss://eevee-hvpq.powerfill.app/ws/{deviceId}
The {deviceId} placeholder is replaced automatically with the serial number of the charger, so you do not need to fill it in yourself.
Step 7: Save and reboot the charger. No password is required. After rebooting, the charger should connect to the EEVEE backend. Installers continue to Step 8. Owners continue to Step 9.
Step 8 (installers): Activate the charging station on the EEVEE platform: (TBD)
Step 9 (owners): Register the charging station in your EEVEE account: (TBD)
The charging station is now linked to your EEVEE account!