1- Power up the Thiamis with a DC power source 12V 1A. V+: Positive, GND: Negative.
You can power the Thiamis through the 3 pole, Euroblock connector or via either of the USB ports
2- Connect sensor(s) to the appropriate communication port(s) on the Thiamis: USB, RS232, SDI12, WiFi, Bluetooth, Zigbee, Analog and Digital I/O.
See our sensor specific guides to help you set up different sensors such as DustTraks or RAE senors.
3- Access your data directly on the Web on your mobile browser at https://environet.io.
If you own your devices, you may have to Activate and Configure your devices.
Devices rented from an equipment partner should already be configured and activated.
Next, check our comprehensive intro guide to using Environet.