Check out guides on how to physically set up your Thiamis, and how to generally add a sensor in Environet.
Below you'll see the process step by step for the EBAM (Environmental Beta-Attentuation Mass Monitor) series of sensors as well as tips for troubleshooting and understanding model specific features.
Setup Instructions:
Connect a 12V power supply to the 3 pole Euroblock connector or 5V power supply to either of the USB ports or Node enclosure's power port.
Plug the DIN connector cable into the EBAM's serial port on the bottom.
Connect the other end of the cable directly to the Thiamis 1000's RS-232 port.
Errors
When the EBAM is not reporting, check the configuration page or hover over the red status indicator for more information.
Timeout
The EBAM has not responded to the requests made by the Thiamis and has timed out. It will continue to attempt communication but you can run through the general Troubleshooting Sensors steps to address common problems.
Tips on Specific Models:
E-BAM
List of Supported Models:
Click on names for links to manufacturer user manuals.