Check out guides on how to physically set up your Thiamis, and how to generally add a sensor in Environet.
Below you'll see the process step by step for the ES-642 series of sensors as well as tips for troubleshooting and understanding model specific features.
Setup Instructions:
Connect a 12V power supply to the 3 pole Euroblock connector or 5V power supply to either of the USB ports or Node enclosure's power port.
Plug the DIN connector cable into the ES-642's serial port on the bottom.
Connect the other end of the cable directly to the Thiamis 1000's RS-232 port.
Errors
When the ES-642 is not reporting, check the configuration page or hover over the red status indicator for more information.
Timeout
The ES-642 has not responded to the requests made by the Thiamis and has timed out. It will continue to attempt communication but you can run through the general Troubleshooting Sensors steps to address common problems.
Tips on Specific Models:
ES-642
List of Supported Models:
Click on names for links to manufacturer user manuals.