If the Toccare Multi Loop panel is fitted with the TD571E main pcb, the straight through 9 pin serial lead should be used (see below):
This is also the firmware upgrade lead use for the Toccare MiniOne – all versions. If the Toccare Multi Loop panel has the TD571D main pcb, the correct firmware upgrade connections/ lead is shown below:
The loop cards for the Toccare Multi-loop require the below lead for upgrading the firmware.
Contact Information
For further assistance or if you have any questions regarding this procedure, please contact the Eurotech Technical Team:
Email: technical@eurotechfire.com
Phone: +44 (0) 203 141 0982