Skip to main content

Insights Panel & Event Planning Calculators

Learn how to use EventLab's Insights Panel and built-in calculators to estimate crowd capacities, parking and camping requirements, vehicle and pedestrian flow, evacuation times and infrastructure needs, all using data directly from your event map.

Accessing the Calculators

Calculators are built directly into various items on your map, including Locations and Routes.

To use a calculator:

  1. Select or draw a supported location or route on your map.

  2. Open the right-hand panel.

  3. Find the relevant calculator for that item.

  4. Enter your planning parameters or choose from the available presets.

  5. Your calculations will automatically update based on your inputs.

Many calculators include pre-set industry values, but you can also enter custom values to suit your event's specific requirements.


Location Calculators

Crowd Capacity Calculator

Estimate how many people can safely and comfortably fit within a defined area.

  1. Draw a Crowd Zone using the Location tool.

  2. Select the zone and open the right-hand panel.

  3. Toggle on the Crowd Capacity Calculator.

  4. Choose your preferred crowd density (people per square metre), or enter a custom value.

For example, a relaxed crowd density of 1 person per m² would give an estimated capacity of 1,000 people for a 1,000 m² area. This is useful for planning audience areas, viewing zones, queues and other spaces where people gather.

Parking Capacity Calculator

Estimate parking capacity, vehicle turnover and clearance times for your event.

  1. Draw a Parking Zone on your map.

  2. Toggle on the Parking Capacity Calculator in the right-hand panel.

  3. Select your parking layout from the available presets, such as grass field parking or angled bays, or enter your own area per vehicle.

  4. Adjust additional parameters, including:

    • Usable Area (%): The proportion of the zone available for parking, excluding roads, trees and unusable spaces.

    • People per Car: Average vehicle occupancy.

    • Average Stay: How long vehicles are expected to remain parked.

    • Event Duration: Total duration of your event.

    • Exit Lanes: Number of lanes available for vehicles leaving the site.

The calculator provides estimates for:

  • Car Spaces: Estimated number of vehicles that can park within the zone.

  • People Served: Estimated number of attendees accommodated.

  • Turnover Capacity: Total vehicle capacity over the event duration.

  • Time to Clear: Estimated time required for vehicles to exit.

  • Accessible Spaces: Estimated accessible parking requirements.

Camping Capacity Calculator

Estimate how many campers can be accommodated within your camping areas.

  1. Draw a Camping Zone on your map.

  2. Toggle on the Camping Capacity Calculator in the right-hand panel.

  3. Select your camping configuration, such as tents with cars or campervans.

  4. Adjust the available parameters or enter custom values to suit your camping layout.

The calculator estimates how many camping spaces and people can fit within the defined area.


Route Calculators

EventLab also includes calculators for different types of routes, helping you plan vehicle movements, pedestrian access, sporting events and emergency evacuations.

Vehicle Route Calculator

Estimate travel times and vehicle flow along roads and access routes.

  1. Draw a Vehicle Route on your map.

  2. Toggle on Travel Time in the right-hand panel.

  3. Enter the vehicle speed and number of lanes.

The calculator estimates:

  • One-Way Travel Time: How long vehicles take to travel the route.

  • Round-Trip Time: Estimated time to complete a return journey.

  • Vehicle Throughput: Estimated number of vehicles that can travel along the route per hour.

Useful for planning site access, internal traffic routes, shuttle operations and vehicle movement.

Pedestrian Route Calculator

Estimate how long it takes people to walk between different locations at your event.

  1. Draw a Pedestrian Route on your map.

  2. Toggle on Travel Time in the right-hand panel.

  3. Choose from the available walking pace presets or enter a custom speed.

  4. Enter the bottleneck width (narrowest point on the path).

EventLab calculates the estimated walking time based on the route distance, selected walking pace and bottleneck width.

TIP: Use this to estimate walking times between entry gates, stages, camping areas, amenities and other key locations.

Running Route Calculator

Plan running events and estimate participant flow along a course.

  1. Draw a Running Route on your map.

  2. Toggle on Finish Time in the right-hand panel.

  3. Enter your participant numbers and relevant event parameters (running paces for fastest/average/slowest runners and start time).

  4. Configure wave starts if applicable, including the number of waves and time between each start.

The calculator can estimate:

  • When the final participant is expected to finish.

  • The busiest periods along the course.

  • Peak finish-line throughput (participants per hour).

  • The impact of different wave-start configurations.

This is particularly useful for fun runs, marathons and other mass-participation sporting events.

Evacuation Route Calculator

Estimate evacuation times and identify potential bottlenecks along emergency evacuation routes.

  1. Draw an Evacuation Route on your map.

  2. Toggle on Evacuation Time in the right-hand panel.

  3. Enter your evacuation parameters, including:

    • Number of People: Total number of people requiring evacuation.

    • Narrowest Width: Width of the most restrictive point along the route, such as a doorway or gate.

    • Target Evacuation Time: Your desired time to complete the evacuation.

The calculator estimates:

  • Total evacuation time.

  • Queueing at the narrowest point.

  • Time required to walk the evacuation route.

This is useful for identifying potential bottlenecks and supporting emergency management and evacuation planning.

Important: These calculations are planning estimates and should be reviewed alongside your event's risk assessments, emergency management plans and relevant safety requirements.


Insights Panel

The Insights Panel brings together calculations and information from across your map into one central location.

Rather than reviewing each zone or route individually, you can see an overview of key event planning metrics.

Accessing the Insights Panel

  1. Open your event map.

  2. Click Insights in the top toolbar.

  3. Review the available insights and calculations for your event.

The panel draws on information from your mapped items and the parameters you've entered.

Infrastructure Requirements

The Insights Panel can also help you assess infrastructure requirements, including toilets.

For example, you can enter your event's relevant toilet requirements or local council guidelines and compare these against the infrastructure you've placed on your map.

The calculator can show:

  • Required Toilets: Estimated number of toilets needed based on your chosen requirements.

  • Existing Toilets: Number of toilets currently placed on your map.

  • Female/Male Split: Breakdown of toilet requirements by gender.

  • Shortfalls: Identify where additional facilities may be needed.

This helps you quickly identify potential infrastructure gaps and check your planning against relevant requirements.


Exporting Your Insights

You can export your Insights Panel calculations into a PDF for easy sharing and reference.

  1. Open the Insights Panel.

  2. Click Export.

  3. Download your insights as a PDF.

This is useful for sharing planning calculations with your team, suppliers, stakeholders or relevant authorities.


Did this answer your question?