You can adjust your RoboCap's camera settings using the RoboCap app for Android. Support for iOS is coming soon.
Step 1: Open the RoboCap App
Turn on your RoboCap.
Open the RoboCap app.
Select RoboCap.
Note: If your phone is already connected to RoboCap's Wi-Fi, the app will automatically connect to your device.
Step 2: Connect to RoboCap's Wi-Fi
Open your phone's Wi-Fi Settings.
Connect to your RoboCap's Wi-Fi network, usually named
Robocap_xxx.Enter the default password: 12345678.
Return to the app and tap Connect to RoboCap if needed.
Wait for the app to load your device details.
Step 3: Change Camera Settings
Tap the Camera tab at the bottom of the app.
The Live preview page will open. Tap Settings.
Choose the settings you want to adjust:
Country / Region: Select your country or region to set the appropriate flicker reduction frequency.
Scene mode: Choose the option that best matches your lighting conditions.
Manual exposure time: Adjust exposure manually if needed.
If your camera feed is flickering, select Reduce light flicker or Indoor / reduce flicker & motion blur under Scene mode.
Step 4: Save Changes
Scroll down and tap Save settings.
Wait for the settings to be applied.
Return to Live preview to check the results.
Important: Camera settings do not automatically adjust when you move between indoor and outdoor environments. If you switch to Indoor / reduce flicker & motion blur while indoors, remember to change back to Outdoor / natural light before recording outside to avoid overexposure.