Skip to main content

How to Unpair RoboWrist from RoboCap

You can unpair RoboWrist from RoboCap using either device in the RoboCap Android and iOS app.

Method 1: Unpair Through RoboCap

Step 1: Turn On RoboCap

  1. Connect RoboCap to a power bank using the provided USB-C cable.

  2. Turn on RoboCap using its Power Switch.

  3. Wait approximately 5–10 seconds for it to start up.

Step 2: Connect to RoboCap Using the App

  1. Open the RoboCap app on your phone.

  2. Select RoboCap.

  3. Open your phone's Wi-Fi Settings.

  4. Connect to RoboCap's Wi-Fi network, usually named Robocap_xxx.

  5. Enter the default password: 12345678.

  6. Return to the app and wait for it to connect.

Note: If your phone is already connected to RoboCap's Wi-Fi, the app will connect automatically.

Step 3: Unpair RoboWrist

  1. Once connected, the app will open the Status page.

  2. Tap the Pair tab at the bottom of the screen.

  3. Find the RoboWrist you want to remove from the paired devices list.

  4. Tap Unpair next to that RoboWrist.

  5. Follow any on-screen confirmation to complete unpairing.

Repeat for the second RoboWrist if needed.

Method 2: Unpair Through RoboWrist

Step 1: Turn On RoboWrist

  1. Press and hold the red Power Button on RoboWrist for approximately 5 seconds.

  2. Wait for RoboWrist to finish starting up.

Step 2: Open the RoboCap App

  1. Open the RoboCap app on your Android or iOS device.

  2. Select RoboWrist.

Step 3: Connect to RoboWrist's Wi-Fi

  1. Press and hold the black button on RoboWrist for approximately 8 seconds to enable Wi-Fi.

  2. Open your phone's Wi-Fi Settings.

  3. Connect to the RoboWrist Wi-Fi network, usually named Robowrist_xxx.

  4. Return to the RoboCap app.

Step 4: Open RoboWrist Details

  1. Wait for the app to connect and load your RoboWrist's details.

  2. Open the Info tab if it isn't already selected.

  3. If RoboWrist is paired, you'll see the Paired RoboCap section showing the connected RoboCap's details.

Step 5: Unpair RoboWrist

  1. Under Paired RoboCap, tap Unpair from RoboCap.

  2. A confirmation message will appear.

  3. Tap UNPAIR FROM ROBOCAP to confirm.

Step 6: Confirm Unpairing

Once unpairing is complete, you'll see the message:

"Unpaired. This RoboWrist is ready to pair with a RoboCap."

Your RoboWrist is now unpaired and can be paired with another RoboCap.

Note: If you have another RoboWrist to unpair, repeat the same process from Step 1.

Related Articles
Did this answer your question?