How to setup EarthRover Zero (Unboxing guide)

Now that you've received your EarthRover, we'll guide you through the unboxing and setup.

What's in the Box?

When you open your Earth Rover Zero package, you will find the following items:

Earth Rover Unit
2 pcs Extra Lens Caps: Use these as replacements for your rover's lenses if needed.
Adhesive Tape: This is provided to attach the flag to your Earth Rover.
Flag and Flag Pole: Attach the flag to make your rover more visible during operation.
Charger and Universal Adapter: Use these to charge your Earth Rover's battery.
Dowel Pins: Insert this to protect your bot's camera from any potential harm.
Screws and Screwdriver: These are included for assembling and maintaining different parts of the rover.

After opening your Earth Rover Zero, please follow these step-by-step instructions to set it up properly.

Step 1: Lift and Align the Head

Press the button on both sides of the bot simultaneously to lift the head part of the bot.
Once lifted, align the head properly.

Step 2: Secure the Head

Use the screws provided to secure the head in place. Make sure it is firmly attached.

Step 3: Attach the Pole Mounts and Flag

Locate the pole mount on the side of the bot and screw the pole onto their designated positions securely.
Use the adhesive tape provided to attach the flag to the flagpole.

Step 4: Attach the Flag and insert the threaded dowel pin

Lastly, insert the threaded dowel pin under the front camera and back camera of the bot to protect it from any potential harm.

Now that your bot is set up, you're ready to activate it! 👉 Learn how to activate your EarthRover to start driving.

Click the chat widget in the lower-right corner to connect with us.

We're here to help you from Mondays to Fridays SGT. 😊