Your terminal comes pre-loaded with the ability to connect via cellular, WiFi, and Bluetooth. It will connect to the cellular network automatically.
Step 1: Open Settings
Click on Network
Passcode: 0140
Step 2: Select Wifi
Toggle "Use Wi-Fi" to "on"
Select network
Step 3: Connect
Enter the network password
Click Connect
SFO1: Counter Stand Set Up
Insert provided Allen Wrench into the small side hole on each side and press (repeat on the other side) to separate the two pieces of the stand.
Ensure you are using the provided power cord and brick.
Use provided Allen Wrench to attach the top piece to the back of the SFO1 terminal with the 2 silver screws.
Attach provided cord in the back of the SFO1.
Thread provided power cord through the bottom piece, reattach top piece so the cord is visible through the hole on the top piece.
Snap both pieces in place.
