Method 1:
Hold down the bottom corners of the touch screen for another way to enter dealer mode.
Method 2:
STEP 1:
• Put the system into ‘Dealer Mode’
• Hold the Driver Side Temp Up and Temp Down and Front Defrost buttons down at the same time for 7-10 seconds (location of buttons may vary across vehicles). The ‘Dealer Mode’ screen should appear
• Touch ‘ System Information’
• Touch ‘ Radio Part Information’
(location of buttons may vary across vehicles)
STEP 2:
• In the 'Radio Part Information' Screen, you will see a line called 'Application Version.'
• Take a picture of this information or write it down exactly as it appears per the example below and click ‘CONTINUE’
• Use the back arrow or ‘X’ at top right of screen to exit Dealer Mode.
Example Only. Each system will have a unique Application Version
As an Example Only:
• The example at left uses Application Version:
USA-ASO-8.4-QR-34.5.2-20200113-Q0C4
(Note: you will need to enter periods and dashes. If you see
‘ASO’ or ‘SBX’ - those are letters. Other <0’s> are likely numbers)
For UAX Dealer Mode Access:
Hold your fingers right under the the icons to the farthest left and right bottom corners of the radio screen.