This document lists the full range of extruded products and fixtures available in Microvellum's Foundation Library. Extruded products are products that drawn or extruded along a 2D polyline path, allowing for the creation of products in a wide variety of shapes, with many extruded products automatically creating separate segments based on the angle/shape of the line itself. Products within this category of the Foundation Library vary, with options for extruding countertops, die walls, cabinets, a toe kick base, moldings, as well as parts that can be combined and customized to create or add onto a new product.
This document will reference “Standard Prompts”, referring to the set of prompts that are generally present in all products in the Microvellum Foundation Library catalog by default. These prompts will not be listed among the prompts of products, as they are considered default. Standard Prompts are the following:
Width
Height
Depth
Toe Kick Height
Left/Right Filler Width
Product Name
Product Version
Left/Right Finished End
Left/Right Applied End
Show Construction Options
Show Material Options
Show Advanced Options
Show Flatshot Options
Show 2D Drawing Options
Show Item Number Options
Show Rendering Options
Extruded Countertops
Extruded Master Countertop
Product Category: Extruded Products and Fixtures- Extruded Countertops
Product Description
The Extruded Master Countertop is the master level product from which all other extruded countertop products are derived- The product is shaped along the polyline path selected upon drawing, with each arc or corner in the polyline resulting in a second product segment being drawn.
Product Features/Prompts
Main Options Tab
Offset From Polyline
Left Join Type
Right Join Type
Countertop Front Edge Detail
Countertop Left Edge Detail
Countertop Right Edge Detail
Countertop Back Edge Detail
Hardware Options
Add Countertop Connectors
Countertop Connector Quantity
Countertop Connector Position From Rear
Countertop Connector Position From Front
Countertop Connector Type
Countertop No Splash
Product Category: Extruded Products and Fixtures- Extruded Countertops
Product Description
The Countertop No Splash product derived from the Extruded Master Countertop product- the countertop comes with no backsplash as a default and has no set default edge detailing. This product possesses all the standard countertop prompts and modifications available to Foundation Library Extruded Countertop products.
Product Features/Prompts
Main Options
Left Join Type
Right Join Type
Countertop Front Edge Detail
Countertop Left Edge Detail
Countertop Right Edge Detail
Countertop Back Edge Detail (Back Splash by Default)
Add Buildup
Override Angles
Is Buyout
Position of Part (Left of Line/Right of Line)
Hardware Options
Add Countertop Connectors
Countertop Connector Quantity
Countertop Connector Position From Rear
Countertop Connector Position From Front
Countertop Connector Type
Countertop No Splash Wood Edge
Product Category: Extruded Products and Fixtures- Extruded Countertops
Product Description
The Countertop No Splash Wood Edge product derived from the Extruded Master Countertop product- the countertop comes with no backsplash as a default and has wooden front edge detailing as a standard. This product possesses all the standard countertop prompts and modifications available to Foundation Library Extruded Countertop products.
Product Features/Prompts
Main Options
Left Join Type
Right Join Type
Countertop Front Edge Detail
Countertop Left Edge Detail
Countertop Right Edge Detail
Countertop Back Edge Detail (Back Splash by Default)
Add Buildup
Override Angles
Is Buyout
Position of Part (Left of Line/Right of Line)
Hardware Options
Add Countertop Connectors
Countertop Connector Quantity
Countertop Connector Position From Rear
Countertop Connector Position From Front
Countertop Connector Type
Countertop With Splash
Product Category: Extruded Products and Fixtures- Extruded Countertops
Product Description
The Countertop With Splash product derived from the Extruded Master Countertop product- the countertop comes with a backsplash as the countertop back edge detail by default. This product possesses all the standard countertop prompts and modifications available to Foundation Library Extruded Countertop products.
Product Features/Prompts
Main Options
Left Join Type
Right Join Type
Countertop Front Edge Detail
Countertop Left Edge Detail
Countertop Right Edge Detail
Countertop Back Edge Detail (Back Splash by Default)
Add Buildup
Override Angles
Is Buyout
Position of Part (Left of Line/Right of Line)
Hardware Options
Add Countertop Connectors
Countertop Connector Quantity
Countertop Connector Position From Rear
Countertop Connector Position From Front
Countertop Connector Type
Countertop With Splash Wood Edge
Product Category: Extruded Products and Fixtures- Extruded Countertops
Product Description
The Countertop With Splash Wood Edge product derived from the Extruded Master Countertop product- the countertop comes with a backsplash as the countertop back edge detail by default and has wooden front edge detailing as a standard. This product possesses all the standard countertop prompts and modifications available to Foundation Library Extruded Countertop products.
Product Features/Prompts
Main Options
Left Join Type
Right Join Type
Countertop Front Edge Detail
Countertop Left Edge Detail
Countertop Right Edge Detail
Countertop Back Edge Detail (Back Splash by Default)
Add Buildup
Override Angles
Is Buyout
Position of Part (Left of Line/Right of Line)
Hardware Options
Add Countertop Connectors
Countertop Connector Quantity
Countertop Connector Position From Rear
Countertop Connector Position From Front
Countertop Connector Type
Extruded Die Walls
Bar Die Wall
Product Category: Extruded Fixtures and Products- Extruded Die Walls
Product Description
The Bar Die Wall product derived from the Master Die Wall product- the product is a die wall with adjustable stud spacing, built-in wall segments, and external foot rails. The product contains standard prompt options, as well as Die Wall exclusive prompt options.
Product Features/Prompts
Main Tab
Offset from Polyline
Max Wall Length
Wall Segment Qty
Stud Max Spacing
Stud Qty
Foot Rail Offset
Foot Rail Height Off Floor
Add Foot Rail
Override Angles
Add Toe Kick
Is Buyout
Use Separate Floor Plate
Die Wall w Skins
Product Category: Extruded Fixtures and Products- Extruded Die Walls
Product Description
The Die Wall w Skins product is derived from the Master Die Wall product- the product is a die wall with adjustable settings for layers of skins on the inside and outside of the wall, as well as an adjustable toe kick. The product contains standard prompt options, as well as Die Wall exclusive prompt options.
Product Features/Prompts
Main Tab
Offset from Polyline
Max Wall Length
Wall Segment Qty
Stud Max Spacing
Stud Qty
Left Angle
Right Angle
Toe Kick Inset
Inside Skin Quantity
Outside Skin Quantity
Inside Skin Gap
Outside Skin Gap
Inside Stacked Skin Quantity
Outside Stacked Skin Quantity
Toe Kick Stack Skin Quantity
Override Angles
Add Toe Kick
Is Buyout
Use Separate Floor Plate
Die Wall w Studs Only
Product Category: Extruded Fixtures and Products- Extruded Die Walls
Product Description
The Die Wall With Studs Only product is derived from the Master Die Wall product- the product is a die wall with only adjustable studs and a toe kick, the product having no skins attached to it. The product contains standard prompt options, as well as Die Wall exclusive prompt options.
Product Features/Prompts
Main Tab
Offset from Polyline
Max Wall Length
Wall Segment Qty
Stud Max Spacing
Stud Qty
Left Angle
Right Angle
Toe Kick Inset
Override Angles
Add Toe Kick
Is Buyout
Use Separate Floor Plate
Master Die Wall
Product Category: Extruded Fixtures and Products- Extruded Die Walls
Product Description
The Master Die Wall is the product from all other extruded die wall products are derived, having the widest array of prompts and options, with every prompt from the full range of die wall products (skins, studs, segments, toe kick options, foot rails, etc.) being available in the master product. Outside of the various Die Wall prompt options, the product contains standard prompt options.
Product Features/Prompts
Main Tab
Offset from Polyline
Max Wall Length
Wall Segment Qty
Stud Max Spacing
Stud Qty
Left Angle
Right Angle
Toe Kick Inset
Inside Skin Quantity
Outside Skin Quantity
Inside Skin Gap
Outside Skin Gap
Inside Stacked Skin Quantity
Outside Stacked Skin Quantity
Toe Kick Stack Skin Quantity
Override Angles
Add Toe Kick
Is Buyout
Use Separate Floor Plate
Extruded Fixtures
Extruded Master Cabinet
Product Category: Extruded Fixtures and Products- Extruded Fixtures
Product Description
The Extruded Master Cabinet product that the Extruded Base Cabinet is built from, able to be customized and modified to create different extruded cabinet products. This product can contain up to 5 different cabinet storage sections, uses standard prompts, as well as prompts specific to extruded cabinets (cabinet quantity, override angles, multiple cabinet options, etc.) By default, the cabinet quantity is set to 5, with a maximum width of 50.
Product Prompts/Features
Main Tab
Max Cabinet Width
Cabinet Quantity
Add Elbow Join Left
Add Elbow Join Right
Override Angles
Shadow Line Finger Pull
Back Finished
Top Finished
Bottom Finished
Add Countertop
Face Options
Door Type
Door Style
Left Reveal
Right Reveal
Top Reveal
Bottom Reveal
Door Gap
Door to Cabinet Gap
Add Top Facia
Toe Kick Options
Inset Toe Kick
Amount To Extend Left Toe Kick
Amount To Extend Right Toe Kick
Cabinet 1-5 Options
Cabinet Face Options
Cabinet Component Insert
Cabinet Adjustable Shelf Quantity
Cabinet Component Setback
Cabinet Continuous Shelf Holes
Cabinet Top Drawer
Counter Top Options
Countertop Overhang Front
Countertop Overhang Back
Countertop Overhang Left
Countertop Overhang Right
Countertop Front Edge Detail
Countertop Left Edge Detail
Countertop Right Edge Detail
Countertop Back Edge Detail
Appliance Options
Hardware Options
Handle Distance From Side
Base Handle Distance From Top
Tall Handle Distance From Bottom
Upper Handle Distance From Bottom
Handle Type
No Handle
Horizontal Handle
Add Lock
Add Wall Hanger
Extruded Base Cabinet
Product Category: Extruded Fixtures and Products- Extruded Fixtures
Product Description
The Extruded Base Cabinet product, derived from the Extruded Master Cabinet product- this product contains up to 5 customizable cabinet container spaces, as well as options for separation into multiple segments using elbow joins. The Extruded Base Cabinet contains both standard prompts for a cabinet as well as the set of prompts specific to extruded cabinets (max width, quantity of cabinets, etc.) By default, the cabinet quantity is set to 5, with a maximum width of 50.
Product Prompts/Features
Main Tab
Max Cabinet Width
Cabinet Quantity
Add Elbow Join Left
Add Elbow Join Right
Override Angles
Shadow Line Finger Pull
Back Finished
Top Finished
Bottom Finished
Add Countertop
Face Options
Door Type
Door Style
Left Reveal
Right Reveal
Top Reveal
Bottom Reveal
Door Gap
Door to Cabinet Gap
Add Top Facia
Toe Kick Options
Inset Toe Kick
Amount To Extend Left Toe Kick
Amount To Extend Right Toe Kick
Cabinet 1-5 Options
Cabinet Face Options
Cabinet Component Insert
Cabinet Adjustable Shelf Quantity
Cabinet Component Setback
Cabinet Continuous Shelf Holes
Cabinet Top Drawer
Counter Top Options
Countertop Overhang Front
Countertop Overhang Back
Countertop Overhang Left
Countertop Overhang Right
Countertop Front Edge Detail
Countertop Left Edge Detail
Countertop Right Edge Detail
Countertop Back Edge Detail
Appliance Options
Hardware Options
Handle Distance From Side
Base Handle Distance From Top
Tall Handle Distance From Bottom
Upper Handle Distance From Bottom
Handle Type
No Handle
Horizontal Handle
Add Lock
Add Wall Hanger
Extruded Upper Cabinet
Product Category: Extruded Fixtures and Products- Extruded Fixtures
Product Description
The Extruded Upper Cabinet product derived from the Extruded Master Cabinet- this product is an upper cabinet with up to 5 customizable cabinet segments, using both standard prompts and prompts exclusive to extruded cabinets, including the option to space and angle the cabinet product. By default, the cabinet quantity is set to 5, with a maximum width of 50.
Product Prompts/Features
Main Tab
Max Cabinet Width
Cabinet Quantity
Add Elbow Join Left
Add Elbow Join Right
Override Angles
Shadow Line Finger Pull
Back Finished
Top Finished
Bottom Finished
Add Countertop
Face Options
Door Type
Door Style
Left Reveal
Right Reveal
Top Reveal
Bottom Reveal
Door Gap
Door to Cabinet Gap
Add Top Facia
Cabinet 1-5 Options
Cabinet Face Options
Cabinet Component Insert
Cabinet Adjustable Shelf Quantity
Cabinet Component Setback
Hardware Options
Handle Distance From Side
Base Handle Distance From Top
Tall Handle Distance From Bottom
Upper Handle Distance From Bottom
Handle Type
No Handle
Horizontal Handle
Add Lock
Add Wall Hanger
Extruded Toe Kick Base
Product Category: Extruded Fixtures and Products- Extruded Fixtures
Product Description
The Extruded Toe Kick Base product is a toe kick base that is designed to conform to the shape of a given cabinet. The product has options for skin application (including adding multiple layers of skins) on the face and back of the product, as well as options for customizing the number of sleepers in the product (this is calculated by default based on the line the product was extruded along). As with most products, the Extruded Toe Kick Base utilizes standard prompt options, as well as options exclusive to extruded products such as setting of maximum wall length, segmenting of the product based on angle, and how much to offset (if at all) product position relative to the polyline path it was extruded along.
Product Prompts/Features
Main Tab
Offset From Polyline
Max Wall Length
Wall Segment Quantity
Sleeper Quantity
Sleeper Max Spacing
Left Angle
Right Angle
Kick Face Stacked Quantity
Kick Back Stacked Quantity
Add Bottom Rails
Front Finished
Back Finished
Override Angles
Extruded Master Part
Product Category: Extruded Fixtures and Products- Extruded Fixtures
Product Description
The Extruded Master Part product from which the Extruded Horizontal Part, Extruded Vertical Part, and Extruded Part Collection are derived- the product is comprised of a customizable horizontal curved part, which can be segmented into multiple individual parts, and used as a basis to create a new product, with the part available for customization to create new part products as well. The product uses standard prompts and has prompts which control its Z-axis height, the level of offset from the polyline it is extruded from, as well as prompts to add optional elbow joins.
Product Prompts/Features
Main Tab
Z Height
Offset From Polyline
Add Elbow Join Left
Add Elbow Join Right
Extruded Part Horizontal
Product Category: Extruded Fixtures and Products- Extruded Fixtures
Product Description
The Extruded Part Horizontal product is a customizable horizontal curved part, which can be which can be segmented into multiple individual sections and used as a basis for the creation of other parts/products. The part uses standard prompts and has prompts which control its Z-axis height and the level of offset from the polyline it is extruded from.
Product Prompts/Features
Main Tab
Z Height
Offset From Polyline
Extruded Part Vertical
Product Category: Extruded Fixtures and Products- Extruded Fixtures
Product Description
The Extruded Part Vertical product is an extruded part that rises vertically, with a default height of 1000. The product uses standard prompts as well as prompts which control its Z-axis height and the level of offset from the polyline it is extruded from.
Product Prompts/Features
Main Tab
Z Height
Offset From Polyline
Extruded Part Collection
Product Category: Extruded Fixtures and Products- Extruded Fixtures
Product Description
The Extruded Part collection is a product comprised of multiple parts that can be modified to fit certain lengths. By default, the product contains 10 of these parts in vertical orientation. Parts can be customized on a part-by-part level, with a selection of orientation, positioning, as well as material for the part and the edges. The product features standard prompts as well as prompts specific to extruded parts, as well as options available for each of its respective parts within the collection.
Product Prompts/Features
Main Tab
Z Height
Offset From Polyline
Part Gap
Part Quantity
Part 1-10 Options
Part Width
Part Orientation
Part Offset From Polyline
Thickness
Part Height Above Floor
Part Material
Part Length 1 Edge
Part Length 2 Edge
Part Width 1 Edge
Part Width 2 Edge
Extruded Moldings
Extruded Base
Product Category: Fixtures and Extruded Products- Extruded Moldings
Product Description
The Extruded Base molding product is an extruded baseboard molding able to be created to conform to the shape of a wall component or to act as a floor scribe for the bottom of a cabinet. The product uses standard prompts as well as prompts to control the scribe/floor scribe of the molding, as well as offering a wide selection of base molding shapes/patterns.
Product Features/Prompts
Main Tab
Scribe
Floor Scribe
Base Selection
Finish Top Edge
Add Decorative Cutout
Material Options
Base Grain Direction
Base Max Length
Base Material
Part 2 Material
Edit Material
Extruded Crown
Product Category: Fixtures and Extruded Products- Extruded Moldings
Product Description
The Extruded Crown product is an extruded molding product capable of being added to a room to add crown molding to the top of walls, appliances, or cabinetry. The Extruded Crown product uses standard prompts as well as prompts allowing one to control the amount of overhang, crown size, flat crown dimensions and specifications, and valance length.
Product Features/Prompts
Main Tab
Cabinet Height Above Floor
Scribe
Top Scribe
Cabinet Overhang
Valance Height
Crown Selection
Crown Depth
Crown Height
Flat Crown Part Width
Flat Crown Mount Edge Width
Flat Crown Chamfer Dim
Flat Crown Bevel Angle Left
Flat Crown Bevel Angle Right
Crown From Valance Bottom
Crown Max Length
Mount Strip Total Length
Vertical Mount Strip Total Length
Valance Total Length
Crown Total Length
Flat Crown Total Length
Mount Strip Joint Location
Vertical Mount Strip Joint Location
Valance Joint Location
Flat Crown Joint Location
Add Crown Molding
Finish Top Edge
Full Bottom
Miter Valance to Mount Strip
Add Vertical Mount Strip
Material Options
Edit Material
Extruded Valance
Product Category: Fixtures and Extruded Products- Extruded Moldings
Product Description
The Extruded Valance an extruded molding product capable of being added to a room to as valance molding, able to be placed on wall components and at the bottom of certain other room components, appliances, or certain cabinets. The Extruded Valance product uses standard prompts as well as prompts allowing one to control the scribe of the molding, location and height, as well as the locations of the strip joint.
Product Features/Prompts
Main Tab
Cabinet Height Above Floor
Scribe
Cabinet Overhang
Valance Height
Mount Strip Total Length
Valance Total Length
Mount Strip Joint Location
Valance Joint Location
Finish Top Edge
Finish Bottom Edge
Miter Valance to Mount Strip