Recommended Hardware
Note: Customers using scanners not listed above will need to test for themselves as we cannot guarantee they will work with the Access Mintsoft app.
We recommend purchasing the devices we have tested and know to work with the Access Mintsoft app from the list below, we can’t guarantee other devices will work. All devices must be running at least Android 11+.
Newland devices (Including MT65 and MT90).
Newland specifically must be running Android 11+ to work.
Newland devices have some additional Set-up Steps.
Zebra devices (Including TC21, TC22, and TC26).
Zebra TC20 is not supported.
Zebra devices have some additional Set-up Steps.
Honeywell devices (Including CK65).
Honeywell CK65 is supported to use the Access Mintsoft app but GS1 scanning isn't supported. This may be rectified in newer devices, as it's a limitation of the software on that device.
Honeywell devices have some additional Set-up Steps.
Smartphone Usage
If you are using a smartphone with the Access Mintsoft app, you must pair it with a handheld scanner. The Access Mintsoft app does not use the phone’s camera for scanning.
Recommended Software
Android 11+ is the software version we officially support on the scanner to use the Access Mintsoft app. We do not provide support to customers using Android 10 or below on the Access Mintsoft app.
Google Chrome
We recommend that you use Google Chrome on all scanner devices. The version must be Chrome v96+
Check for any updates on the Google Play Store.
It was released in 2021, so most new devices should ship with it by default.