The Conveyor USB device connects any computer to the Mobius Conveyor app.
After plugging it into a USB port on any computer, your dictations are typed
wherever a cursor is placed. No software installation is necessary!
You can purchase a USB here, and we've included the directions below on how to use it once you receive it:
Plug-in the USB to your computer, and the USB will light up with alternating white and orange lights. If it does not light up, flip the USB over and re-plug it into your USB port. As a general rule, the logo should be facing either up or to the left for vertical ports.
Log into the Mobius Conveyor app, and toggle over on USB, and tap Connect Now.
An image of the Conveyor USB will appear, and from there, tap "Pair Now". If the Conveyor USB does not appear, make sure Bluetooth is enabled on your device and that Mobius Conveyor has permission to use Bluetooth in the iOS device Settings.
The screen will then display Connected to Conveyor USB and you can toggle over to enable Mac or PC depending on the computer you're currently using.
You can then tap on the microphone to start dictating as normal.
The best part about using the Mobius Conveyor USB is that now there are no downloads or installations for the computer! Simply plug in and dictate. I hope this helps and if you run into any questions or issues, please shake your i-device to reach our support team!