Your inventory may be handled multiple times between leaving your facility and reaching an Amazon fulfillment center. Proper packaging helps protect both the shipping box and the products inside.
Choose an Appropriate Shipping Box
Use a sturdy box that's appropriate for the size and weight of the inventory.
Avoid boxes that are:
Crushed or structurally weakened.
Torn or punctured.
Too small for the contents.
Excessively large for the products without adequate cushioning.
Protect the Products Inside
Products shouldn't be able to move excessively during transportation.
Use appropriate packing materials to fill empty spaces and protect items from movement and impact. Fragile products may require additional protection based on Amazon's applicable prep requirements.
Don't Overpack the Box
Trying to fit too much inventory into one box can put unnecessary pressure on the products and weaken the shipping box.
If the box is bulging, difficult to close, or doesn't maintain its normal shape, consider using a larger box or dividing the inventory between boxes.
Seal the Box Securely
Once you've verified the contents:
Close all box flaps properly.
Use strong packing tape.
Secure the primary seams.
Check that the box remains firmly closed when lifted.
Don't seal the box until you've finished verifying its contents.
Measure and Weigh the Finished Box
After packing and sealing, take the final external dimensions and weight of the box.
Use these final measurements when completing your shipment information rather than relying on the empty box's original measurements.
Final Inspection
Before handing the box to the carrier, check that:
The box is structurally sound.
Products aren't moving excessively inside.
All seams are securely sealed.
Required labels are attached and readable.
The box weight and dimensions have been verified.
The physical contents match the submitted box content.