Skip to main content

Creating and Cancelling Count Jobs

Create count jobs manually from one or more count plans, see the rules that can stop a job from being created, and cancel count plans or individual count lines.

Overview

In Logiwa IO you can create count jobs from a count plan yourself, for example for an ad-hoc or priority count, and split a large plan into several jobs. When a count is no longer needed, cancel the whole plan or only some of its lines.

For the full cycle count process and the status reference, see A Guide to Managing and Executing Cycle Counts. To set up plans, job types and wave rules, see Create a Count Plan, Create a Job Type for a Cycle Count and Create Wave Rules for a Cycle Count. The jobs you create are counted as described in Counting on the Mobile App.

When to use it

  • Start an ad-hoc or priority count without waiting for a wave rule.

  • Split a large count plan into several smaller jobs with a Batch Size.

  • Stop a count that is no longer needed by cancelling the plan.

  • Remove only some locations or SKUs from a count by cancelling their lines.

Prerequisites


Create a count job manually

Wave rules create jobs automatically. For an ad-hoc or priority count, create the job from the count plan yourself.

  1. Go to the Count Plan screen.

  2. Select one or more plans in Pending status.

  3. Click Create Job.

  4. Select the Job Type (required). Its conditions decide which lines of the plan get a job, and its Order By rules decide the order of the locations (see below).

  5. Enter the Batch Size: the maximum number of locations in one job. For example, a plan with 100 locations and a Batch Size of 50 creates two jobs. A Batch Size of 0 creates one job with all locations.

  6. Optional: under Assign To, select a user to assign the job to only that user. If you don't select a user, the job goes to the Job Pool, where any authorized user can pick it on the mobile app.

  7. Click Save. The job(s) are created and the plan status changes to Ready to Count.

Several plans at once. You can select several plans and create their jobs in one Create Job action. Each selected plan is processed separately and the Batch Size applies per plan; plans are never merged into one job.

Example: With a Batch Size of 2, a plan with 4 locations creates 2 jobs and a plan with 12 locations creates 6 jobs.

Job type conditions. Only the plan lines that match the selected job type's conditions are put into jobs: Location Count plans use its Location Conditions, SKU Count plans its SKU Conditions. A job type without conditions includes all active lines. Lines that don't match stay in the plan without a job. To count them, create a job for them with a job type whose conditions they match; if they don't need counting, cancel them (see "Cancel individual count lines" below). If no line of the selected plan(s) matches, no job is created and you see "Not Enough Count Plan Line after job type condition is met".

Example: A plan has two locations in Aisle A and two in Aisle B. With a job type whose condition is Location Aisle = B, Create Job creates jobs only for the two Aisle B locations. The Aisle A locations stay in the plan without a job.

Location order. For Location Count plans, locations are sorted by the job type's Order By rules and then split into consecutive batches. If the job type has no Order By rules, locations are sorted by Walking Path Priority (ascending). See Configuring Job Type Order By Rules.

Example: 10 locations with a Batch Size of 3 create jobs with locations 1–3, 4–6, 7–9 and 10.

Example: With the Order By rule Walking Path Priority (Descending) and a Batch Size of 1, the location with priority 4 gets the first job and the location with priority 3 the next.

If the job isn't created, see "Job creation rules" below.

Job creation rules

Rule

What happens

Plan is not Pending

A job can only be created for a Pending plan. Other plans are rejected with an error, so a plan never receives duplicate jobs.

Cancelled lines

Lines cancelled on Location Details or SKU Details are skipped at job creation; only active lines get count tasks. If all lines are cancelled, no job is created and the plan becomes Cancelled.

Job type conditions

Location Count plans use the job type's Location Conditions, SKU Count plans its SKU Conditions. Only matching lines get a job; lines that don't match stay in the plan without a job until you create a job for them with a matching job type or cancel them. If no line matches, no job is created: "Not Enough Count Plan Line after job type condition is met". See Create a Job Type for a Cycle Count.


Cancel a count plan

  1. On the Count Plan screen, select one or more plans. Plans in Cancelled or Inventory Updated status are excluded automatically: the Cancel action is disabled for them.

  2. Click Cancel. The Cancel Count Plan(s)? modal says "You are about to cancel the selected count plan(s). This action cannot be undone."

  3. Click Cancel Count Plan(s), or Close to stop without sending any request.

The result depends on each selected plan:

Result

What you see

All plans cancelled

A green success toast, and the grid refreshes.

No plans cancelled

A red toast: "Selected Count Plan(s) cannot be cancelled. These count plan(s) contain one or more lines in Inventory Updated status and cannot be cancelled." The grid is not refreshed, as nothing changed.

Some plans cancelled, some blocked

The Some Count Plans Cannot be Cancelled pop-up shows how many plans were selected, cancelled and blocked, and lists the blocked plan codes, which you can copy to the clipboard. The grid refreshes to show the cancelled plans.

⚠️ A plan with one or more lines in Inventory Updated can't be cancelled: an inventory update can't be undone, so the plan can no longer be fully reversed. Review its lines on the Location Details or SKU Details screen.

When a plan is cancelled:

  • Lines in Ready to Count, Count Started or Count Completed become Cancelled.

  • Lines in Recount Created are kept unchanged as a record and don't block the cancellation.

  • The plan's jobs are removed from Job Management.

  • The plan is no longer picked up by Cycle Count wave rules.

Cancel individual count lines

To remove only some locations or SKUs from a count, cancel their lines.

  1. On the Count Plan screen, click the plan.

  2. Open the Location Details or SKU Details tab.

  3. Select one or more lines.

  4. Click Cancel. The lines move to Cancelled in the Status column.

What happens next:

  • If the plan has no job yet, the cancelled lines are skipped when you create the job.

  • If a job already exists, the related tasks are cancelled and removed from the mobile job. Operators are no longer sent to those locations or SKUs, and the job is Completed once the remaining lines are counted.

  • After each cancel, the plan status is re-evaluated. If all lines are cancelled, the plan becomes Cancelled.


Common questions

Why can't I create a job for my count plan? The plan must be in Pending status, have at least one line that is not cancelled, and have at least one line that matches the job type's conditions. Otherwise you see an error, for example "Not Enough Count Plan Line after job type condition is met". See "Job creation rules" above.

Why can't I cancel a count plan? It has at least one line in Inventory Updated, and an inventory update can't be undone. The Cancel action is disabled for plans in Cancelled or Inventory Updated status.

Why did some locations or SKUs of my plan get no job? They don't match the conditions of the job type you selected. Lines that don't match stay in the plan without a job. Create a job for them with a job type whose conditions they match, or cancel them if they don't need counting.

Can I undo a cancellation? No. As the Cancel Count Plan(s)? modal says, the action cannot be undone. A cancelled plan can no longer be used to create jobs.

Did this answer your question?