The OctoEverywhere Bambu Connect plugin needs your Bambu Lab 3D printer's Access Code to connect and provide remote access, AI failure detection, and more.
We have created a quick and easy guide that helps you find your Access Code for any Bambu Lab printer. Just pick your printer below.
Bambu Labs X1 Carbon or X1E
Bambu Labs X1 Carbon or X1E
To find your Access Code on the Bambu Labs X1 Cabon or X1E:
Use the touch screen on your X1 Carbon or X1E to open the printer settings.
The settings icon is an octagon with a black dot in the middle.
Select the "General" tab at the top of the settings page.
Look for the text that says "Access Code"
Write down or take a picture of the Access Code.
If your Access Code is all zeros, press the refresh icon next to the Access Code or temporarily enable and disable LAN Only mode. The Access Code will continue to work even when you disable Lan Only mode again.
Bambu Labs P1P or P1S
Bambu Labs P1P or P1S
To find your Access Code on the Bambu Labs P1P or P1s:
Use the screen on your P1P or P1s to open the printer settings.
The settings icon is an octagon with a black dot in the middle.
Select the WLAN option in the settings menu.
At the bottom, you will find the Access Code.
Write down or take a picture of the Access Code.
Bambu Labs A1 or A1 Mini
Bambu Labs A1 or A1 Mini
To find your Access Code on the Bambu Labs A1 or A1 Mini:
Use the screen on your A1 or A1 Mini to open the printer settings.
Press the down arrow on the settings list until you see "LAN Only Mode" and tap it.
Write down or take a picture of the Access Code.