Bill one unit or many at once, such as a special assessment, a key fob or a one-off fee. To bill the same amount every month or year, see Set up a recurring invoice.
To add a fee to a unit, create an invoice for that unit as described here. Two kinds of fee have their own articles: a fine for a violation is added from the violation (see Add a fine to a violation), and a fee for paying late is added as a late fee on the invoice (see Add late fees). For a special assessment, see Bill a special assessment below.
Before you start: You need Invoices write access. Your association also needs a deposit account to receive payments. If none is set up, the form says "Connect a bank account first. Invoices need an account to deposit into." and offers Connect bank account. (If your association uses PayHOA's banking, Treasury, you don't pick a deposit account at all; see Good to know below.)
Step 1: Choose the units
Click Invoices in the left menu, then Create an invoice.
Select units to invoice opens. Tick each unit to bill. Use the search box or the Unit tags, Owner tags and Balance filters to narrow the list.
Click Save selected units (Save selected unit when you ticked one).
The Create new invoices page shows a N units selected button under Units to bill. Click it to change them. You can also add your logo under Organization logo; it appears on invoices.
Tip: To bill one unit, open the unit from Units and click Add invoice. The unit is filled in for you.
Step 2: Add a charge
Click Add charge and fill in the form.
Charge title — what owners see, such as Pool key replacement. As you type, PayHOA suggests past charges with that title; pick one to copy its details. The form then shows "Copied from a past charge. Check the dates before saving." because the dates are reset to today and a month from today.
Charge description (required) — shown on the invoice under the title.
Charge message (optional) — added at the bottom of the invoice email.
Revenue category — the income account this charge is recorded under.
Deposit bank account — where payments go. (Not shown if your association uses Treasury; payments go to your Treasury account automatically.)
Billed to — the units you picked, with View all to list them. If you opened Add charge without picking units first, you choose Bill to → All N units or Pick units here instead.
Charge each unit — The same amount, or A different amount to type an amount per unit. With different amounts, Fill all with sets every unit to one figure and Fill empty amounts with fills only the blanks.
Amount — more than $0. Total for N units shows the grand total.
How often — leave on One time for a single invoice.
Active date — the day the invoice is issued and emailed. Defaults to today.
Due date — defaults to one month after the active date.
Email invoice on active date — leave on to email owners when the invoice is issued. See How invoices are sent.
Early payment discount and Late fees — optional. See Offer an early payment discount and Add late fees.
Click Save charge. The charge is added to the list on the page. Nothing is created yet. Add more charges if you need them; each unit gets one invoice per charge.
Step 3: Preview and submit
Click Preview to see the email owners will get.
Click Submit (it shows the number of invoices, such as Submit 2 invoices, or reads Submit invoices when one of the charges is recurring).
You're taken back to the Invoices page, where a banner shows "Creating invoices…" and its progress. It runs in the background, so you can leave the page. When it's done you'll see "All N invoices were created." If some failed, click View Details to retry them.
Note: Only one batch of invoices can be created at a time per association. Clicking Submit twice won't bill anyone twice.
If the invoices aren't on the units yet, or the banner keeps running
After you submit, the invoices are created one after another in the background, so for a while they aren't on the units, the owners' accounts or the invoice list. A large batch takes longer than a small one. Don't build the same charges again while you wait: that is a new batch, and it would bill the owners twice.
The banner is still counting, for example Creating invoices… 120 of 300 invoices. The batch is still running. While it runs, Create an invoice is switched off for everyone in your association, and another submit is refused with Invoices already in progress. That's why new charges are blocked until it finishes.
The banner says We've lost track of this run. The page couldn't read the batch's progress; the batch is very likely still going. Click Check again.
The banner has gone and you don't see the invoices. Reload the Invoices page and look on the All invoices tab (an invoice with a later active date is listed as Future), then open one of the units and check its All invoices tab. A charge that was recurring only, with no invoice due yet, shows no banner at all; look for its template on the Recurring templates tab instead.
The banner finished with N of M invoices were created. Some failed. Click View Details to see which, and retry them there.
If the count hasn't moved for a long time, or the banner is gone and the invoices still aren't on the units, contact PayHOA support with the charge title, how many units you billed and the time you clicked Submit. Don't submit again in the meantime.
The invoices you create for owners are never listed under Settings → Billing → Previous Invoices; that list is PayHOA's own bills to your association.
Bill a special assessment
A special assessment is billed as an invoice, the same way as any other charge. PayHOA has no separate special-assessment screen: you create a one-time invoice for the units that owe it, or a recurring invoice with an end date when owners pay it in installments.
To bill a special assessment in one payment:
Click Invoices → Create an invoice, tick the units that owe the assessment and click Save selected units.
Click Add charge and give it a Charge title owners will recognize, such as Special assessment: roof replacement, and a Charge description.
Pick the Revenue category. To report the assessment separately from dues, add an income category for it first, such as Special Assessments. See Add, edit, nest, delete and restore categories.
Pick the Deposit bank account. It can be a different account from the one your dues go to, for example your reserve account, as long as that account is set up to receive deposits. (If your association uses Treasury, the field isn't shown and the money goes to your Treasury account.)
Under Charge each unit, choose The same amount, or A different amount if units owe different shares.
Leave How often on One time, set the Active date and Due date, and add Late fees if the assessment should have them.
Click Save charge, then Submit.
To bill a special assessment in installments:
For many units: in step 6, set How often to Monthly (or another frequency) instead, set Ends → On a date, and make the End date the billing date of the last installment. Enter the amount of one installment, not the whole assessment. Click Show extended schedule to check that it lists exactly the installments you want. See Set up a recurring invoice.
For one unit: bill the whole assessment as a one-time invoice, then split that owner's invoice with ⋯ → Payment plan. See Set up a payment plan.
To let each owner choose: pay in full (with an early payment discount) or pay in installments:
Bill the whole assessment once, as a one-time invoice to every unit, as in the steps above. Turn on Early payment discount if owners who pay in full by a date should pay less, and Late fees if the full amount should get a fee after the due date. See Offer an early payment discount and Add late fees.
Owners who pay in full need nothing more: the discount comes off if they pay by the deadline, and the late fee applies if they're late.
When an owner asks for installments, split that owner's invoice with ⋯ → Payment plan, and set the number of payments, their amounts and their dates. This is done one unit at a time and needs Payments write access.
The installments are new invoices that replace the original, and they don't carry its early payment discount or its late fees. The only late fee on a payment plan is the Late fee per payment you enter on the plan, a flat amount added once to each installment that's late. Balance to split starts at what the owner owes that day; while the early payment discount is still open that's the discounted amount, so if owners paying in installments shouldn't get the discount, type the full amount in Balance to split or set up the plan after the discount deadline. If most owners will pay in installments, bill the installments as a recurring invoice instead, as described above.
Good to know about special assessments:
Dues and a special assessment can't go on one invoice. Each charge is its own invoice, with its own category, deposit account and due date. Invoices that become active for a unit on the same day are sent together in one email, and the owner can pay them together in one payment.
Owners on autopay have the assessment paid by autopay when it comes due, up to their monthly limit. See Invoices: common questions.
Payments you record go to the invoice with the oldest due date first, so a check can pay the assessment before the dues, or the other way round. To choose, see Record a payment and how payments apply.
Keep assessment payments separate from dues. No setting makes a payment go to the assessment ahead of an owner's older unpaid invoices: checks you record, lockbox checks, autopay and account credit all pay the oldest due date first, so for an owner who is behind on dues, the dues are paid first. What you can control:
Where online payments land. Give the assessment its own Deposit bank account. Owners paying online pick the invoices they're paying, and what they pay on the assessment is deposited to that account.
Checks you record. Turn on Specify payment application (Apply to specific charges on the Payments page and on a unit's page) and put the amount on the assessment invoice. A lockbox check or an autopay payment can't be directed this way, and a lockbox check is deposited to the lockbox's bank account whatever the invoice says. If one pays the wrong invoice, see A payment went to the wrong invoice or unit.
What was collected for the assessment, for example to move a month's total to a reserve account. Give the assessment its own Revenue category. Then on Payments, set the dates, click Filters and pick that Revenue category: the Category amount total is the part of each payment that went to the assessment. See Find, filter and export payments. Move the money at your bank and record it as a transfer; see Record transfers between accounts.
A second set of units just for the assessment also keeps the money apart, because a payment recorded on one unit is applied only to that unit's invoices. It has costs: every extra unit counts toward the unit count your subscription price is based on (see How the price follows your unit count), and each home then has two balances, two sets of invoices and two account histories to keep in step. Try the three steps above first.
To see who has paid, click Filters on the Invoices page and set Charge to the assessment's title. See Find, filter and export invoices.
In your books, the assessment is income in the revenue category you picked: on cash basis when each owner pays, on accrual on the invoice's active date. See Cash vs accrual, and the fiscal year. What you spend the assessment on is recorded as an expense in the usual way; PayHOA doesn't tie the two together, so give the project its own expense category if you want to compare them on a report.
Good to know
Dates in the past: when you pick an active date before today, Email invoice on active date switches off by itself ("The active date has passed, so the invoice isn't emailed."), so the invoice is created right away without an email. If you turn the switch back on, the invoice is emailed as soon as it's created. Dates more than a year back warn that they'll change reports for earlier periods; the earliest year allowed is 1990 and the latest is 10 years ahead. See Enter starting balances.
Treasury before verification: if your association uses Treasury and the account isn't set up yet, you can still create invoices. They're saved without a deposit account and PayHOA fills in the Treasury account when payments arrive. While the account is being set up you may see an Account provisioning notice in the form.
Owners with autopay: autopay pays the invoice when it comes due, up to the owner's monthly limit. See Invoices: common questions.
Billing someone who isn't an owner: not possible. Invoices go to a unit's owners. See Invoices: common questions.
One charge, one revenue category: each charge posts to a single revenue category. To split an amount across categories, for example dues and a reserve contribution, add two charges. Each unit then gets one invoice per charge.
Two charges, one invoice? No. Two charges, such as dues and a special assessment, are always two invoices. If they become active on the same day, the owner gets them in one email. See Invoices: common questions.
My bank account isn't in the Deposit bank account list, or I can't select a deposit account: the list shows only accounts set up to receive deposits. Check the account under Settings → Bank Accounts: it should show Deposits enabled. If it shows Deposits disabled with KYC past due, the verification of your association isn't finished; click KYC past due and complete it. See Get paid: deposit accounts and when money arrives. The field can't be left empty ("Pick a deposit account."). See also My bank account is set up, but it's not showing when I create an invoice in Invoices: common questions.
Troubleshooting
This table lists the messages and problems you may meet when you create an invoice, and what to do about each.
Message | What to do |
I created an invoice and it doesn't show up, or the invoice didn't save and I had to enter it again. | An invoice is created in two clicks. Save charge only adds the charge to the list on the Create new invoices page. The invoices are created when you click Submit (Submit 2 invoices, or Submit invoices). After that, watch for the "Creating invoices…" banner on the Invoices page and wait for "All N invoices were created." An invoice with a later active date is on the Outstanding invoices tab as Future. From a unit's page it works differently: Add invoice → Save charge creates the invoice straight away, with no Submit step, and shows "Your charge is being created". Give it a moment, then look on the unit's Current invoices or All invoices tab before entering it again. |
We couldn't confirm the charge was created. Check the list before saving again. | The save may have gone through. Look for the invoice on the unit's All invoices tab (or the Invoices page) first, so you don't bill the owner twice. |
Please select at least one unit to invoice. / At least one unit is required to select for invoice. / Pick at least one unit. | Choose units in Step 1 (or under Bill to) before adding or submitting a charge. |
Pick a deposit account. | Deposit bank account is required unless your association uses Treasury. If the account you want isn't in the list, see My bank account isn't in the Deposit bank account list under Good to know. |
Enter a description. | Charge description is required. |
Enter an amount greater than $0. | $0 invoices aren't allowed. |
Pick a date on or before the due date. | The active date must be on or before the due date. |
Please enter a year between 1990 and [year]. | Dates must fall between 1990 and 10 years from now. |
Fix the highlighted fields to save the charge. | One or more fields above has an error; scroll up to find it. |
Invoices already in progress | Another batch is running (Another invoice batch is being created for this association. You can submit once it finishes.). Submit again when it finishes. If it seems to run for a very long time, see If the invoices aren't on the units yet, or the banner keeps running. |
I added charges but no invoices were created. | Charges on the Create new invoices page aren't saved until you click Submit. If you left the page first, they were discarded; add them again and submit. |
Another admin prepared invoices as a draft for a later date and I can't find the draft. | Invoices have no draft. Charges that were added on the Create new invoices page but never submitted exist only on that person's screen: they aren't saved when the page is closed, and no other admin can see them. Invoices that were submitted with a later active date are visible to every admin with Invoices access straight away, as Future on the Outstanding invoices tab, and a recurring invoice that hasn't billed yet is on the Recurring templates tab. If your colleague's invoices are in neither place, they were never submitted; create them again. |




