The Organization Settings tab holds your association's basic details: its name, EIN, contact details, fiscal year, time zone and logo, the link owners use to sign up, and the addresses printed on letters and invoices. Update these when you first set up PayHOA, and again when your board, address or tax details change.
Before you start: only admins can open organization settings. Click the gear icon at the top right; the Organization Settings tab opens first. See Settings overview.
Each card on this page saves on its own. Change one card, then click that card's Update. You see "Settings were updated." Changes on other cards aren't saved by that click.
Change your association's details
On the Organization Information card, change any of these:
Group Name (required): your association's name as owners see it.
EIN: your association's 9-digit Employer Identification Number, for example 12-3456789. The ⓘ tooltip explains it's your federal tax ID and that your bank keeps it on file if you're unsure. You need it to download a 1096 for your 1099s; see File 1099s.
Organization Email
Phone
Fax (optional): this field isn't saved at the moment. A number you type here is gone when you reload the page.
Fiscal Period Start: the month your fiscal year begins. It changes how fiscal-year reports are grouped, including past years. See Cash vs accrual, and the fiscal year.
Timezone: see the next section.
Click Update.
If a value isn't valid, you see "There is a problem with some of the provided values. Please double check the form and try again." Check the EIN has 9 digits and the email is a full address.
Your Organization Account Id
Organization Account Id: is your association's PayHOA ID number. You can't change it. Its tooltip says: "This internal ID may be helpful to provide to PayHOA customer service if support is needed." Include it whenever you contact PayHOA support.
Set your time zone
Your association has its own time zone. Pick it under Timezone on the Organization Information card, for example (UTC-05:00) New York, and click Update.
PayHOA uses your association's time zone for the association's dates and times, including:
the dates and times shown in PayHOA, such as payment, comment and history times. Everyone in the association sees the association's time, wherever they are;
the day a recurring charge is created, and the day a charge becomes due, past due or gets a late fee;
when invoices are emailed (between 6am and 5pm your time; see How invoices are sent);
when automatic payment and past-due reminders go out (see Automatic past-due reminder emails);
the send time of a scheduled email (see Schedule an email, or cancel a scheduled one);
calendar events and amenity booking times;
the date ranges on reports.
Your own computer's or phone's clock doesn't change any of these.
Add or change your logo
Your logo shows at the top of every automatic email PayHOA sends for your association, and at the top of the menu in PayHOA in place of the PayHOA logo.
On the Organization Information card, drag an image onto Logo, or click Browse files and pick one. Use a PNG, JPG, GIF or WEBP file. The recommended size is 225 x 94 pixels.
In the Organization logo window, check how it fits and click Save logo.
The logo saves right away; you don't need to click Update. You see "The organization logo has been updated to your image."
To replace it, click Change logo. To go back to no logo, use the remove control on the logo itself ("The organization logo has been reset to default.").
You can also change the logo on the Emails tab, under Your email look. It's the same logo. See Customize PayHOA's automatic emails.
Share your sign-up link
Your association's sign-up link and QR code are on the Your Sign Up Link card: click the gear icon at the top right, and the card is on the Organization Settings tab, which opens first. The card has a link owners can use to create their own PayHOA login for your association.
Copy the link: click it. You see "Sign up link has been copied to your clipboard. Paste it into messages to invite owners." Paste it into an email, newsletter or your website.
Get a QR code: click Download QR Code. You get a PNG image to put on flyers, newsletters or a notice board. Scanning it opens your sign-up page. So yes, there is a QR code members can scan to join your association in PayHOA.
The link includes your association's name, but renaming the association doesn't break links you've already shared.
What happens when an owner signs up with your sign-up link or QR code depends on the email they enter:
The email isn't on anyone's record in PayHOA. Their request waits on People → New registrations, and you approve them before they get in. See Approve or deny new registrations.
The email is already on a person's record, for example because you added or imported that owner with it. There is no request and nothing to approve: PayHOA sends that person the activation email straight away, and they see Registration email is on its way. The exception is an email that is already a PayHOA login used in more than one association: they see the same message, but no email is sent. That person already has a login, so they sign in with it or click Forgot your password? on the sign-in page.
To invite owners who are already in PayHOA, see Invite owners to the portal.
Set your mailing address
The Mailing Address card is your association's own address. PayHOA uses it:
as the return address on letters sent from the Mail Room (see Mail Room: common questions);
at the bottom of every automatic email;
when you click Use Mailing Address on the remittance card.
To change it:
Fill in Address Line 1, Address Line 2 (optional), City, State/Province and Zip Code.
Click Update.
Keep these limits in mind:
City takes letters and spaces only. Leave out periods, hyphens and apostrophes: type St Louis, not St. Louis.
Zip Code takes 5 digits. ZIP+4 isn't accepted on this card.
Use a US address. Canadian postal codes aren't accepted.
If a field breaks one of these limits, you see "There is a problem with some of the provided values. Please double check the form and try again." and the field is marked. Fix it and click Update again.
Important: you only see "Settings were updated." when the address is saved. If you see neither message after you click Update, the save failed without saying so. Reload the page and check the address stuck.
Does PayHOA give us a mailing address or P.O. box?
No. PayHOA doesn't provide a mailing address, a P.O. box or a mail-forwarding service for your association's own incoming mail, such as letters from owners, vendor invoices, bank and insurance mail or legal notices. PayHOA has nowhere to receive, scan or forward that mail. Your association's address is the one you enter on the Mailing Address card: use an address your board controls, such as an officer's address, your management office or a P.O. box you rent from the post office.
The only P.O. box PayHOA sets up is a lockbox address, and a lockbox is for owners' check payments only. If your association banks with Alliance Association Bank (Western Alliance), owners mail their checks and payment coupons to a Western Alliance lockbox, an address that usually starts c/o PayHOA followed by a P.O. box. That is your Payment Remittance Address, not your mailing address. Don't give it to vendors, other banks, insurers or anyone else as your association's address. See Lockbox payments and An address that reads "c/o PayHOA".
Vendors don't need to mail invoices at all: your association has its own payables email address, and an invoice emailed to it lands in Payables → Inbox. See Get vendor invoices into PayHOA.
Set where owners mail payments
The Payment Remittance Address card is the address printed on invoices for owners who mail checks. Its hint says: "Specify the remittance address to be printed on invoices."
Fill in the address, or click a shortcut:
Use Mailing Address copies your mailing address.
Use Lockbox Address copies your lockbox address. It only shows if your association uses a lockbox.
Click Update.
The same city rule applies. Zip Code here accepts 5 digits or ZIP+4, for example 12345-6789. As on the mailing address card, wait for "Settings were updated." before you leave the page.
If you use a lockbox
If the address doesn't match your lockbox address exactly, you see: "The remittance address entered does not precisely match the lockbox address. Please ensure this is the address where you want payments to be delivered."
Clicking Update then opens Change Remittance Address?: "Payments sent to an address other than your Lockbox address may not be processed correctly." Click Continue Anyway to save the new address, or Cancel to put the old one back.
Checks mailed anywhere other than the lockbox aren't deposited by the lockbox. Only change it if you mean to collect checks somewhere else. See Lockbox payments.
The warning shows and you didn't change anything, or the Alliance Banking card shows a different P.O. box from the Payment Remittance Address. Which is right? Don't click Use Lockbox Address or Continue Anyway until you know which address your owners should mail checks to; the address you save is printed on invoices. Two things can make the addresses differ without anyone editing them:
Your association has both lockboxes. If you still have the Lockbox Service card (PayHOA's older lockbox) and the Western Alliance lockbox is also turned on in the Alliance Banking card, the warning and Use Lockbox Address go by the older lockbox's address, not the one shown under Payment Remittance Address on the Alliance Banking card. So a remittance address that matches one of them shows as a mismatch with the other.
The lockbox address on the Alliance Banking card is wrong or out of date. That address isn't typed in by your association. It follows the Property Management Company ID and Lockbox Association ID, which PayHOA sets ("These values are managed by PayHOA. Please contact us if you believe them to be incorrectly configured."), and the Lockbox Location chosen on the card.
In either case, contact PayHOA support with your Organization Account Id and both addresses, and ask which P.O. box your owners' checks should go to, before you change the remittance address or tell owners anything. Only PayHOA can correct the IDs.
The Lockbox Service card (older PayHOA lockbox)
You only see Lockbox Service if your association is enrolled in PayHOA's older lockbox. It shows Enabled, your Lockbox Remittance Address and an Un-enroll button. That lockbox closes at the end of December 2026; see Lockbox payments for what happens next and how to move to the Western Alliance Bank lockbox.
Before you click Un-enroll, read the warning in the Un-enroll from Lockbox Service? window:
"Any payments received after today will not be deposited." You may still be billed for payments received that day.
"This cannot be undone from the app." The card disappears from your settings and you can't enroll again yourself: the window says re-enrolling requires PayHOA support. This lockbox closes at the end of December 2026, so un-enroll only when you're ready to stop using it for good.
To un-enroll:
Click Un-enroll, then Yes, un-enroll.
Change your Payment Remittance Address straight away. Un-enrolling doesn't change it, so your invoices keep printing the lockbox PO box until you do. Click Use Mailing Address, or enter where you want checks sent, and click Update.
Tell owners where to mail checks from now on, including anyone who pays through their bank's bill-pay.
Fees and the Alliance lockbox
Two more cards on this tab have their own articles:
Fee Settings: choose whether your association absorbs processing fees or charges owners a convenience fee. The card shows the rates, for example "A 3.5% + 50¢ processing fee is added to each card payment." and "A $2.45 processing fee is added to each ACH payment." See Processing fees and the convenience fee.
Alliance Banking: shows your Western Alliance Bank lockbox IDs, which PayHOA sets for you. See Lockbox payments and Bank with Alliance Association Bank.
Troubleshooting
What you see | What to do |
Update stays greyed out after an error | Reload the page, fix the value and try again. |
"There is a problem with some of the provided values. Please double check the form and try again." | A field on that card isn't valid. Check the EIN has 9 digits, the email is complete and Group Name isn't empty. |
"We were unable to save your organization's settings." | The save failed. Reload and try again. If it keeps happening, contact PayHOA support with your Organization Account Id. |
"There is a problem with some of the provided values..." on an address card | Remove periods, hyphens and apostrophes from City (St Louis, not St. Louis), and use a 5-digit ZIP on Mailing Address. |
You click Update on an address card and see no message, and the old address is back after a reload | The save failed without a message. Check every required field, then try again. If it keeps happening, contact PayHOA support with your Organization Account Id. |
Mail Room letters fail with your organization's mailing address is incomplete | Fill in every required field on Mailing Address and click Update. |
Owners still mail checks to an old lockbox | Check Payment Remittance Address and update it. Then tell owners the new address. |


