Skip to main content

Keep the fuel book: tanks, fill-ups and dips

Set up fuel tanks and record deliveries, machine fill-ups, transfers and dips in the fuel book.

P
Written by Phase Team

Inventory → Fuel is the farm's fuel book. It holds every delivery, fill-up, transfer and dip, with the pump's meter, the machine and who did it. Use it to replace a paper fuel book and to check what each truck, header or ute really uses.

The quick answers. Yes, Phase can log the litres every time a machine fills up, show each machine's fuel use, and show what is left in each tank. Set each tank up, record a delivery into it, then use Fill a machine at the bowser. It asks one question at a time: where the fuel went, which tank, how many litres (with the pump meter under them), the machine's hours, then when and who.

Where to find it

  • On a computer: select Inventory in the top bar, then Fuel.

  • On a phone: tap Inventory in the bottom bar, tap the section name at the top of the page (such as Chemicals) and choose Fuel.

Each tank has a card showing what is in it and its last pump reading, such as "Pump at 737,560".

Before you start

  • Recording, changing and deleting lines needs permission to edit Inventory. Owners, co-owners and admins always have it; staff have it unless it was turned off for them. Anyone who can see Inventory can read the log.

  • Your trucks, utes and headers live in More → Daily work → Machinery → Machines. A machine that isn't there yet can be added while you record the fill-up (see "Add a machine that isn't on the list" below).

Set up your fuel tanks

  1. Open Inventory → Locations and select Add location.

  2. Type a Name, such as "Diesel tank" or "Fuel trailer".

  3. Under Type, choose Fuel tank.

  4. Choose its Fuel: Diesel, Petrol or AdBlue.

  5. Tick It moves for a fuel trailer, tanker or ute tank that takes fuel out to the machines.

  6. Enter its Capacity in litres if you want the card to show how full it is.

  7. Select Add location, or Save and add another for the next tank.

A fuel tank holds only fuel. Chemicals and other products can't be stored in one, and only fuel counts in its level and its log.

Record a fuel delivery

  1. In Inventory → Fuel, select Delivery on the tank's card (or Delivery on the tank's Phase tag).

  2. How much came in? Type the Litres on the docket. It asks which fuel only when the tank has none set up yet; Not Diesel? Change the fuel changes it. Under the box are what Phase has in the tank, what it will have After, and what the Tank holds. Filling a machine instead? sits under the box.

  3. When, and a note: the day, the Time, and a note such as the supplier or docket number.

  4. Check the card and select Save.

Record a delivery into each new tank first, so Phase knows what is in it. Litres that look like the tank's pump reading, or more than the tank holds, are named on the check, and the button reads Record anyway.

Record a fill-up

  1. Select Fill a machine. You can also use Draw on a tank's card, Fill a machine on a fuel tank's Phase tag, Record a fill-up on a machine's Fuel tab, or Fuel up on a machine's Phase tag.

  2. Where did the fuel go? Leave it on A machine and pick it. The machines filled most recently come first; with many, type part of a name, make, model or rego in the search box.

  3. Out of which tank? Pick the tank. A farm with one tank is never asked, and scanning a tank's tag skips this.

  4. How many litres? Type the litres into the machine. Numbers get their commas as you type (749,836). The pump meter is optional. A tank whose pump has been read before shows Pump meter (optional) under the litres: the last reading, a box for the reading now, and how much was Pumped between them. Typing the reading fills in the litres, marked From the pump. A tank with no pump readings shows a Pump meter reading link instead.

  5. Hours on the machine (or Odometer on it), optional. Only a machine is asked this.

  6. When and who: the day, the Time, and who it was Filled by: anyone on the team, or Someone else for a contractor or casual (type their name). More details holds For a job (optional) and a Note.

  7. Check the card and select Save.

Say it instead. On the first step, tap Say it instead and say the fill-up: "filled the header with 300 litres out of the trailer at 4512 hours". Phase picks out the litres, machine, tank, fuel and hours, and Fill it in puts them in to check and save.

When a number looks wrong. The box gets a dashed outline and one short line under it, with a button that fixes it: Move it to the pump meter (litres that look like the pump's running total), Move it to litres (a small number typed as the pump reading), or Clear it. A pump reading lower than the last one has to be fixed or cleared before you go on. If the litres look like the pump reading, or are more than the tank holds, the check says so and the button reads Record anyway.

The machine's meter is its hours or odometer, not the pump's. Phase uses it to work out fuel use, and warns you if it is lower than the last fill-up. When it is ahead of what Phase has, a tick box such as "Update Ute 2 to 145,200 km" moves the machine's meter on too (people who can edit the farm only).

Add a machine that isn't on the list

A contractor's truck or a new ute can be added without leaving the fill-up. Select Add a machine under the machine list, type the Name, choose the Type (and Make, Model or Rego if you have them) and select Add machine. It is saved to Machinery → Machines and picked for the fill-up. Add a machine shows only to people who can edit the farm.

Fill the fuel trailer from the main tank

Select Actions → Transfer. Where did the fuel go? opens on A tank: choose the trailer or tanker under Into, pick the main tank under Out of which tank?, enter the litres and who it was Done by, and save. Then record each fill-up from the trailer as usual, choosing the trailer as the tank.

Record fuel that didn't go into a machine

For fuel such as jerry cans for a pump: select Fill a machine or Draw, choose Something else under Where did the fuel go?, say What was it for?, pick the tank and enter the litres. These show as Other draw in the log.

Do a dip reading

  1. Select Dip on the tank's card (or Dip reading on its tag). It is greyed out until something is recorded in the tank.

  2. What does the dip read? Type the Litres in the tank now. Under it are what Phase has and how much the dip changes it, such as −190 L.

  3. Check the day, the time and a note, then select Save.

Phase sets the tank to your reading and records the difference. A dip that matches what Phase has saves nothing. A dip above what the tank holds asks Record anyway. A dip far below what Phase has asks whether you meant litres, not centimetres or a percentage, but can still be saved.

Change or delete a line

  1. Tap the line in the Log: a fill-up, draw, transfer, delivery or dip. A fill-up can also be tapped on a machine's Fuel tab.

  2. Make the change and select Save changes. To delete it, select Delete and confirm. A deleted fill-up's litres go back into the tank.

  • A delivery opens Edit delivery with its fuel, litres, date, time and note.

  • A dip opens Edit dip. Its date, time and note can be changed, and it can be deleted, but its reading can't be retyped: delete it and do a new dip.

  • A delivery that came in on an invoice or through Add stock is changed on the fuel's product in Inventory, and the log says so.

  • A fill-up whose litres look like the pump reading carries a Litres look like the pump meter badge. Tap it to fix the line.

Read the fuel book

Dates: Last 30 days, This month, Last 3 months, This financial year (from 1 July) or All time.

Totals: Into machines, Delivered (with litres moved between tanks), No machine named and Worth a look.

Filters: Machine, Tank and Person narrow everything below them. Machine is a search box: type part of a machine's name, make, model, fleet number or rego and pick it, and clear it to see Every machine again. Tap a tank's card to show only that tank, and again for all of them.

Views:

  • Log: every line, newest first, grouped by day with the litres out and in. Pump readings and machine hours or odometer show where someone entered them.

  • Machines: the litres each machine took and what it really burns, in L/100 km (odometer) or L/hr (hour meter), beside the figure you set. A truck or ute costed per km also shows its running cost.

  • Tanks: each tank's start, deliveries, transfers, fuel into machines, other draws, dip changes and end. Where the pump has readings, it compares what the pump moved with what was logged.

  • People: how much each person filled.

Spot fuel going missing

None of these says fuel was stolen. Together they tell you where to look.

  • More than usual: a fill-up used more than one and a half times that machine's usual since the fill before: a missed entry, a part fill, or fuel that went somewhere else.

  • Meter went backwards: the machine's reading is lower than the last one.

  • Pump shows more than logged: the pump moved more fuel between its readings than the book holds. Fuel left the tank without being written down.

  • Pump meter went backwards: a pump reading lower than the one before.

  • Short at dips: a dip found less fuel than Phase had recorded. It shows under Worth a look, and the Tanks view says how much.

Export the fuel log

Select Actions → Export. Phase downloads a CSV spreadsheet of the dates and filters you chose: one row per line, with each fill's fuel use, its Pump meter reading and any flag.

Good to know

  • A machine's own Fuel tab shows its fill-ups, litres this financial year and real fuel use. Open in the fuel log shows only that machine here.

  • Fuel use needs two fill-ups with a machine meter reading. It is most accurate when each fill-up fills the tank.

  • Diesel, petrol, AdBlue and oils as products (the things you order and price) are in Inventory → Parts & other, under Fluids & fuel.

  • A tank that moves shows a Mobile badge.

  • A fuel tank's screen in Inventory → Locations has Fuel log for this tank.

  • Draws recorded before 2 October 2026 have no machine or person. They show as Other draw, and as "Not recorded" in People.

  • Older pump readings typed into a fill-up's note were moved into its pump meter reading where they fit the tank's other readings. The note is unchanged.

  • Every fuel line has a time. A fill-up someone forgot can be added later with the day and time it happened, and it sits in its place in the log. The CSV export has a Time column. Lines from before the time was added have none.

  • Fuel in these steps shows in whole litres (11,990 L), not kilolitres.

If something doesn't look right

  • There's no Fill a machine button. You don't have permission to edit Inventory. Ask the owner or an admin.

  • It says there are no fuel tanks yet, or "Phase does not know what fuel is in" a tank. Add the tank as a Fuel tank in Inventory → Locations, then record a Delivery into it.

  • A fill-up shows no meter reading. The pump's reading goes under the litres, in Pump meter (optional), or tap Pump meter reading. The machine's own hours or odometer is the next step. Tap the fill-up in the log to add either.

  • A tank card says it is below empty on paper, or holds more than it can. A line in the log is probably wrong, often a fill-up recorded as fuel going into the tank. Tap the tank to see its lines, fix or delete the wrong one, then do a dip.

  • The pump reading was typed as the litres. The line shows Litres look like the pump meter. Tap it and use Move it to the pump meter.

  • The machine isn't in the list. Type part of its make, model, fleet number or rego instead of its name. Still not there? Select Add a machine under the box, or add it in More → Daily work → Machinery → Machines. Retired machines aren't offered.

  • The tank card says "Capacity not set". Open the tank in Inventory → Locations, choose Edit location and enter its capacity.

Related

Did this answer your question?